K.-H. Döhle, A. Rahmel, M. Schmidt, M. Schütze: Two Different Test Rigs for Creep Experiments in Aggressive Environments; in "Corrosion and Mechanical Stress at High Temperatures", Hrsg. V. Guttmann, M. Merz, Applied Science Publishers, London (1981) 441
U. Bruch, K. Döhle, J. Pütz, A. Rahmel, M. Schütze, K.D. Schuhmacher: Comparison of the Corrosion Behaviour of Different High Temperature Alloys with and without Superimposed Creep Deformation in an Artificial Steam Reformer Atmosphere; in "Metallic Corrosion 1984", Bd. III, National Research Council Canada, Toronto (1984) 325
M. Schütze: The Influence of High Temperature Corrosion on Creep and Fracture Behaviour of Heat Resistant Steels; in "Creep and Fracture of Engineering Materials and Structures", Hrsg. B. Wilshire, D. Owen, Pineridge Press, Swansea (1984) 801
B. Ilschner, M. Schütze: Interaction Between Oxidation (Sulfidation, Carburization) and Creep; Oxidation of Metals 23 (1985) 287-292
J. Barbehön, A. Rahmel, M. Schütze: Behaviour of Alloy 800 H under Cyclic Deformation and Superimposed Oxidation; in "High Temperature Alloys for Gas Turbines and Other Applications 1986", Hrsg. W. Betz et al., D. Reidel Publishing Company, Dordrecht (1986) 1267
V. Guttmann, M. Schütze: Interactions of Corrosion and Mechanical Properties; in "High Temperature Alloys for Gas Turbines and Other Applications 1986", Hrsg. W. Betz et al., D. Reidel Publishing Company, Dordrecht (1986) 293
J. Barbehön, A. Rahmel, M. Schütze: Investigations on the Interaction of LCF and Oxidation; in "Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials", Hrsg. K.-T. Rie, Elsevier Appl. Sci., London (1987) 371
M. Welker, M. Schütze, A. Rahmel: Untersuchungen zur Wechselwirkung zwischen Korrosion und Rißfortschritt bei Hochtemperatur-Kriechverformung; in "Bruchvorgänge 1987", DVM, Berlin (1987) 345
M. Schütze: Anrißentstehung und Anrißwachstum unter korrosiven Bedingungen bei hohen Temperaturen; in "Korrosion und Bruch", DVM, Berlin (1988) 279
M. Schütze: Concept for the Assessment of the Contribution to Damage by the Interaction of High Temperature Corrosion and Mechanical Stresses; Proc. Conf. 9th Europ. Congr. Corr., Bd. I, Europ. Federation of Corrosion (1989) FU-202
M. Schütze: The Role of the Interaction of Corrosion and Mechanical Factors for Degradation of Materials; Materials Science and Engineering A 121 (1989) 563
M. Welker, A. Rahmel, M. Schütze: Oxidation and Nitridation of Alloy 800 H at a Growing Creep Crack and for Unstressed Samples; Metallurgical Transactions A 20 (1989) 1541
M. Welker, A. Rahmel, M. Schütze: Investigations on the Influence of Internal Nitridation on Creep Crack Growth in Alloy 800 H; Metallurgical Transactions A 20 (1989) 1553
M. Schütze, H. Fellmann: Investigations on Creep Crack Growth in Air and Oxygen + SO₂; in "High Temperature Materials for Power Engineering 1990", Hrsg. E. Bachelet et al., Kluwer Academic Publ., Dordrecht (1990) 199
M. Schütze: The Interaction of High Temperature Corrosion and Mechanical Factors; in "High Temperature Corrosion and Protection", Hrsg. H. Guan et al., Liaoning Science and Technology Publ., Shenyang (1991) 359
M. Schütze, H. Fellmann, B. Glaser: Kriechrißwachstum in Luft und SO₂-haltiger Umgebung; Materialprüfung 33 (1991) 11
M. Schütze, H. Fellmann, B. Glaser: Untersuchungen zum Kriechrißwachstum in Luft und O₂-SO₂; in "Bruchvorgänge 1991", DVM, Berlin (1991) 357
M. Welker, H. Fellmann, B. Glaser, M. Schütze: Creep Crack Growth of Materials for the Chemical and Petrochemical Industries; in "Heat-Resistant Materials", Hrsg. K. Natesan, D.J. Tillack, ASM International, Ohio (1991) 477
M. Schütze, H. Fellmann: Corrosion Processes at Growing Creep Cracks; in "Corrosion - Deformation Interactions", Hrsg. T. Magnin, J.M. Gras, Les Editions de Physique, Les Ulis (1992) 565-576
M. Schütze, B. Glaser: The Role of Environmental Effects for the Mechanical Behaviour of Materials at High Temperature; in "Aspects of High Temperature Deformation and Fracture in Crystalline Materials", Hrsg. Y. Hosoi et al., The Japan Institute of Metals, Sendai (1993) 561-567
M. Schütze: Hochtemperaturkorrosion und mechanische Beanspruchung; in "Korrosion verstehen - Korrosionsschäden vermeiden", Hrsg. H. Gräfen, A. Rahmel, Verlag Irene Kuron, Bonn (1994) 402-410
M. Schütze, B. Glaser: The Influence of Cl-Containing Atmospheres on Creep Crack Growth at 800ºC; in "Heat-Resistant Materials II", Hrsg. K. Natesan et al., ASM International, Materials Park (Ohio) (1995) 343-351
M. Schütze, V. Guttmann, M.F. Stroosnijder: Simultaneous Corrosion and Mechanical or Thermal Stresses; in "Guidelines for Methods of Testing and Research in High Temperature Corrosion", Hrsg. H.J. Grabke, D.B. Meadowcroft, European Federation of Corrosion Publications No. 14, The Institute of Materials, London (1995) 104-120
J.P.T. Vossen, M. Schütze: Limits for the Recovery of Chromium Oxide Scales on Heat-resistant Stainless Steels in Air With and Without Superimposed Mechanical Load at 650°C; Proc. Int. Conf. Corrosion-Deformation Interactions (CDI), Bd. IV, Paper P 40 Centre Français de l'Anticorrosion/Société de Chimie Industrielle, Paris (1996)
A. Jeutter, M. Schütze: The Influence of HCl-containing Atmospheres on High Temperature Corrosion of Coated and Uncoated Nickel-Base Superalloys under Complex Loading Conditions; Proc. EUROMAT 97, Bd. 1, Netherlands Society for Materials Science, Zwijndrecht/NL (1997) 223-226
M. Schütze: Werkstoffverhalten bei Wechselwirkung von Hochtemperaturkorrosion und mechanischer Belastung; in "Hochtemperaturkorrosion in der Prozeßtechnik", TAW-Verlag, Wuppertal (1998) 1-23
M. Schütze, A. Jeutter: High temperature corrosion resistance of gas turbine materials and coatings under the influence of Cl-contaminations; in "Materials for advanced power engineering 1998", Hrsg. J. Lecomte-Beckers et al., Reihe Energietechnik, Bd. 5, Forschungszentrum Jülich (1998) 1543-1552
A. Jeutter, M. Schütze: The Role of HCl Impurities in the Environment and Y for the High Temperature Corrosion of CoNiCrAl(Y)-Coatings on a Ni-base Superalloy under Complex Loading Conditions; Materials at High Temperatures 16 (1999) 71-86
A. Zeller, F. Dettenwanger, M. Schütze: Influence of Water Vapor on the Creep Behaviour of TiAl; in "Gamma Titanium Aluminides 1999", Hrsg. Y.-W. Kim et al., TMS, Warrendale (1999) 761-768
M. Schütze: Hochtemperaturkorrosion bei gleichzeitiger mechanischer Beanspruchung; in "Korrosion und Korrosionsschutz", Hrsg. E. Kunze, Wiley-VCH, Weinheim (2001) 648-687
A. Zeller, F. Dettenwanger, M. Schütze: Influence of water vapour on the creep and fatigue properties of TiAl; Intermetallics 10 (2002) 33-57

Mechanische Eigenschaften von Oxidschichten

M. Schütze, A. Rahmel: Das Verhalten von Oxidschichten unter mechanischer Belastung; in "Aufbau von Oxidschichten auf Hochtemperaturwerkstoffen und ihre technische Bedeutung", Hrsg. A. Rahmel, Deutsche Gesellschaft für Metallkunde, Oberursel (1983) 245
M. Schütze, A. Rahmel: Influence of Constant Strain Rates on Growth and Cracking Behavior of Oxide Scales and on Internal Corrosion of a 18Cr-0.8Al-1.5Si Steel; in "High Temperature Corrosion", Hrsg. R. Rapp, NACE, Houston (1983) 421
M. Schütze, A. Rahmel: Observations on the Cracking Behaviour of Oxide Scales During Creep of the Base Metal and on Creep Enhanced Internal Corrosion; in "Corrosion Resistant Materials for Coal Conversion Systems", Hrsg. D. Meadowcroft, M. Manning, Applied Science Publ, London (1983) 439
M. Schütze: Deformation and Cracking Behavior of Protective Oxide Scales on Heat-Resistant Steels under Tensile Strain; Oxidation of Metals 24 (1985) 199
M. Schütze: The Healing Behavior of Protective Oxide Scales on Heat-Resistant Steels after Cracking under Tensile Strain; Oxidation of Metals 25 (1986) 409
M. Schütze: Computer Simulation of Oxide Scale Cracking/Healing Processes under Substrate Creep at High Temperatures and Comparison of the Results to Experimental Data; Werkstoffe und Korrosion 38 (1987) 637
M. Schütze: The Limits to the Protective Effect of Oxide Scales on High Temperature Materials Which are Subjected to Strain; in "High Temperature Alloys - Their Exploitable Potential", Elsevier Applied Science, London (1987) 79
J. Barbehön, A. Rahmel, M. Schütze: Behavior of the Scale on a 9.5Cr Steel under Cyclical Deformation of the Base Metal; Oxidation of Metals 30 (1988) 85
M. Schütze: Stresses and Decohesion of Oxide Scales; Materials Science and Technology 4 (1988) 407
W. Christl, A. Rahmel, M. Schütze: Behavior of Oxide Scales on 2.25Cr-1Mo Steel During Thermal Cycling. I. Scales Formed in Oxygen and Air; Oxidation of Metals 31 (1989) 1
W. Christl, A. Rahmel, M. Schütze: Behavior of Oxide Scales on 2.25Cr-1Mo Steel During Thermal Cycling. II. Scales Grown in Water Vapor; Oxidation of Metals 31 (1989) 35
M. Schütze: Plasticity of Protective Oxide Scales; Materials Science and Technology 6 (1990) 32
I. Küppenbender, M. Schütze: Deformation and Cracking Behaviour of NiO Scales on Nickel; Proc. EUROCORR '91, GTE, Budapest (1991) 342
M. Schütze: Assessment of the Limits to the Protective Effect of Oxide Scales in High Temperature Technology, Set by Deformation of the Substrate Material; Int. J. Pres. Ves. Pip. 47 (1991) 293
A. Rahmel, M. Schütze: Mechanical Aspects of the Rare-Earth Effect; Oxidation of Metals 38 (1992) 255
M. Schütze: Failure of Oxide Scales on Advanced Materials Due to the Presence of Stresses; in "High Temperature Corrosion of Advanced Materials and Protective Coatings", Hrsg. Y. Saito et al., Elsevier, Amsterdam (1992) 39
M. Schütze: Fundamental Aspects of High Temperature Corrosion and The Role of Surface Layers in Corrosion-Deformation Interactions; in "Corrosion-Deformation Interactions", Hrsg. T. Magnin, J.M. Gras, Les Editions de Physique, Les Ulis (1992) 703
M. Schütze: Mechanical Aspects of High-Temperature Oxidation; Corrosion Science 35 (1993) 955-963
M. Walter, M. Schütze, A. Rahmel: Behavior of Oxide Scales on 12Cr-1Mo Steel During Thermal Cycling; Oxidation of Metals 39 (1993) 389-410
M. Walter, M. Schütze, A. Rahmel: Behavior of Oxide Scales on Alloy 800 H and HK 40 During Thermal Cycling; Oxidation of Metals 40 (1993) 37
A.M. Huntz, M. Schütze: Stresses Generated During Oxidation Sequences and High Temperature Fracture; Mater. High Temp. 12 (1994) 151-161
I. Küppenbender, M. Schütze: The Deformation Behavior of NiO Scales on Ni in Argon and Air at Temperatures from 20 to 800ºC With Respect to the Relief of Growth Stresses; Oxidation of Metals 42 (1994) 109-144
S.R.J. Saunders, M.M. Nagl, M. Schütze: Measurement Methods for the Determination of Fracture Strain; Mater. High Temp. 12 (1994) 103-109
M. Schütze: An Approach to a Global Model of the Mechanical Behaviour of Oxide Scales; Mater. High Temp. 12 (1994) 237-247
M. Schütze, M. Schmitz: The Oxidation Behaviour of Titanium Aluminide under the Effect of Mechanical Stresses; Trans. Mat. Res. Soc. Jpn. 14A (1994) 219-224
M. Schütze: Mechanical Properties of Oxide Scales; Oxidation of Metals 44 (1995) 29-61
M. Schütze, M. Schmitz-Niederau: Interaction of Mechanical Loading and Oxidation at 900ºC for TiAl; in "Gamma Titanium Aluminides", Hrsg. Y.-W. Kim, R. Wagner, M. Yamaguchi, TMS Warrendale (1995) 83-92
M. Schütze, J.R. Nicholls: Behavior of Scales Under Mechanical Loading; Oxidation of Metals 45 (1996) 605-613
C. Bruns, M. Schütze: Messung der Haftfestigkeit von Deckschichten mittels Schallemissionsanalyse; Berichtsband 58 "Statusberichte zur Entwicklung und Anwendung der Schallemissionsanalyse", Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V. Berlin (1997) 235-237
M. Schütze, C. Bruns: Stresses and Adhesion of Surface Scales; in "Corrosion-Deformation Interactions", Hrsg. T. Magnin, EFC-Publ. No. 21, The Institute of Materials, London (1997) 308-318
M. Schütze, W. Przybilla: The role of stresses in oxidation and shape stability; in "Metal-supported automotive catalytic converters", Hrsg. H. Bode, Werkstoff-Informationsgesellschaft, Frankfurt am Main (1997) 163-177
W. Przybilla, M. Schütze: Monitoring stress relaxation processes in growing oxide scales via acoustic emission analysis; Proc. of the 23rd Europ. Conf. on Acoustic Emission Testing, Hrsg. P. Tscheliesnig, TÜV Österreich, Wien (1998) 74-79
M. Schütze: Mechanical Interactions in Oxide Scales; in "High Temperature Corrosion and Materials Chemistry", Hrsg. P.Y. Hou et al., The Electrochem. Soc., Pennington (1998) 1-17
M. Schmitz-Niederau, M. Schütze: Cracking and Healing of Oxide Scales on Ti-Al Alloys at 900°C; Oxidation of Metals 52 (1999) 241-276
C. Bruns, M. Schütze: Investigation of the Mechanical Properties of Oxide Scales on Nickel and TiAl; Oxidation of Metals 55 (2001) 35-68
M. Schütze: Hochtemperaturoxidation unter zyklischer Temperaturbeanspruchung; in "Korrosion und Korrosionsschutz", Hrsg. E. Kunze, Wiley-VCH, Weinheim (2001) 687-700
M. Schütze, S. Ito, W. Przybilla, H. Echsler, C. Bruns: Test Methods and Data on the Mechanical Properties of Protective Oxide Scales; Materials at High Temperatures 18 (2001) 39-50
W. Przybilla, M. Schütze: Role of growth stresses on the structure of oxide scales on nickel at 800 and 900°C; Oxidation of Metals 58 (2002) 103-145
W. Przybilla, M. Schütze: Growth stresses in the oxide scales on TiAl alloys at 800 and 900°C; Oxidation of Metals 58 (2002) 337-359
H. Echsler, M. Schütze, S. Ito: Deformation and fracture properties of oxide scales on mild steel at elevated temperatures; Current Advances in Materials and Processes (ISIJ) 16 (2003) 1329-1332
M. Schütze: Stress controlled mechanisms in the oxidation of metallic alloys; Proc. Int. Symp. "Corrosion Science in the 21st Century", UMIST, Manchester 2003 (CD), Journal of Corrosion Science and Engineering 6 (2003) 1-31
G. Wright, M. Schütze, S.R. Paterson, P.F. Tortorelli, R.B. Dooley: Progress in prediction and control of scale exfoliation on superheater and reheater alloys; Proc. EPRI International Conference on Boiler Tube and HRSG Tube Failures and Inspections, San Diego (2004)
M. Schütze: Modelling oxide scale fracture; Materials at High Temperatures 22 (2005) 147-154
M. Schütze, M. Malessa, D. Renusch, P.F. Tortorelli, I.G. Wright, R.B. Dooley: Mechanical Properties and Adherence of Oxide Scales; Materials Science Forum 522-523 (2006) 393
M. Schütze: Mechanical Properties of Oxide Scales as a Key Issue for Oxidation Resistance; Current Topics on High Temperature Materials 48 (2007) 301-313
I.G. Wright, M. Schütze, P.F. Tortorelli, R.B. Dooley: Towards improved prediction of scale exfoliation from steam tubes; Materials at High Temperatures 24 (2007) 265-274
M. Schütze, I. Wright, P. Tortorelli: Recent Advances in the quantitative characterisation of mechanical scale failure; J. Chinese Society for Corrosion and Protection 29 (2009) 313
M. Schütze, P.F. Tortorelli, I.G. Wright: Development of a comprehensive oxide scale failure diagram; Oxidation of Metals 73 (2010) 389-418
M. Rudolphi, M. Schütze: Investigations for the Validation of the Defect Based Scale Failure Diagrams - Part I: Nickel Oxide; Oxidation of Metals (2012) DOI 10.1007/s11085-012-9317-3

Ni-Basis-Werkstoffe und Coatings für Gasturbinen

B. Reppich, H. Bügler, R. Leistner, M. Schütze: Application of the Microstructural Concept of Creep and Rupture Life Time to a γ'-Precipitating Ni-Base Alloy I. Yielding and Creep Behaviour; in "Creep and Fracture of Engineering Materials and Structures", Hrsg. B. Wilshire, D. Owen, Pineridge Press, Swansea (1984) 279
M. Göbel, A. Rahmel, M. Schütze: The Isothermal and Cyclic Oxidation Behaviour of Single-Crystal Nickel Base Superalloys in Air Between 800-1150ºC; in "High Temperature Materials for Power Engineering 1990", Hrsg. E. Bachelet et al., Kluwer Academic Publ., Dordrecht (1990) 1225
M. Göbel, A. Rahmel, M. Schütze: High Temperature Oxidation of Single-Crystal Superalloys; Proc. Eurocorr '91, GTE, Budapest (1991) 269
M. Göbel, A. Rahmel, M. Schütze: The Isothermal-Oxidation Behavior of Several Nickel-Base Single-Crystal Superalloys With and Without Coatings; Oxidation of Metals 39 (1993) 231
M. Göbel, A. Rahmel, M. Schütze: The Cyclic-Oxidation Behavior of Several Nickel-Base Single-Crystal Superalloys Without and With Coatings; Oxidation of Metals 41 (1994) 271-300
M. Göbel, A. Rahmel, M. Schütze, M. Schorr, W.T. Wu: Interdiffusion Between the Platinum-Modified Aluminide coating RT22 and Nickel-based Single-Crystal Superalloys at 1000 and 1200ºC; Mater. High Temp. 12 (1994) 301-309
T. Link, A. Rahmel, M. Schütze: The Influence of Gaseous Impurities in Air on the High Temperature Corrosion of Coated and Uncoated Nickel-based Superalloys; Materials at High Temperatures 13 (1995) 55-66
A. Jeutter, M. Schütze: The Influence of HCl-containing Atmospheres on High Temperature Corrosion of Coated and Uncoated Nickel-Base Superalloys under Complex Loading Conditions; Proc. EUROMAT 97, Bd. 1, Netherlands Society for Materials Science, Zwijndrecht/NL (1997) 223-226
M. Schütze, A. Jeutter: High temperature corrosion resistance of gas turbine materials and coatings under the influence of Cl-contaminations; in "Materials for advanced power engineering 1998", Hrsg. J. Lecomte-Beckers et al., Reihe Energietechnik, Bd. 5, Forschungszentrum Jülich (1998) 1543-1552
A. Jeutter, M. Schütze: The Role of HCl Impurities in the Environment and Y for the High Temperature Corrosion of CoNiCrAl(Y)-Coatings on a Ni-base Superalloy under Complex Loading Conditions; Materials at High Temperatures 16 (1999) 71-86
A. Littner, M. Schütze: The cyclic oxidation behaviour of several new aluminide and platinum aluminide diffusion coatings at 1150°C; Proc. Int. Symp. "Corrosion Science in the 21st Century", UMIST, Manchester 2003 (CD), The Journal of Corrosion Science and Engineering, Vol. 6 (2003)
E. Berghof-Hasselbächer, A. Littner, M. Schütze, M. Schorr, P. Gawenda: Charakterisierung von Al- und PtAl-Diffusionsbeschichtungen auf Ni-Basis-Superlegierungen; Sonderbände der Praktischen Metallographie 35 (2004) 325-336
K. Aleksandrov, M. Schütze: Depletion sensor for protective high temperature coatings; Proc. EUROCORR 2009 (CD), Nizza/F (2009)
E. Berghof-Hasselbächer, P.J. Masset, D. Texier, G. Schmidt, P. Gawenda, M. Jusek, M. Schütze: Mikrostrukturen von NiAl_(1-x)Hf_(x)-Legierungen (x=0…0,2); Sonderbände der Praktischen Metallographie 41 (2009) 113-119
I. Teliban, C. Thede, S. Chemnitz, C. Bechtold, W.J. Quadakkers, M. Schütze, E. Quandt: Magnetic moment investigation by frequency mixing techniques; Review of Scientific Instruments 80 (2009) 115106
H.-E. Zschau, P.J. Masset, D. Renusch, M. Schütze: Thermodynamical Considerations for applying the Halogen Effect to Ni-Base Superalloys; Proc. TMS Spring Meeting, San Francisco/USA (2009) 149-156
H.-E. Zschau, D. Renusch, P.J. Masset, M. Schütze: A new concept of oxidation protection of Ni-base alloys by using the halogen effect; Materials at High Temperatures 26 (2009) 85-89
H.-E. Zschau, D. Renusch, P.J. Masset, M. Schütze: The halogen effect for Ni-base alloys - a new method for increasing the oxidation protection at high temperatures; Nuclear Instruments and Methods in Physics Research B 267 (2009) 1662-1665
H. Latreche, G. Bozzolo, P.J. Masset, T. Weber, M. Schütze: Measurements of the coefficient of thermal expansion (CTE) of NiAlMo alloys and comparison with modelling predictions; Materials Science and Engineering: A 527/21-22 (2010) 5837
H.-E. Zschau, P.J. Masset, M. Schütze: Screening of the Fluorination Parameters to Improve the Oxidation Resistance of Ni-Base Superalloys at Elevated Temperatures; ECS Transactions 25 (2010) 21-30
H.-E. Zschau, P.J. Masset, M. Schütze: The Halogen Effect for Ni-Base Superalloys - a Thermodynamic Study; Materials Science Forum 638-642 (2010) 2375-2380
H.-E. Zschau, P.J. Masset, M. Schütze: Thermodynamical Assessment of the Halogen Effect for Ni-based Superalloys; Proc. 1st International Conference on Materials for Energy, Karlsruhe, 4.-8. Juli 2010 A281-283
H.-E. Zschau, M. Schütze: Application of Accelerators in High Temperature Materials Research; Proc. International Topical Meeting on Nuclear Research Applications and Utilization of Accelerators, Wien/A, 4.-8. Mai 2009, IAEA, Wien (2010)
K. Aleksandrov, M. Schütze, I. Teliban, E. Quandt: Protective high temperature coatings with sensor function for residual life-time; Proc. EUROCORR 2011 (CD), Stockholm/SE (2011)
K. Aleksandrov, M. Schütze, I. Teliban, C. Thede, E. Quandt: Depletion sensor for protective high temperature coatings; Materials and Corrosion 62 (2011) 706-712
I. Teliban, C. Thede, S. Chemnitz, C. Bechtold, E. Quandt, T. Hüttel, W. Quadakkers, K. Aleksandrov, M. Schütze: Sensor for monitoring the depletion state of high temperature protective coatings; Proc. EUROCORR 2011 (CD), Stockholm/SE (2011)
H.-E. Zschau, M. Schütze: Oxidation Protection of Titanium Aluminides and Ni-base Superalloys at high Temperatures by the Halogen Effect - Principles and Applications; Materials Science Forum 696 (2011) 366-371
G. Bonnet, M. Mollard, B. Rannou, J. Balmain, F. Pedraza, X. Montero, M. Galetz, M. Schütze: Initial Aluminizing Steps of Pure Nickel from Al Micro-Particles; Defect and Diffusion Forum 323-325 (2012) 381-386
M.C. Galetz, X. Montero, H. Murakami: Novel processing in inert atmosphere and in air to manufacture high-activity slurry aluminide coatings modified by Pt and Pt/Ir; Materials and Corrosion 63 (2012) 921-928
H.-E. Zschau, M. Schütze: Potential of the Halogen Effect for the Formation of a Protective Alumina Scale on Ni-base Superalloys; Proceedings "Superalloys 2012: The 12th International Symposium on Superalloys". Hrsg. E.S. Huron, R.C. Reed, M.C. Hardy, M.J. Mills, R.E. Montero, P.D. Portella, J. Telesman, TMS (The Minerals, Metals and Materials Society), 733-739
H.-E. Zschau, M. Schütze: Surface Modification by Ion Implantation to improve the Oxidation Resistance of Materials for High Temperature Technology; in "Ion Implantation", Hrsg. M.S. Goorsky, InTech, Rijeka (2012) 409-436

Wärmedämmschichten

F. Dettenwanger, H. Echsler, C. Bruns, M. Schütze: Investigation of Damage Mechanisms in Thermal Barrier Coatings by Acoustic Emission; in "Elevated Temperature Coatings: Science and Technology III", Hrsg. J.M. Hampikian, N.B. Dahotre, TMS, Warrendale (1999)
H. Echsler, W. Przybilla, M. Schütze: Investigation of Bondcoat Oxidation and of Mechanical Behaviour of the Bondcoat Oxide for Life Time Prediction of TBC Systems; Proc. Eurocorr 2000 (CD), London
E. Berghof-Hasselbächer, H. Echsler, P. Gawenda, M. Schorr, M. Schütze: Zeit- und temperaturabhängige Entwicklung von physikalischen Defekten in Wärmedämmschichtsystemen; Sonderbände der Praktischen Metallographie 33 (2001) 275-281
R. Herzog, S. Heckmann, R. Steinbrech, D. Sebold, W.J. Quadakkers, F. Schubert, L. Singheiser, H. Echsler, M. Schütze: Contribution to Life Prediction of Thermal Barrier Coatings: A Concept of Accumulated Damage; Proceedings of Materials Week 2001, 1.-4. Oktober 2001, München
D. Renusch, H. Echsler, M. Schütze: New approaches to the understanding of failure and lifetime prediction of thermal barrier coating systems; in "Lifetime modelling of high temperature corrosion processes", Hrsg. M. Schütze, W.J. Quadakkers, J.R. Nicholls, Maney Publ., London (2001) 324-336
H. Echsler, D. Renusch, M. Schütze: Kinetics of the evolution of physical defects in the TGO and its vicinity for life time prediction of TBC systems; in "Advanced Thermal Barrier Coatings and Titanium Aluminides for Gas Turbines", DLR, Bonn (2002) 152-156
V. Gauthier, M. Schütze: Oxidation behaviour of γ-TiAl coated with zirconia thermal barriers; in "Advanced Thermal Barrier Coatings and Titanium Aluminides for Gas Turbines", DLR, Bonn (2002) 215-218
V. Gauthier, F. Dettenwanger, M. Schütze: Oxidation behavior of γ-TiAl coated with zirconia thermal barriers; Intermetallics 10 (2002) 667-674
R. Herzog, P. Majerus, E. Trunova, H. Echsler, R.W. Steinbrech, W.J. Quadakkers, F. Schubert, L. Singheiser, H. Echsler, M. Schütze,M.: Plasma-Sprayed Thermal Barrier Coatings for Gas Turbine Components - Degradation Parameters and Modelling Approach; Proceedings of the 2nd International Symposium on Integral Materials Modelling, September 2002, Aachen, Germany
D. Renusch, H. Echsler, M. Schütze: Life time modeling of APS-TBC by using acoustic emission analysis; in "Advanced Thermal Barrier Coatings and Titanium Aluminides for Gas Turbines", DLR, Bonn (2002) 48-52
E. Berghof-Hasselbächer, H. Echsler, P. Gawenda, M. Schorr, M. Schütze: Time and temperature dependent development of physical defects in thermal barrier coating systems; Praktische Metallographie 40 (2003) 219-231
M. Schütze, D. Renusch, H. Echsler: The influence of oxidation on the life time of thermal barrier coatings; Corrosion 2003, Paper no. 03509, NACE, Houston (2003)
H. Echsler, D. Renusch, M. Schütze: Bond coat oxidation and its significance for life expectancy of thermal barrier coating systems; Materials science and technology 20 (2004) 307-318
H. Echsler, D. Renusch, M. Schütze: Mechanical behaviour of as sprayed and sintered air plasma sprayed partially stabilised zirconia; Materials science and technology 20 (2004) 869-876
D. Renusch, H. Echsler, M. Schütze: Progress in life time modeling of APS-TBC, Part I: residual, thermal and growth stresses including the role of thermal fatigue; Materials at High Temperatures 21 (2004) 65-76
D. Renusch, H. Echsler, M. Schütze: Progress in life time modeling of APS-TBC, Part II: Critical strains, macro-cracking, and thermal fatigue; Materials at High Temperatures 21 (2004) 77-86
D. Renusch, H. Echsler, M. Schütze: The role that interacting failure mechanisms have on the lifetime of APS-TBC under oxidizing conditions; Materials Science Forum 461-464 (2004) 729-736
H.-E. Zschau, M. Dietrich, D. Renusch, M. Schütze, J. Meijer, H.-W. Becker: Detection of Hydrogen in Hidden and Spalled Layers of Turbine Blade Coatings; Nuclear Instruments & Methods in Physics Research B 249 (2006) 381-383
D. Renusch, M. Schütze: Measuring and modeling the TBC damage kinetics by using acoustic emission analysis; Surface & Coatings Technology 202 (2007) 740-744
D. Renusch, M. Schütze: A prototype software tool for life time assessment of thermal barrier coating systems; Materials Science Forum 595-598 (2008) 151-158
D. Renusch, M. Schütze: The role that bond coat depletion of aluminum has on the lifetime of APS-TBC under oxidizing conditions; Materials and Corrosion 59 (2008) 547-555
M. Rudolphi, D. Renusch, H.-E. Zschau, M. Schütze: Hydrogen detection in buried layers of thermal barrier coatings; Materials Science Forum 595-598 (2008) 177-184
M. Rudolphi, D. Renusch, M. Schütze: Verification of moisture-induced delayed failure of thermal barrier coatings; Scripta Materialia 59 (2008) 255-257
M. Rudolphi, D. Renusch, H.-E. Zschau, M. Schütze, J. Meijer: The effect of moisture on the delayed spallation of thermal barrier coatings; Materials at High Temperatures 26 (2009) 325-329
H. Aleksanoglu, M. Rudolphi, D. Renusch, T.S. Mao, A. Scholz, C. Berger, M. Schütze: Untersuchung der Rissausbreitung in Wärmedämmschichtsystemen unter thermomechanischer Beanspruchung; Tagungsband FVV Informationstagung Turbomaschinen, Heft R552 (2010) 131-158
D. Renusch, M. Rudolphi, M. Schütze: Software tools for lifetime assessment of thermal barrier coatings, Part I - Thermal ageing failure and thermal fatigue failure; Journal of Solid Mechanics and Materials Engineering 4 (2010) 143-154
D. Renusch, M. Rudolphi, M. Schütze: Software tools for lifetime assessment of thermal barrier coatings, Part II - Bond coat aluminum depletion failure; Journal of Solid Mechanics and Materials Engineering 4 (2010) 155-166
M. Schütze, M. Rudolphi: Prediction of Mechanical Scale Failure - Current Status and Perspectives; Materials Science Forum 696 (2011) 138-143

Coatings für thermische Kraftwerke

G. Strehl, V. Guttmann, D. Naumenko, A. Kolb-Telieps, G. Borchardt, W.J. Quadakkers, J. Klöwer, P.A. Beaven, J.R. Nicholls: The influence of sample geometry on the oxidation and chemical failure of FeCrAl(RE) alloys; in "Lifetime modelling of high temperature corrosion processes", Hrsg. M. Schütze, W.J. Quadakkers, J.R. Nicholls, Maney Publ., London (2001) 107-122
V. Rohr, A. Donchev, M. Schütze: Diffusion coatings for the high temperature corrosion protection of 9-12% Cr steels; Proc. EUROCORR 2004 Nizza/F (CD) (2004), paper no. 237
V. Rohr, M. Schütze: Diffusion coatings for heat exchanger materials; Surface Engineering 20 (2004) 266-274
V. Rohr, M. Schütze: Novel low temperature diffusion coatings for heat exchanger materials; Materials Science Forum 461-464 (2004) 401-408
E. Huttunen-Saarivirta, S. Kalidakis, F.H. Stott, V. Rohr, M. Schütze: The erosion-corrosion resistance of uncoated and aluminized 12% chromium ferritic steels under fluidized-bed conditions at elevated temperature; Materials and Corrosion 56 (2005) 897-906
J. Kalivodova, D. Baxter, M. Schütze, V. Rohr: Gaseous corrosion of alloys and novel coatings in simulated environments for coal, waste and biomass boilers; Materials and Corrosion 56 (2005) 882-889
A. Littner, F. Pedraza, A.D. Kennedy, P. Moretto, L. Peichl, T. Weber, M. Schütze: Performance and thermal stability of Pt-modified Al-diffusion coatings for superalloys under cyclic and isothermal conditions; Proceedings of the sixth international conference on the Microscopy of Oxidation, Birmingham, 4.-6. April 2005, Hrsg. G.J. Tatlock, H.E. Evans (2005) 245-254
L. Nieto Hierro, V. Rohr, P.J. Ennis, M. Schütze, W.J. Quadakkers: Steam oxidation and its potential effects on creep strength of power station materials; Materials and Corrosion 56 (2005) 890-896
V. Rohr, A. Donchev, M. Schütze, A. Milewska, F.J. Pérez: Diffusion coatings for high temperature corrosion protection of 9-12%Cr steels; Corrosion Engineering, Science and Technology 40 (2005) 226-232
V. Rohr, M. Schütze, E. Fortuna, D.N. Tsipas, A. Milewska, F.J. Perez: Development of novel diffusion coatings for 9-12% Cr ferritic-martensitic steels; Materials and Corrosion 56 (2005) 874-881
V. Rohr, M. Schütze, P. Maugis, D. Poquillon, D. Monceau: Mechanism of the pack cementation process at low temperature on 9% Cr steels; Proc. Eurocorr 2005, Lissabon 2005 (CD)
T. Weber, M. Schütze: Diffusion coatings for corrosion protection of high temperature structural materials; Defect and Diffusion Forum 237-240 (2005) 922-927
E. Berghof-Hasselbächer, V. Rohr, E. Nicolas, M. Schütze: The determination of Al-diffusion layer thickness by image processing; Praktische Metallographie 43 (2006) 127-142
E. Huttunen-Saarivirta, V. Rohr, F.H. Stott, M. Schütze: Influence of glass bead blasting of 9%Cr steel substrate on development of aluminide diffusion coatings; Surface Engineering 22 (2006) 472-480
E. Huttunen-Saarivirta, F.H. Stott, V. Rohr, M. Schütze: Particle angularity effects on the elevated-temperature erosion-oxidation behaviour of aluminium diffusion; Wear 261 (2006) 746-759
L. Niewolak, M. Malessa, S. Y. Coleman, W. J. Quadakkers, M. Schütze: Influence of cycling parameter variation on thermal cyclic oxidation testing of high temperature materials (COTEST); Materials and Corrosion 57 (2006) 31-42
E. Huttunen-Saarivirta, F.H. Stott, V. Rohr, M. Schütze: Erosion-oxidation behavior of chromized-aluminized 9% chromium steel under fluidized-bed conditions at elevated temperature; Oxidation of Metals 68 (2007) 113-132
E. Huttunen-Saarivirta, F.H. Stott, V. Rohr, M. Schütze: Erosion-oxidation behaviour of pack-aluminized 9% chromium steel under fluidized-bed conditions at elevated temperature; Corrosion Science 49 (2007) 2844-2865
E. Huttunen-Saarivirta, S. Kalidakis, F.H. Stott, V. Rohr, M. Schütze: Erosion-Oxidation of Uncoated, Aluminized and Chromized-Aluminized 9Cr-1Mo Steels Under Fluidized-Bed Conditions at 550°C to 700°C; Tribology International 43 (2010) 161-170
X. Montero, M. Galetz, M. Schütze: A single step process to form in-situ an alumina foam/aluminide TBC system for alloys in extreme environments at high temperatures; Surface and Coatings Technology, In Press, Corrected Proof, Available online 20 June 2011

Werkstoffe und Coatings für sulfidierende Atmosphären

B. Glaser, M. Schütze, F. Vollhardt: Auswertung von Daten zum H₂S-Angriff auf Stähle bei verschiedenen Temperaturen und Konzentrationen; Chem. Ing. Techn. 63 (1991) 634
M. Schulte, M. Schütze: Sulfide Scales for the Protection of Steels in H₂S-Containing Atmospheres; in "Corrosion Control for Low-Cost Reliability", NACE, Houston 1993
M. Schulte, M. Schütze: The Behaviour of Protective Sulfide Scales on Various Steels in H₂S-Containing Atmospheres during Temperature Changes; in "Progress in the Understanding and Prevention of Corrosion", Hrsg. J.M. Costa, A.D. Mercer, The Institute of Materials, London (1993) 750
M. Schütze: Einfluß von Temperaturänderungen auf das Verhalten schützender Sulfidschichten; Werkstoffe und Korrosion 47 (1996) 103-105
M. Schütze, M. Nöth: The Sulfidation Resistance of Several Fe- and Ni-Base Alloys and of Two Intermetallics in Atmospheres Containing H₂S at 400-700ºC; Proc. 13th ICC, Australasian Corrosion Association, Melbourne (1996) 1534-1542
K. Rahts, M. Nöth, M. Schulte, M. Schorr, P. Gawenda, M. Schütze: Untersuchungen an Sulfidschichten verschiedener Hochtemperaturwerkstoffe aus thermischer Beanspruchung in H₂S-haltiger Atmosphäre; Sonderbände der Praktischen Metallographie 28 (1997) 229-236
M. Schütze, M. Nöth: Materials for High Temperature Sulfidation Resistant Coatings; Proc. EUROCORR '97, NKF, Oslo (1997) 79-84
M. Schütze, M. Nöth: Protective Coatings for High Temperatures and High Sulfur-Low Oxygen Environments; in "Corrosion 98", NACE Houston (1998) 188/1-14
M. Schulte, A. Rahmel, M. Schütze: The Sulfidation Behavior of Several Commercial Ferritic and Austenitic Steels; Oxidation of Metals 49 (1998) 33-70
J. Jimenez Soler, J.F. Norton, M. Nöth, M. Schütze: The Corrosion Behaviour of a TiAl Coating Exposed to a Simulated Dry-feed Entrained Slagging Coal Gasifier Atmosphere Containing 0.8 % H₂S at 600°C; Materials and Corrosion 50 (1999) 373-446
M. Schulte, M. Schütze: The Role of Scale Stresses in the Sulfidation of Steels; Oxidation of Metals 51 (1999) 55-77
T. Weber, M. Schütze: Development of Protective Coatings for Reducing Environments at High Temperatures; in CORROSION 99, Paper No. 72, NACE, Houston (1999)
T. Weber, M. Schütze: Protective Coatings for Reducing and Sulfidizing Environments; in "Solution of Corrosion Problems in Advanced Technologies", Hrsg. G. Schmitt, M. Schütze, Kapitel 2/6, DECHEMA, Frankfurt am Main (1999)
T. Weber, M. Schütze: Protective Coatings for Reducing Sulfidizing Environments at High Temperatures; Proc. China International Corrosion Control Conference '99 (CICCC'99), Hrsg. Z. Ren et al., China Chemical Anticorrosion Technology Association, Beijing (1999) 359-363
B. Aumüller, T. Weber, M. Schütze: Verfahrenstechnische Aspekte und Schutzwirkung von thermisch gespritzten TiAl-Schutzschichten für reduzierende Atmosphären; in "Schutzschichten für Hochtemperaturanwendungen", FDS, Dresden (2000)
T. Weber, M. Schütze: Coatings against high temperature H₂S-Corrosion; Proc. EUROCORR 2001 (CD) Associazione Italiana di Metallurgia, Milano (2001)
B. Aumüller, T. Weber, M. Schütze: Thermisch gespritzte Korrosionsschutzschichten für sulfidierende Atmosphären; Proc. Int. Thermal Spray Conference 2002, Hrsg. E. Lugscheider, DVS-Verlag, Düsseldorf (2002)
M. Schütze: High temperature corrosion - A materials challenge in modern high temperature technology; Ochrona przed korozja 45 (2002) 87-96
T. Weber, C. Rosado, M. Schütze: Development of Coatings for Environments with high sulfur and/or carbon activities at low oxygen potentials; CORROSION 2002, NACE, Houston (2002) 02371/1-12
M. Schütze, M. Spiegel: Korrosion in Anlagen zur thermischen Abfallverwertung; Proc. Jahrestagung 2004 der GfKORR - Gesellschaft für Korrosionsschutz e.V., Korrosionsschutz in der Chemieindustrie (CD), GfKORR, Frankfurt am Main (2004)
T. Weber, M. Schütze: Kodiffusionsschichten aus Aluminium, Silizium und Titan zur Verbesserung der Hochtemperatur-Korrosionsbeständigkeit von Apparatebauwerkstoffen; in "Neue Materialien und Verfahren in der Beschichtungstechnik", Tagungsband zum 7. Werkstofftechnischen Kolloquium, Hrsg. B. Wielage, Chemnitz (2004) 181-186
M. Schütze, M. Malessa, V. Rohr, T. Weber: Development of Coatings for Protection in Specific High Temperature Environments; Surface & Coatings Technology 201 (2006) 3872-3879
M. Schütze, H.K. Steinberg: Ursachen und Mechanismen der Korrosion in thermischen Anlagen; Verfahren & Werkstoffe für die Energietechnik: Korrosion in Anlagen zur regenerativen Energieerzeugung, Hrsg. M. Faulstich, D. Bendix, Förster Verl., Sulzbach-Rosenberg 2 (2006) 25-50
M. Schütze: Corrosion Resistance at elevated temperatures in highly aggressive environments; CORROSION 63 (2007) 4-18
B. Rammer, T. Weber, M. Schütze: Diffusion coatings for aggressive high-temperature process environments; Proc. EUROCORR 2008 (CD), Edinburgh/UK (2008)

Werkstoffe und Coatings für aufkohlende Bedingungen und Metal Dusting Atmosphären

U.J. Brand, H.-E. Bühler, P. Karduk, S. Köhler, E. Berghof-Hasselbächer, M. Schütze: Investigations of a Valve Damaged by Oxidation and Carburisation; in "Solution of Corrosion Problems in Advanced Technologies", Hrsg. G. Schmitt, M. Schütze, Kapitel 2/27, DECHEMA, Frankfurt am Main (1999)
U.J. Brand, H.-E. Bühler, P. Karduck, S. Köhler, E. Berghof-Hasselbächer, M. Schütze: Schäden durch Oxidation und Aufkohlung an Schiebern in einer Dehydrieranlage; Praktische Metallographie 36 (1999) 405-422
F. Dettenwanger, D. Grotmann, H. Friedrich, E. Berghof-Hasselbächer, M. Schorr, M. Schütze: Damage of a Heat-treatment Retort by Metal Dusting Attack; Materials and Corrosion 50 (1999) 289-293
C. Rosado, F. Dettenwanger, M. Schütze: Development of coatings against metal dusting attack; Proc. Int. Workshop Metal Dusting, 2000, Argonne National Lab., Argonne (2001) 213-224
C. Rosado, F. Dettenwanger, M. Schütze: Protection of steels against metal dusting attack by coatings; Proc. EUROCORR 2001 (CD) Associazione Italiana di Metallurgia, Milano (2001)
M. Schütze, C. Rosado, F. Dettenwanger: Protection of steels against metal dusting attack by coatings; Proc. Stainless Steel World 2001, KCI Publishing, Zutphen/NL (2001) 306-314
E. Berghof-Hasselbächer, H.-E. Bühler, O. Greven, M. Schorr, J. Schürhoff, M. Schütze: Untersuchungen zum Bauteilversagen von Rostsystemen bei der Restholzverbrennung; Praktische Metallographie 39 (2002) 369-386
E. Berghof-Hasselbächer, C. Rosado Sainz-Rosas, M. Schütze: Korrosionsschutzschichten gegen Metal Dusting Angriff; Sonderbände der Praktischen Metallographie 34, Hrsg. G. Petzow, Werkstoff-Informationsgesellschaft, Frankfurt am Main (2002) 271-281
M. Schütze: High temperature corrosion - A materials challenge in modern high temperature technology; Ochrona przed korozja 45 (2002) 87-96
T. Weber, C. Rosado, M. Schütze: Development of Coatings for Environments with high sulfur and/or carbon activities at low oxygen potentials; CORROSION 2002, NACE, Houston (2002) 02371/1-12
E. Berghof-Hasselbächer, C. Rosado Sainz-Rozas, M. Schütze: Korrosionsschutzschichten gegen Metal Dusting Angriff; Praktische Metallographie 40 (2003) 407-419
C. Rosado, M. Schütze: Protective behaviour of newly developed coatings against metal dusting; Materials and Corrosion 54 (2003) 831-854
M. Schütze: Metal Dusting, Carburization and Nitridation; Materials and Corrosion 54 (2003) 735
T. Weber, M. Schütze: Kodiffusionsschichten aus Aluminium, Silizium und Titan zur Verbesserung der Hochtemperatur-Korrosionsbeständigkeit von Apparatebauwerkstoffen; in "Neue Materialien und Verfahren in der Beschichtungstechnik", Tagungsband zum 7. Werkstofftechnischen Kolloquium, Hrsg. B. Wielage, Chemnitz (2004) 181-186
M. Schütze, M. Malessa, V. Rohr, T. Weber: Development of Coatings for Protection in Specific High Temperature Environments; Surface & Coatings Technology 201 (2006) 3872-3879
M. Schütze, H.K. Steinberg: Ursachen und Mechanismen der Korrosion in thermischen Anlagen; Verfahren & Werkstoffe für die Energietechnik: Korrosion in Anlagen zur regenerativen Energieerzeugung, Hrsg. M. Faulstich, D. Bendix, Förster Verl., Sulzbach-Rosenberg 2 (2006) 25-50
D. Röhnert, F. Phillipp, H. Reuther, T. Weber, E. Wessel, M. Schütze: Initial Stages in the Metal-dusting Process on Alloy 800; Oxidation of Metals 68 (2007) 271-293
D. Röhnert, M. Schütze, T. Weber: Performance of several nickel base alloys in metal dusting atmospheres; NACE Corrosion 2007, Paper 074175/1-16
C. Rosado, M. Schütze: Protective behaviour of newly developed coatings against metal dusting; in "Corrosion by carbon and nitrogen: Metal dusting, carburisation and nitridation", Hrsg. H.J. Grabke, M. Schütze, Woodhead Publishing, Cambridge (2007) 103-153
M. Schütze: Corrosion Resistance at elevated temperatures in highly aggressive environments; CORROSION 63 (2007) 4-18
C. Geers, T. Weber, M. Schütze: New approach for the inhibition of carbon deposition on steel surfaces under metal dusting conditions; Proc. EUROCORR 2008 (CD), Edinburgh/UK (2008)
B. Rammer, T. Weber, M. Schütze: Diffusion coatings for aggressive high-temperature process environments; Proc. EUROCORR 2008 (CD), Edinburgh/UK (2008)
C. Geers, M. Schütze: New surface protection system against Metal Dusting; Proc. NACE 2009 (CD), Atlanta/GA/USA (2009)
C. Geers, M. Schütze: Non-oxidizing intermetallic phases as an alternative to oxide forming coatings against coking and metal dusting; Proc. Aachener-Ölwärme-Kolloquium 2009, Shaker-Verlag, Aachen (2009) 204
C. Geers, M. Schütze: Selective inhibition of metals on material surfaces catalyzing the metal dusting process; ECS Transactions 25 (2009) 71-76
C. Geers, M. Schütze: Behavior of nickel-tin coated high temperature materials exposed under metal dusting conditions; Proc. NACE 2011 (CD), Houston/TX/USA (2011)
C. Geers, M. Schütze: Lifetime Extension of Alloys for Metal Dusting Applications; Proc. EUROCORR 2011 (CD), Stockholm/SE (2011)
D.J. Young, J. Zhang, C. Geers, M. Schütze: Recent advances in understanding metal dusting: A review; Materials and Corrosion 62 (2011) 7-28
C. Geers, M. Galetz, M. Schütze: Investigation of the effect of the alloy 600 substrate for the stability of a Ni3Sn2 coating for metal dusting protection at 620°C; Surf. Coat. Tech. 215 (2013) 2-6

Werkstoffe und Coatings für halogenhaltige Atmosphären

M. Schütze, P. Simon: Materials for Use in Atmospheres Containing HF in a Pyrohydrolysis Plant for Re-Processing Spent Pot Lining from Aluminium Production; Werkstoffe und Korrosion 45 (1994) 435-443
M. Schütze, B. Glaser: The Influence of Cl-Containing Atmospheres on Creep Crack Growth at 800ºC; in "Heat-Resistant Materials II", Hrsg. K. Natesan et al., ASM International, Materials Park (Ohio) (1995) 343-351
A. Jeutter, M. Schütze: The Influence of HCl-containing Atmospheres on High Temperature Corrosion of Coated and Uncoated Nickel-Base Superalloys under Complex Loading Conditions; Proc. EUROMAT 97, Bd. 1, Netherlands Society for Materials Science, Zwijndrecht/NL (1997) 223-226
K. Rahts, M. Schorr, C. Schwalm, M. Schütze: Untersuchungen über den Einfluß von Chlor bei der Hochtemperaturoxidation; Praktische Metallographie 29 (1998) 305-311
M. Schütze, A. Jeutter: High temperature corrosion resistance of gas turbine materials and coatings under the influence of Cl-contaminations; in "Materials for advanced power engineering 1998", Hrsg. J. Lecomte-Beckers et al., Reihe Energietechnik, Bd. 5, Forschungszentrum Jülich (1998) 1543-1552
R. Bender, M. Schütze: Corrosion Behaviour of Several Commercial Alloys in Oxidizing-Chloridizing Gas Mixtures at 650 to 1000°C; in "Solution of Corrosion Problems in Advanced Technologies", Hrsg. G. Schmitt, M. Schütze, Kapitel 2/14, DECHEMA, Frankfurt am Main (1999)
A. Jeutter, M. Schütze: The Role of HCl Impurities in the Environment and Y for the High Temperature Corrosion of CoNiCrAl(Y)-Coatings on a Ni-base Superalloy under Complex Loading Conditions; Materials at High Temperatures 16 (1999) 71-86
K. Rahts, M. Schorr, C. Schwalm, M. Schütze: Wasserfreie Präparationsmethode zum Nachweis von Chloriden bei der Hochtemperaturoxidation in chlorhaltigen Atmosphären; Praktische Metallographie 36 (1999) 86-97
R. Bender, M. Schütze: Oxidation Behavior of Several Commercial Alloys in Chlorine-Containing High Temperature Environments; CORROSION 2000, Paper No. 239, NACE, Houston (2000)
C. Schwalm, M. Schütze: The Corrosion Behavior of Several Heat Resistant Materials in Air + 2 Vol-% Cl₂ at 300 to 800°C Part I - Fe-Base and Fe-Containing Alloys; Materials and Corrosion 51 (2000) 34-49
C. Schwalm, M. Schütze: The Corrosion Behavior of Several Heat Resistant Materials in Air + 2 Vol-% Cl₂ at 300 to 800°C Part 2 - Nickel Base Alloys; Materials and Corrosion 51 (2000) 73-79
C. Schwalm, M. Schütze: The Corrosion Behavior of Several Heat Resistant Materials in Air + 2 Vol-% Cl₂ at 300 to 800°C Part 3 - Alumina Formers and Intermetallics; Materials and Corrosion 51 (2000) 161-172
R. Bender, M. Schütze: Corrosion behaviour of several commercial alloys in oxidizing-chloridizing environments at 650-1000°C; Proc. EUROCORR 2001 (CD), Associazione Italiana di Metallurgia, Milano (2001)
M. Schütze, R. Bender: Hochtemperaturkorrosion in chlorhaltigen Atmosphären - Leistungsfähigkeit metallischer Werkstoffe und Möglichkeiten zur Erhöhung der Beständigkeit; in "Hochlegierte Werkstoffe - Korrosionsverhalten und ihre Anwendung", Bd. 3, TAW-Verlag, Wuppertal (2001)
M. Schütze: High temperature corrosion - A materials challenge in modern high temperature technology; Ochrona przed korozja 45 (2002) 87-96
R. Bender, M. Schütze: The role of alloying elements in commercial alloys for corrosion resistance in oxidizing-choridizing atmospheres Part I: Literature evaluation and thermodynamic calculations on phase stabilities; Materials and Corrosion 54 (2003) 567-586
R. Bender, M. Schütze: The role of alloying elements in commercial alloys for corrosion resistance in oxidizing-chloridizing atmospheres - Part 2: Experimental investigations; Materials and Corrosion 54 (2003) 652-686
M. Schütze, M. Spiegel: Korrosion in Anlagen zur thermischen Abfallverwertung; Proc. Jahrestagung 2004 der GfKORR - Gesellschaft für Korrosionsschutz e.V., Korrosionsschutz in der Chemieindustrie (CD), GfKORR, Frankfurt am Main (2004)
T. Weber, R. Bender, M. Schütze: Hochtemperaturkorrosion in chlorhaltiger Verbrennungsatmosphäre - Schutzkonzepte für metallische Werkstoffe; Optimierung der Abfallverbrennung 1, K.J. Thomé-Kozmiensky (Hrsg.), TK-Verlag, Neuruppin (2004) 581-598
M. Schütze, M. Malessa, V. Rohr, T. Weber: Development of Coatings for Protection in Specific High Temperature Environments; Surface & Coatings Technology 201 (2006) 3872-3879
M. Schütze, H.K. Steinberg: Ursachen und Mechanismen der Korrosion in thermischen Anlagen; Verfahren & Werkstoffe für die Energietechnik: Korrosion in Anlagen zur regenerativen Energieerzeugung, Hrsg. M. Faulstich, D. Bendix, Förster Verl., Sulzbach-Rosenberg 2 (2006) 25-50
H. Latreche, G. Tegeder, G. Wolf, P.J. Masset, T. Weber, M. Schütze: High temperature corrosion behaviour of NiAlMo APS-coatings in chlorine-based atmospheres; Proc. EUROCORR 2007 (CD), Freiburg (2007)
M. Schütze: Corrosion Resistance at elevated temperatures in highly aggressive environments; CORROSION 63 (2007) 4-18
H. Latreche, S. Doublet, G. Wolf, G. Tageder, P.J. Masset, T. Weber, M. Schütze: Behaviour of NiAl APS-coatings in chlorine-containing atmospheres; Materials and Corrosion 59 (2008) 573-583; Proc. NACE Corrosion 2008, New Orleans/USA (2008)
H. Latreche, G. Tegeder, G. Wolf, P.J. Masset, T. Weber, M. Schütze: New approaches to improve high temperature corrosion resistance in chlorine-based atmospheres; Materials Science Forum 595-598 (2008) 307-321
B. Rammer, T. Weber, R. Bender, M. Schütze: Material solutions for the thermal treatment in high chlorine environments; Proc. NACE Corrosion 2008, New Orleans/USA (2008)
B. Rammer, T. Weber, M. Schütze: Diffusion coatings for aggressive high-temperature process environments; Proc. EUROCORR 2008 (CD), Edinburgh/UK (2008)
B. Rammer, T. Weber, M. Schütze: Entwicklung von Diffusionsschichten auf Nickelbasiswerkstoffen für den Einsatz in chlorhaltigen Hochtemperaturprozessen; Mat.-wiss. u. Werkstofftech. 39 (2008) 29-32
E. Berghof-Hasselbächer, P.J. Masset, D. Texier, G. Schmidt, P. Gawenda, M. Jusek, M. Schütze: Mikrostrukturen von NiAl_(1-x)Hf_(x)-Legierungen (x=0…0,2); Sonderbände der Praktischen Metallographie 41 (2009) 113-119
H. Latreche, S. Doublet, M. Schütze: Development of Corrosion Assessment Diagrams for High Temperature Chlorine Corrosion. Part I: State of the Art and Development of the Basis for a New Extended Approach; Oxidation of Metals 72 (2009) 1-30
H. Latreche, S. Doublet, M. Schütze: Development of Corrosion Assessment Diagrams for High Temperature Chlorine Corrosion. Part II: Development of "Dynamic" Quasi-stability Diagrams; Oxidation of Metals 72 (2009) 31-65
P.J. Masset, D. Texier, M. Schütze: Coefficients of thermal expansion of (Ni_0.5Al_0.5)_1-xHf_x alloys (x = 0 ... 0.2); Materials Science and Technology 25 (2009) 874-879
B. Rammer, T. Weber, M. Schütze: Diffusion coatings for aggressive high temperature process environments; Corrosion Engineering, Science and Technology 44 (2009) 227-233
B. Rammer, T. Weber, M. Schütze: Diffusion coatings for oxidizing high-chlorine environments at elevated temperatures; Proc. ICMCTF 2009, San Diego/USA (2009)
B. Rammer, M. Schütze: A New Coating Concept for Oxidizing High Chlorine Environments; Proc. NACE Corrosion 2011, Houston/USA (2011)
M.C. Galetz, J.T. Bauer, M. Schütze, M. Noguchi, C. Takatoh, H. Cho: The influence of copper in ash deposits on the corrosion of boiler tube alloys for waste-to-energy plants; Materials and Corrosion (2012) DOI: 10.1002/maco.201206787

Titanaluminide

S. Becker, A. Rahmel, M. Schorr, M. Schütze: Mechanism of Isothermal Oxidation of the Intermetallic TiAl and of TiAl Alloys; Oxidation of Metals 38 (1992) 425-464
S. Becker, M. Schütze, A. Rahmel: Cyclic-Oxidation Behavior of TiAl and of TiAl Alloys; Oxidation of Metals 39 (1993) 93-106
M. Schütze, M. Schmitz: The Oxidation Behaviour of Titanium Aluminide under the Effect of Mechanical Stresses; Trans. Mat. Res. Soc. Jpn. 14A (1994) 219-224
A. Rahmel, W.J. Quadakkers, M. Schütze: Fundamentals of TiAl Oxidation - A Critical Review; Werkstoffe und Korrosion 46 (1995) 271-285
K. Rahts, M. Schorr, M. Schütze, M. Schmitz-Niederau: Darstellung von Oxidschichten und Gefüge von TiAl-Legierungen aus Hochtemperaturversuchen; Praktische Metallographie 27 (1995) 561-565
M. Schütze, M. Schmitz-Niederau: Interaction of Mechanical Loading and Oxidation at 900ºC for TiAl; in "Gamma Titanium Aluminides", Hrsg. Y.-W. Kim, R. Wagner, M. Yamaguchi, TMS Warrendale (1995) 83-92
C. Lang, M. Schütze: TEM Investigations of the Early Stages of TiAl Oxidation; Oxidation of Metals 46 (1996) 255-285
M. Schütze: Intermetallic Titanium Aluminides - Importance of Oxidation Resistance for Applications; Proc. Conf. Corrosion '96 - Theory and Practice, Hrsg. R. Juchniewicz, Politechnika Gdanska, Gdansk (1996) 41-58
M. Hald, M. Schütze: Isothermal Oxidation of P/M-TiAl Alloys; Materials Science Forum 251-254 (1997) 179-186
C. Lang, M. Schütze: Die Mechanismen der Anfangsoxidation und ihre Auswirkungen auf die Oxidationsbeständigkeit von Titanaluminiden; Proc. Werkstoffwoche 96, Hrsg. F. Aldinger, H. Mughrabi (1997) 871-876
C. Lang, M. Schütze: The Initial Stages in the Oxidation of TiAl; Materials and Corrosion 48 (1997) 13-22
M. Schütze, M. Hald: Improvement of the Oxidation Resistance of TiAl Alloys by Using the Chlorine Effect; Materials Science and Engineering A 239-240 (1997) 847-858
M. Schütze, M. Hald, C. Lang. S. Melsheimer, A. Rahmel: Intermetallic disilicides and titanium aluminides - a new class of structural high temperature materials under the aspect of their high temperature oxidation resistance; Pure & Appl. Chem. 69 (1997) 2335-2341
G. Schumacher, F. Dettenwanger, M. Hald, C. Lang, M. Schütze: The microalloying effect in the oxidation of TiAl-alloys; in "Solutions to corrosion problems", Jaarbeurs, Utrecht (1998)
F. Dettenwanger, M. Schütze: Isothermal Oxidation of α₂-Ti₃Al between 800 and 1000°C; in "Solution of Corrosion Problems in Advanced Technologies", Hrsg. G. Schmitt, M. Schütze, Kapitel 2/28, DECHEMA, Frankfurt am Main (1999)
U. Hornauer, E. Richter, E. Wieser, W. Möller, G. Schumacher, C. Lang, M. Schütze: Improvement of the High Temperature Oxidation Resistance of Ti50 Al via Ion-Implantation; Nuclear Instruments and Methods in Physics Research B148 (1999) 858-862
M. Schmitz-Niederau, M. Schütze: The Oxidation Behaviour of Several Ti-Al Alloys at 900°C in Air; Oxidation of Metals 52 (1999) 225-240
M. Schmitz-Niederau, M. Schütze: Cracking and Healing of Oxide Scales on Ti-Al Alloys at 900°C; Oxidation of Metals 52 (1999) 241-276
G. Schumacher, F. Dettenwanger, M. Schütze, U. Hornauer, E. Richter, E. Wieser, W. Möller: Microalloying Effects in the Oxidation of TiAl Materials; Intermetallics 7 (1999) 1113-1120
G. Schumacher, C. Lang, M. Schütze, U. Hornauer, E. Richter, E. Wieser, W. Möller: Improvement of the Oxidation Resistance of γ-Titanium Aluminides by Microalloying with Chlorine using Ion Implantation; Materials and Corrosion 50 (1999) 162-165
A. Zeller, F. Dettenwanger, M. Schütze: Influence of Water Vapor on the Creep Behaviour of TiAl; in "Gamma Titanium Aluminides 1999", Hrsg. Y.-W. Kim et al., TMS, Warrendale (1999) 761-768
A. Zeller, F. Dettenwanger, M. Schütze: Influence of Water Vapour on the Oxidation Behaviour of TiAl at 700 and 750°C; in "Solution of Corrosion Problems in Advanced Technologies", Hrsg. G. Schmitt, M. Schütze, Kapitel 2/31, DECHEMA, Frankfurt am Main (1999)
F. Dettenwanger, M. Schütze: Isothermal Oxidation of α₂-Ti₃Al; Oxidation of Metals 54 (2000) 121-138
U. Hornauer, R. Günzel, H. Reuther, E. Richter, E. Wieser, W. Möller, G. Schumacher, F. Dettenwanger, M. Schütze: Protection of γ-based TiAl Against High Temperature Oxidation Using Ion Implantation of Chlorine; Surface and Coatings Technology 125 (2000) 89-93
U. Hornauer, E. Richter, W. Matz, H. Reuther, A. Mücklich, E. Wieser, W. Möller, G. Schumacher, M. Schütze: Microstructure and oxidation kinetics of intermetallic TiAl after Si- and Mo- ion implantation
Surface and Coatings Technology 128-129 (2000) 418-422
A. Ralison, F. Dettenwanger, M. Schütze: Oxidation in air and hot corrosion behavior of orthorhombic Ti2AlNb alloys; Proc. Eurocorr 2000 (CD), London
A. Ralison, F. Dettenwanger, M. Schütze: Oxidation of Orthorhombic Ti2AlNb Alloys at 800°C in Air; Materials and Corrosion 51 (2000) 317-328
M. Schütze, G. Schumacher, F. Dettenwanger, U. Hornauer, E. Richter, E. Wieser, W. Möller: Einfluß einer oberflächennahen Dotierung auf die Oxidationskinetik von TiAl-Werkstoffen; in "Schutzschichten für Hochtemperaturanwendungen", FDS, Dresden (2000)
G. Schumacher, F. Dettenwanger, M. Schütze: Investigations of the Microalloying Effect of Chlorine in the Oxidation of TiAl Alloys; Materials at High Temperatures 17 (2000) 53-58
G. Schumacher, F. Dettwanger, M. Schütze, A. Iberl, D. Reil: XRD Investigations of the Phosphorus Effect on the Oxidation of TiAl Alloys by High-Resolution Methods; Oxidation of Metals 54 (2000) 317-337
C. Bruns, M. Schütze: Investigation of the Mechanical Properties of Oxide Scales on Nickel and TiAl; Oxidation of Metals 55 (2001) 35-68
A. Donchev, M. Schütze: Improvement of the oxidation resistance of γ-TiAl alloys by ion implantation; in "Advanced Thermal Barrier Coatings and Titanium Aluminides for Gas Turbines", DLR, Bonn (2002) 134-136
V. Gauthier, F. Dettenwanger, M. Schütze: Oxidation behavior of γ-TiAl coated with zirconia thermal barriers; Intermetallics 10 (2002) 667-674
V. Gauthier, M. Schütze: Oxidation behaviour of γ-TiAl coated with zirconia thermal barriers; in "Advanced Thermal Barrier Coatings and Titanium Aluminides for Gas Turbines", DLR, Bonn (2002) 215-218
W. Przybilla, M. Schütze: Growth stresses in the oxide scales on TiAl alloys at 800 and 900°C; Oxidation of Metals 58 (2002) 337-359
M. Schütze, A. Donchev, V. Gauthier, H.-E. Zschau: Improvement of the oxidation resistance of intermetallic TiAl alloys by the halogen effect; Proc. 15 Int. Corr. Congress, Granada (CD) (2002) Paper 782
M. Schütze, G. Schumacher, F. Dettenwanger, U. Hornauer, E. Richter, E. Wieser, W. Möller: The halogen effect in the oxidation of intermetallic titanium aluminides; Corrosion Science 44 (2002) 303-318
A. Zeller, F. Dettenwanger, M. Schütze: Influence of water vapour on the creep and fatigue properties of TiAl; Intermetallics 10 (2002) 33-57
A. Zeller, F. Dettenwanger, M. Schütze: Influence of water vapour on the oxidation behaviour of titanium aluminides; Intermetallics 10 (2002) 59-72
H.-E. Zschau, V. Gauthier, M. Schütze, H. Baumann, K. Bethge: Investigation of the fluorine microalloying effect in the oxidation of TiAl at 900°C in air; in "Advanced Thermal Barrier Coatings and Titanium Aluminides for Gas Turbines", DLR, Bonn (2002) 210-214
A. Donchev, B. Gleeson, M. Schütze: Thermodynamic considerations of the beneficial effect of halogens on the oxidation resistance of TiAl-based alloys; Intermetallics 11 (2003) 387-398
A. Donchev, M. Schütze, E. Richter, U. Hornauer, E. Wieser: Erhöhung der Oxidationsbeständigkeit von TiAl-Legierungen durch Ionenimplantation; Tagungsband 1, KKF-Kolloquium "Problemlösungen für den metallischen Leichtbau", Januar 2003, GfKORR e.V., Frankfurt (2003)
V. Gauthier, F. Dettenwanger, M. Schütze, V. Shemet, W.J. Quadakkers: Oxidation-resistant aluminide coatings on γ-TiAl; Oxidation of Metals 59 (2003) 233-255
U. Hornauer, E. Richter, E. Wieser, W. Möller, A. Donchev, M. Schütze: Plasma immersion ion implantation of TiAl using chlorine containing plasma; Surface and Coatings Technology 173-174 (2003) 1182-1186
A. Ralison, F. Dettenwanger, M. Schütze: Oxidation of orthorhombic Ti2AlNb alloys in the temperature range 550-1000°C in air; Proceedings of the Fifth International Conference on the Microscopy of Oxidation, Limerick, 26-28 August 2002, Hrsg. S.B. Newcomb, G. Tatlock (2003) 361-383
A. Ralison, F. Dettenwanger, M. Schütze: Oxidation of orthorhombic Ti2AlNb alloys in the temperature range 550-1000°C in air; Materials at High Temperatures 20 (2003) 607-629
H.-E. Zschau, V. Gauthier, G. Schumacher, F. Dettenwanger, M. Schütze, H. Bauman: Investigation of the fluorine microalloying effect in the oxidation of TiAl at 900°C in Air; Oxidation of Metals 59 (2003) 183-200
H.-E. Zschau, M. Schütze, H. Baumann, K. Bethge: Formation of an Alumina Scale after Fluorine Application and Oxidation of TiAl at 900°C in Air; Proceedings of the 203rd Meeting of The Electrochemical Society, Pennington (2003)
H.-E. Zschau, M. Schütze, H. Baumann, K. Bethge: Investigation of the fluorine microalloying effect in the oxidation of TiAl at 900°C in Air; Proceedings of the 203rd Meeting of The Electrochemical Society, Pennington (2003)
H.-E. Zschau, M. Schütze, H. Baumann, K. Bethge: Investigation of the mechanism of the fluorine microalloying effect at the oxidation of TiAl using nuclear physics methods; Proceedings of the Michal Smialowski International Symposium on Corrosion and Hydrogen Degradation: Advances in Corrosion Science and Application. 9.-13.9.2003, Zakopane (2003) 187-192
A. Donchev, M. Schütze: Cyclic oxidation behaviour of halogen implanted Ti-46.5Al-4(Cr, Nb, Ta, B); Materials Science Forum 461-464 (2004) 447-454
A. Donchev, M. Schütze: Gib Sauerstoff bei Leichtmetallen keine Chance; in "Trendbarometer Technik", H.-J. Bullinger (Hrsg.), Hanser Verlag. Berlin (2004) 148-149
A. Donchev, M. Schütze: Hochtemperatur Oxidationsschutz für intermetallische Titanaluminidleichtbaulegierungen durch Nutzung des Halogeneffekts; Proc. Oberflächentage 2004, Deutsche Gesellschaft für Galvano- und Oberflächentechnik e.V. (DGO, Düsseldorf (2004) 93-99
A. Donchev, M. Schütze: Oxidationsschutz durch Halogene; Metalloberfläche 58 (2004) 32-34
A. Donchev, H.-E. Zschau, M. Schütze: The astounding effect of halogens improving the oxidation resistance of titanium aluminide light weight materials; in "Trends in Electrochemistry and Corrosion at the Beginning of the 21st Century", Hrsg. E. Brilas, P.-L. Cabot, Publ. Universitat de Barcelona (2004) 1097-1123
H.-E. Zschau, M. Schütze, H. Baumann, K. Bethge: The Quantitative Role of Surface Doped Fluorine for the Improvement of Oxidation Resistance of TiAl in Air; Materials Science Forum 461-464 (2004) 505-512
A. Donchev, H.-E. Zschau, M. Schütze: The halogen effect for improving the oxidation resistance of TiAl-alloys; Materials at High Temperatures 22 (2005) 309-314
M. Schütze: Recent advances in the understanding of the halogen effect in the oxidation of intermetallic titanium aluminides; in "High temperature corrosion and materials chemistry V: Proceedings of the International Symposium of the Electrochemical Society", Hrsg. E. Opila, J.W. Fergus, T. Maruyama, J. Mizusaki (2005) 1-15
H.-E. Zschau, M. Schütze: Ein kostensparendes Verfahren zur Verbesserung der Oxidationsbeständigkeit von Gamma-TiAl-Legierungen bei Temperaturen von 800°C bis 1000°C; Metalloberfläche 59 (2005) 1-25
H.-E. Zschau, M. Schütze: Oxidationsschutz durch Fluor - Verbesserung der Oxidationsbeständigkeit von Gamma-TiAl-Legierungen bei Temperaturen von 800 bis 1.000 Grad Celsius; Metalloberfläche 59 (2005) 31-34
H.-E. Zschau, M. Schütze, H. Baumann, K. Bethge: Application of ion beam analysis for the control of the improvement of the oxidation resistance of TiAl at 900 °C in air by fluorine ion implantation an HF-treatment; Nuclear Instruments and Methods in Physics Research B 240 (2005) 137-141
A. Donchev, E. Richter, M. Schütze, R. Yankov: Improvement of the Oxidation Behaviour of TiAl-alloys by Treatment with Halogens; Intermetallics 14 (2006) 1168-1174
A. Donchev, M. Schütze: Oxidationsschutz durch Fluorbehandlung; Metalloberfläche 60/12 (2006) 26-28
A. Donchev, M. Schütze, J. Heller, M. Scheydecker: Oxidationsschutz für Titanaluminidbauteile durch Oberflächenbehandlung mit Fluor; Oberflächentage 2006, Proceedings (CD), ZWO, Bonn (2006)
P.J. Masset, A. Donchev, H.-E. Zschau, M. Schütze: Recent developments in the high temperature oxidation protection of TiAl-alloys by using the fluorine effect; Proc. EuroCorr 2006 Part 2 (2006) 587-598
P.J. Masset, H.-E. Zschau, M. Schütze: TiAl oxidation protection improvements using the halogen effect; Proc. 8th Liege Conference. Materials for Advanced Power Engineering, Hrsg. J. Lecomte-Beckers, M. Carton, F. Schubert, P.J. Ennis, Schriften des Forschungszentrums Jülich 53 (2006) 783-792
H.-E. Zschau, M. Schütze, H. Baumann, K. Bethge: The time behaviour of surface applied fluorine inducing the formation of an alumina scale on gamma-TiAl during oxidation at 900°C in air; Intermetallics (2006) 1136-1142
P.J. Masset, H.-E. Zschau, M. Schütze: Comparative fluorine surface treatments for TiAl oxidation protection; Ti-2007 Science and Technology, Journal of the Japan Institute of Metals (2007) 1699-1702
S. Neve, H.-E. Zschau, P.J. Masset, M. Schütze, R. Dörner: Kurzzeitoxidation Fluor-implantierter TiAl-Legierungen; Jahresbericht 2007, Institut für Kernphysik, Universität Frankfurt am Main
R.A. Yankov, A. Kolitsch, A. Rogozin, M. Steinert, A. Donchev, M. Schütze: Oxidation-resistant γ-TiAl alloys produced by ion implantation of fluorine; Proc. E-MRS Spring Symposium, Strasbourg/F (2007)
R.A. Yankov, A. Kolitsch, M. Steinert, A. Donchev, M. Schütze: Oxidation-resistant TiAl alloys produced by plasma immersion ion implantation of fluorine; Proc. 9th Int. Workshop on Plasma Based Ion Implantation & Deposition, Leipzig (2007)
R.A. Yankov, N. Shevchenko, A. Rogozin, M.F. Maitz, E. Richter, W. Möller, A. Donchev, M. Schütze: Reactive plasma immersion ion implantation for surface passivation; Surface & Coatings Technology 201 (2007) 6752-6758
H.-E. Zschau, M. Schütze: Formation of a protective Alumina Layer by Fluorine Doping of Titanium Aluminide Surfaces; Ti-2007 Science and Technology, Journal of the Japan Institute of Metals (2007) 1695-1698
H.-E. Zschau, M. Schütze, H. Baumann, K. Bethge: Surface modification of titanium aluminides with fluorine to improve their application for high temperature service conditions; Nuclear Instruments and Methods in Physics Research B 257(2007) 383-387
E. Berghof-Hasselbächer, S. Diliberto, P. Gawenda, P.J. Masset, G. Schmidt, M. Schütze: Metallographische Untersuchungen der Mikrostrukturen von technischen TiAl-Legierungen; Sonderbände der Praktischen Metallographie 40 (2008) 117-124
A. Donchev, A. Kolitsch, W. Möller, M. Schütze, R. Yankov: The fluorine effect for high temperature oxidation protection of TiAl-alloys for automotive and aero-engine applications; in "Structural Aluminides for Elevated Temperatures", Hrsg. Y.-W. Kim, D. Morris, R. Yang, C. Leyens, TMS Warrendale/USA (2008) 323
A. Donchev, E. Richter, M. Schütze, R. Yankov: Improving the Oxidation Resistance of TiAl-Alloys with Fluorine; Journal of Alloys and Compounds 452 (2008) 7
A. Donchev, M. Schütze: Improving the Oxidation Resistance of γ-Titanium Aluminides by Halogen Treatment; Materials and Corrosion 59 (2008) 489-493
A. Donchev, M. Schütze: The use of fluorine for the protection of TiAl-components against high-temperature oxidation; VDI-Berichte 2008, 1st EUCOMAS, VDI Verlag Düsseldorf (2008) 393
P.J. Masset, S. Neve, H.-E. Zschau, R. Dörner, M. Schütze: Influence of alloy compositions on the halogen effect in TiAl alloys; Materials and Corrosion 59 (2008) 609-618
P.J. Masset, M. Schütze: Improvement of the oxidation resistance of TiAl alloys using controlled gaseous fluorination; ECS Trans. 11 (2008) 37
P.J. Masset, M. Schütze: Thermodynamic assessment of the alloy concentration limits for the halogen effect of TiAl alloys; Advanced Engineering Materials 10 (2008) 666-674
H.-E. Zschau S. Neve, P.J. Masset, M. Schütze, H. Baumann, K. Bethge: Characterization of the long time oxidation protection of fluorine implanted technical TiAl-alloys using ion beam methods; Nuclear Instruments and Methods in Physics Research B 266 (2008) 2441-2445
H.-E. Zschau, M. Schütze: Modelling of the long time stability of the fluorine effect in TiAl oxidation; Materials and Corrosion 59 (2008) 619-623
H.-E. Zschau, M. Schütze: Multiple F-Implantation for Improved Oxidation Protection of Gamma-TiAl Alloy; Proceedings of the TMS Conference "Structural Aluminides for Elevated Temperature Applications", New Orleans/USA (2008)
A. Donchev, R. Braun, M. Schütze: Fluorine treatment for improved adherence of EB-PVD thermal barrier coatings on TiAl alloys; in TMS 2009 Supplemental Proceedings Vol. 1: Materials Processing and Properties, The Metals and Minerals Society (TMS) Warrendale/USA (2009) 211
A. Donchev, P.J. Masset, M. Schütze: Surface treatment of TiAl with fluorine for improved performance at elevated temperatures; Mater. Res. Soc. Symp. Proc. 1128 (2009) 159
A. Donchev, R. Pflumm, M. Schütze: Application of the fluorine effect to TiAl-components; Materials Research Society Symposium Proceedings 1128 (2009) 209
A. Donchev, M. Schütze, R. Yankov, A. Kolitsch: Plasma-Immersion-Ion-Implantation of Fluorine to Protect TiAl-Components against High Temperature Oxidation; Plasma Processes and Polymers 6/6-7 (2009) 434
P.J. Masset, M. Laurent, M. Schütze: Characterisation of the oxide/metal interface of fluorine treated titanium aluminides; Defect and Diffusion Forum 289-292 (2009) 397-404
E. Wild, W. Reimers, R. Pflumm, M. Schütze: Space-resolved 2D X-ray phase analysis on structured TNB-V5 after oxidation for 24hr at 900°C; Jahresbericht HASYLAB 2008 (2009)
R.A. Yankov, A. Kolitsch, J. Borany, F. Munnik, A. Donchev, M. Schütze: Surface modification of Ti and low Al-content Ti-alloys for enhanced environmental stability at elevated temperatures; E-MRS Spring Meeting 2009, Proceedings (CD)
E. Berghof-Hasselbächer, P. Gawenda, P.J. Masset, G. Schmidt, M. Schütze, S. Diliberto: Metallographische Untersuchungen der Mikrostrukturen von technischen TiAl-Legierungen; Praktische Metallographie 47 (2010) 65-83
A. Donchev, R. Braun, M. Schütze: Optimizing thermally grown oxide for thermal barrier coatings on TiAl components via fluorine treatment; JOM 62/1 (2010) 70
A. Donchev, M. Schütze: Comparison of different fluorine treatments for the protection of TiAl-alloys against high temperature oxidation; Materials Science Forum 638-642 (2010) 1294
A. Donchev, M. Schütze: Fluorine treatment of TiAl-components for enhancing high-temperature oxidation resistance; EUCOMAS 2010 Proceedings (CD)
A. Donchev, M. Schütze, A. Kolitsch, R. Yankov: Enhanced resistance of Ti-alloys against environmental attack by a combined Al- and F-treatment; TMS 2010 Supplemental Proceedings Vol. 3: Generals Paper Selections, The Metals and Minerals Society (TMS) Warrendale (2010) 119
A. Donchev, M. Schütze, A. Kolitsch, R. Yankov: Improved environmental resistance of Ti-alloys at elevated temperatures by a combined Al- and F-Treatment; Materials Science & Technology MS&T 2010 Proceedings (CD)
A. Donchev, M. Schütze, A. Kolitsch, R. Yankov: Investigation of the F-effect for oxidation protection of 1st, 2nd and 3rd generation TiAl-alloys; MS&T 2010: Proceedings of Materials Science and technology (2010) 2140-2148
A. Donchev, M. Schütze, A. Kolitsch, R. Yankov: Protection of TiAl-components against high temperature oxidation with fluorine; Materials Science & Technology MS&T 2010 Proceedings (CD)
P.J. Masset, R. Yankov, A. Kolitsch, M. Schütze: Comparison of fluorination treatments to improve the high temperature oxidation resistance of TiAl alloys in SO₂ containing environments; Materials Science Forum 638-642 (2010) 1374-1378
P.J. Masset, M. Schütze: Oxidation tests with untreated and F-treated TNBV5 alloys; ECS Transactions 25 (2010) 45-56
S. Neve, P.J. Masset, R.A. Yankov, A. Kolitsch, H.-E. Zschau, M. Schütze: High temperature oxidation resistance of fluorine-treated TiAl alloys: Chemical vs. ion beam fluorination techniques; Nuclear Instruments and Methods in Physics Research B 268/21 (2010) 3381-3385
S. Neve, P.J. Masset, H.-E. Zschau, M. Schütze: Effect of Heating Rate on the Fluorine Content in TiAl-alloy After Oxidation at 900°C; ECS Transactions 25 (2010) 79-86
S. Neve, K. Stiebing, L.P.H. Schmidt, H.-E. Zschau, P.J. Masset, M. Schütze: Non-destructive fluorine depth profiling as quality assurance for the oxidation protection of TiAl turbine blades; Materials Science Forum 638-642 (2010) 1384-1389
A. Donchev, A. Kolitsch, M. Schütze, R. Yankov: Combined Al- plus F-treatment of Ti-alloys for improved behaviour at elevated temperatures; Materials and Corrosion 62 (2011) 695-698
S. Neve, P.J. Masset, H.-E. Zschau, M. Schütze: Measurements of fluorine depth-profiles on TiAl turbine blades using ion beam analytical techniques; Materials and Corrosion 62 (2011) 713-716
R. Pflumm, M. Schütze: Shark-skin inspired surface engineering on intermetallic titanium aluminides for high temperature applications using the fluorine effect; Materials Research Society Symposium Proceedings 1295 (2011) mrsf10-1295-n04-12
H.-E. Zschau, M. Schütze: Oxidation Protection of Titanium Aluminides and Ni-base Superalloys at high Temperatures by the Halogen Effect - Principles and Applications; Materials Science Forum 696 (2011) 366-371
A. Donchev, M. Schütze, A. Kolitsch, R. Yankov: Optimization of the fluorine effect for improving the oxidation resistance of TiAl-alloys; Materials Science Forum 706-709 (2012) 1061-1065
A. Donchev, M. Schütze, A. Kolitsch, R. Yankov: Suppressing the alpha-casing of Ti-alloys by a combined Al- and F-treatment; Ti-2011 Proceedings, Hrsg. L. Zhou, H. Chang, Y. Li, D. Xu, Science Press Beijing/China (2012) 1864-1867
A. Donchev, M. Schütze, R. Yankov, A. Kolitsch: Efficient oxidation protection of Ti- and TiAl-alloys by fluorine treatments; TMS 2012 Supplemental Proceedings Vol. 2: Materials Properties, Characterization and Modelling, Wiley, Hoboken/USA (2012) 935-940

B. Pelic, D. Rafaja, Patrick J. Masset, H.J. Seifert, L. Bortolotto, M. Schütze, G. Wolf, I. Loeh: Corrosion Behaviour of Ti-48Al-2Nb-2Cr Alloys; Defect and Diffusion Forum 323-325 (2012) 301-307

S. Friedle, N. Nießen, R. Braun, M. Schütze: Thermal barrier coatings on γ-TiAl protected by the halogen effect; Surface and Coatings Technology 212 (2012) 72-78
R.A. Yankov, A. Kolitsch, J. von Borany, A. Mücklich, F. Munnik, A. Donchev, M. Schütze: Surface protection of titanium and titanium aluminium alloys against environmental degradation at elevated temperatures; Surface and Coatings Technology 206 (2012) 3595-3600

Silizide und Si-basierte Keramik

S. Becker, A. Rahmel, M. Schütze: Oxidation of TiSi₂ and MoSi₂; Solid State Ionics 53-56 (1992) 280-289
S. Melsheimer, A. Rahmel, M. Schütze: Mechanismus der Hochtemperaturoxidation von Molybdän- und Titandisilizid; in "Refractory Metals and Hard Materials - Key to Advanced Technologies", Hrsg. H. Bildstein, R. Eck, Bd. 1, Plansee Metall AG, Reutte (1993) 939
K. Bundschuh, S. Melsheimer, M. Schütze: Hochtemperaturoxidation von MoSi₂ als Beschichtungswerkstoff auf SiC-Keramik; Fortschrittsber. DKG 10 (1995) 182-194
K. Bundschuh, M. Schütze: The Characterisation of the Environmental Resistance of Advanced Materials above 1500ºC; Proc. esa/estec 3rd European Workshop on High Temperature Materials, esa - European Space Agency, Paris (1996) 145-150
K. Bundschuh, M. Schütze, C. Müller, P. Greil, W. Heider: Selection of Materials for Use at Temperatures above 1500°C in Oxidizing Atmospheres; Key Engineering Materials 132-136 (1997) 1564-1567
S. Melsheimer, M. Fietzek, V. Kolarik, A. Rahmel, M. Schütze: Oxidation of the Intermetallics MoSi₂ and TiSi₂- A Comparison; Oxidation of Metals 47 (1997) 139-203
S. Melsheimer, A. Rahmel, M. Schütze: Changes in the Transport Properties of Silicon Dioxide Due to Doping of Foreign Ions; Oxidation of Metals 47 (1997) 205-213
M. Schütze, M. Hald, C. Lang. S. Melsheimer, A. Rahmel: Intermetallic disilicides and titanium aluminides - a new class of structural high temperature materials under the aspect of their high temperature oxidation resistance; Pure & Appl. Chem. 69 (1997) 2335-2341
K. Bundschuh, M. Schütze, C. Müller, P. Greil, W. Heider: Selection of Materials for Use at Temperatures Above 1500°C in Oxidizing Atmospheres; Journal of the European Ceramic Society 18 (1998) 2389-2391
S. Lohfeld, F. Dettenwanger, M. Schütze, R. Rix, V. Güther, R. Scholl: Influence of Second Phase Particles on the Oxidation Behaviour of MoSi₂ at 1600°C in Air; in "Solution of Corrosion Problems in Advanced Technologies", Hrsg. G. Schmitt, M. Schütze, Kapitel 2/29, DECHEMA, Frankfurt am Main 1999
S. Lohfeld, F. Dettenwanger, M. Schütze, K. Bundschuh, R. Rix, V. Güther, R. Scholl: Investigation of the Oxidation Behaviour of Selected MoSi₂ Based Composites at High Temperatures; Proc. Eurocorr 2000 (CD), London
K. Bundschuh, M. Schütze: Materials for Temperatures above 1500°C in Oxidizing Atmospheres Part I: Basic Considerations on Materials Selection; Materials and Corrosion 52 (2001) 204-212
K. Bundschuh, M. Schütze: Materials for Temperatures above 1500°C in Oxidizing Atmospheres Part II: Experimental Results on the Oxidation of MoSi₂ Composites and Coated RSiC; Materials and Corrosion 52 (2001) 268-282
K. Bundschuh, M. Schütze: Materials for Temperatures above 1500°C in Oxidizing Atmospheres Part III: Contact Reaction Tests; Materials and Corrosion 52 (2001) 351-361
S. Lohfeld, M. Schütze: Oxidation behaviour of particle reinforced MoSi₂ composites at temperatures up to 1700°C - Part I: Literature review; Materials and Corrosion 56 (2005) 93-97
S. Lohfeld, M. Schütze, A. Böhm, V. Güther, R. Rix, R. Scholl: Oxidation behaviour of particle reinforced MoSi₂ composites at up to 1700 deg C - Part II: Initial screening of the oxidation behaviour of MoSi₂ composites; Materials and Corrosion 56 (2005) 149-158
S. Lohfeld, M. Schütze, A. Böhm, V. Güther, R. Rix, R. Scholl: Oxidation behaviour of particle reinforced MoSi₂ composites at temperatures up to 1700°C - Part III: Oxidation behaviour of optimised MoSi₂ composites; Materials and Corrosion 56 (2005) 250-258

Werkstoffe in wasserdampfhaltigen Atmosphären

W. Christl, A. Rahmel, M. Schütze: Behavior of Oxide Scales on 2.25Cr-1Mo Steel During Thermal Cycling. II. Scales Grown in Water Vapor; Oxidation of Metals 31 (1989) 35
A. Zeller, F. Dettenwanger, M. Schütze: Influence of Water Vapor on the Creep Behaviour of TiAl; in "Gamma Titanium Aluminides 1999", Hrsg. Y.-W. Kim et al., TMS, Warrendale (1999) 761-768
A. Zeller, F. Dettenwanger, M. Schütze: Influence of Water Vapour on the Oxidation Behaviour of TiAl at 700 and 750°C; in "Solution of Corrosion Problems in Advanced Technologies", Hrsg. G. Schmitt, M. Schütze, Kapitel 2/31, DECHEMA, Frankfurt am Main (1999)
F. Dettenwanger, M. Schorr, J. Ellrich, T. Weber, M. Schütze: The Influence of Si, W and Water Vapour on the Oxidation Behaviour of 9Cr Steels; CORROSION 2001, NACE, Houston (2001) 01151/1-8
F. Dettenwanger, M. Schorr, J. Ellrich, T. Weber, M. Schütze: The influence of water vapour and silicon on the long term oxidation behaviour of 9Cr Steels; in "Lifetime modelling of high temperature corrosion processes", Hrsg. M. Schütze, W.J. Quadakkers, J.R. Nicholls, Maney Publ., London (2001) 206-219
A. Zeller, F. Dettenwanger, M. Schütze: Influence of water vapour on the creep and fatigue properties of TiAl; Intermetallics 10 (2002) 33-57
A. Zeller, F. Dettenwanger, M. Schütze: Influence of water vapour on the oxidation behaviour of titanium aluminides; Intermetallics 10 (2002) 59-72
M. Schütze, D. Renusch, M. Schorr: Parameters determining the breakaway oxidation behaviour of ferritic-martensitic 9% Cr steels in environments containing H₂O; Corrosion engineering, science and technology 39 (2004) 157-166
M. Schütze, M. Schorr, D. Renusch, A. Donchev, J. Vossen: The role of alloy composition, environment and stresses for the oxidation resistance of modern 9% Cr steels for fossil power stations; Materials Research 7 (2004) 111-123
A. Donchev, H. Fietzek, V. Kolarik, D. Renusch, M. Schütze: The effect of water vapor in increasing growth stresses in the oxide scale on martensitic steam plant alloys; Materials at High Temperatures 22 (2005) 139-146
M. Schütze, D. Renusch, M. Schorr: Chemical-mechanical failure of oxide scales on 9% Cr steels in air with H₂O; Materials at High Temperatures 22 (2005) 113-120
D. Renusch, M. Schütze: Experience with the use of the acoustic emission technique for monitoring scalefailure in wet and dry environments; Materials at High Temperatures 22 (2005) 35-45
K. Yanagihara, D. Renusch, M. Röhrig, M. Schütze: Effect of Cr Content and Water Vapor on Fracture Behavior of the Scales Formed on Fe and Fe-Cr Alloy; Materials Science Forum 522-523 (2006) 497
I.G. Wright, M. Schütze, P.F. Tortorelli, R.B. Dooley: Towards improved prediction of scale exfoliation from steam tubes; Materials at High Temperatures 24 (2007) 265-274
B. Iwanschitz, J. Sfeir, A. Mai, M. Schütze: Degradation of SOFC Anodes upon Redox Cycling: A Comparison Between Ni/YSZ and Ni/CGO; Journal of The Electrochemical Society 157 (2010) B269-B278
D. Schmidt, M. Schütze: Improved Corrosion Resistance of Superheater Materials in H2O Containing Environments using Mn-Diffusion Coatings; Materials Science Forum 696 (2011) 330-335
A. Naji, M. Schütze: Development of Diffusion Coatings to Optimise the High Temperature Corrosion Resistance of Fuel Cell Reformer Materials; Defect and Diffusion Forum Vols. 323-325 (2012) 245-251

D. Schmidt, M. Galetz, M. Schütze: Deposition of Manganese and Cobalt on Ferritic-Martensitic Steels via Pack Cementation Process; Oxidation of Metals (2012) DOI 10.1007/s11085-012-9340-4

D. Schmidt, M. Galetz, M. Schütze: Improved oxidation resistance of ferritic-martensitic steels in water vapour containing environments via diffusion coatings; Materials at High Temperatures 29 (2012) 159-165
D. Schmidt, M. Galetz, M. Schütze: Improvement of the Oxidation Behavior of Ferritic-Martensitic Steels in Water Vapor Containing Environments; Proc. NACE 2012 (CD), Salt Lake City/ USA (2012)

Warmfeste Stähle

J. Barbehön, A. Rahmel, M. Schütze: Behavior of the Scale on a 9.5Cr Steel under Cyclical Deformation of the Base Metal; Oxidation of Metals 30 (1988) 85
W. Christl, A. Rahmel, M. Schütze: Behavior of Oxide Scales on 2.25Cr-1Mo Steel During Thermal Cycling. I. Scales Formed in Oxygen and Air; Oxidation of Metals 31 (1989) 1
W. Christl, A. Rahmel, M. Schütze: Behavior of Oxide Scales on 2.25Cr-1Mo Steel During Thermal Cycling. II. Scales Grown in Water Vapor; Oxidation of Metals 31 (1989) 35
B. Glaser, M. Schütze, F. Vollhardt: Auswertung von Daten zum H₂S-Angriff auf Stähle bei verschiedenen Temperaturen und Konzentrationen; Chem. Ing. Techn. 63 (1991) 634
M. Schulte, M. Schütze: The Behaviour of Protective Sulfide Scales on Various Steels in H₂S-Containing Atmospheres during Temperature Changes; in "Progress in the Understanding and Prevention of Corrosion", Hrsg. J.M. Costa, A.D. Mercer, The Institute of Materials, London (1993) 750
M. Walter, M. Schütze, A. Rahmel: Behavior of Oxide Scales on 12Cr-1Mo Steel During Thermal Cycling; Oxidation of Metals 39 (1993) 389-410
M. Schütze, M. Nöth: The Sulfidation Resistance of Several Fe- and Ni-Base Alloys and of Two Intermetallics in Atmospheres Containing H₂S at 400-700ºC; Proc. 13th ICC, Australasian Corrosion Association, Melbourne (1996) 1534-1542
J.P.T. Vossen, M. Schütze: Isothermal and Thermocyclic Oxidation Behaviour of Heat-resistant Chromium Containing Steels in Air at 650ºC; Proc. EUROCORR '96, Bd. III, Paper OR 11 Centre Français de l'Anticorrosion/Société de Chimie Industrielle, Paris 1996
J.P.T. Vossen, M. Schütze: Limits for the Recovery of Chromium Oxide Scales on Heat-resistant Stainless Steels in Air With and Without Superimposed Mechanical Load at 650°C; Proc. Int. Conf. Corrosion-Deformation Interactions (CDI), Bd. IV, Paper P 40 Centre Français de l'Anticorrosion/Société de Chimie Industrielle, Paris 1996
J.P.T. Vossen, P. Gawenda, K. Rahts, M. Röhrig, M. Schorr, M. Schütze: Limits of the Oxidation Resistance of Several Heat-resistant Steels under Isothermal and Cyclic Oxidation as well as under Creep in Air at 650°C; Materials at High Temperatures 14 (1997) 387-401
M. Schulte, A. Rahmel, M. Schütze: The Sulfidation Behavior of Several Commercial Ferritic and Austenitic Steels; Oxidation of Metals 49 (1998) 33-70
M. Schulte, M. Schütze: The Role of Scale Stresses in the Sulfidation of Steels; Oxidation of Metals 51 (1999) 55-77
F. Dettenwanger, M. Schorr, J. Ellrich, T. Weber, M. Schütze: The Influence of Si, W and Water Vapour on the Oxidation Behaviour of 9Cr Steels; CORROSION 2001, NACE, Houston (2001) 01151/1-8
F. Dettenwanger, M. Schorr, J. Ellrich, T. Weber, M. Schütze: The influence of water vapour and silicon on the long term oxidation behaviour of 9Cr Steels; in "Lifetime modelling of high temperature corrosion processes", Hrsg. M. Schütze, W.J. Quadakkers, J.R. Nicholls, Maney Publ., London (2001) 206-219
M. Schütze, D. Renusch, M. Schorr: Parameters determining the breakaway oxidation behaviour of ferritic-martensitic 9% Cr steels in environments containing H₂O; Corrosion engineering, science and technology 39 (2004) 157-166
M. Schütze, M. Schorr, D. Renusch, A. Donchev, J. Vossen: The role of alloy composition, environment and stresses for the oxidation resistance of modern 9% Cr steels for fossil power stations; Materials Research 7 (2004) 111-123
G. Wright, M. Schütze, S.R. Paterson, P.F. Tortorelli, R.B. Dooley: Progress in prediction and control of scale exfoliation on superheater and reheater alloys; Proc. EPRI International Conference on Boiler Tube and HRSG Tube Failures and Inspections, San Diego (2004)
A. Donchev, H. Fietzek, V. Kolarik, D. Renusch, M. Schütze: The effect of water vapor in increasing growth stresses in the oxide scale on martensitic steam plant alloys; Materials at High Temperatures 22 (2005) 139-146
M. Schütze, D. Renusch, M. Schorr: Chemical-mechanical failure of oxide scales on 9% Cr steels in air with H₂O; Materials at High Temperatures 22 (2005) 113-120
M. Schütze, E. Berghof-Hasselbächer, J.J. Hoffman: Development of an atlas of microstructures for the latest heat-resistant cast alloys; NACE Corrosion 2007, Paper 07425/1-11
E. Berghof-Hasselbächer, P. Gawenda, M. Schorr, M. Schütze, J.J. Hoffman: Atlas of Microstructures; Materials Technology Institute, St. Louis (2008)
E. Berghof-Hasselbächer, M. Schorr, P. Gawenda, M. Schütze, J.J. Hoffman: Entwicklung eines Mikrostrukturatlanten für die neuesten hitzebeständigen Schleudergusswerkstoffe; Praktische Metallographie 45 (2008) 441-454
J. Kalivodová, D. Baxter, M. Schütze: Corrosion behaviour of boiler steels, coatings and welds in flue gas environments; Materials and Corrosion 59 (2008) 367-373
G. Kunschert, H.-P. Martinz, M. Schütze: Investigation of Oxide-Nucleation on ferritic FeCr Interconnect Alloys for Solid Oxide Fuel Cells exposed to Anode and Cathode Gases at 850°C; Materials Science Forum 559-598 (2008) 779-787
V. Vokál, V. Rohr, M.J. Pomeroy, M. Schütze: Corrosion of alloys and their diffusion aluminide coatings by KCl:K2SO₄ deposits at 650°C in air; Materials and Corrosion 59 (2008) 374-379

Untersuchungsmethoden

K.-H. Döhle, A. Rahmel, M. Schmidt, M. Schütze: Two Different Test Rigs for Creep Experiments in Aggressive Environments; in "Corrosion and Mechanical Stress at High Temperatures", Hrsg. V. Guttmann, M. Merz, Applied Science Publishers, London (1981) 441
J. Barbehön, K.-H. Döhle, M. Schütze: Meßdatenerfassung mit Hilfe des Personalcomputers bei Langzeitversuchen im Hochtemperaturwerkstoffprüflabor; Computer-Anwendung im Labor 3 (1984) 222
U. Bruch, K. Döhle, J. Pütz, A. Rahmel, M. Schütze, K.D. Schuhmacher: Comparison of the Corrosion Behaviour of Different High Temperature Alloys with and without Superimposed Creep Deformation in an Artificial Steam Reformer Atmosphere; in "Metallic Corrosion 1984", Bd. III, National Research Council Canada, Toronto (1984) 325
M. Schütze, J. Barbehön, K.-H. Döhle: Automatisierte Meßdatenerfassung mit Hilfe des Personalcomputers bei der Ermittlung von Hochtemperatur-Festigkeitskennwerten; in "Werkstoffprüfung 1984", DVM, Berlin (1985) 167
W. Christl, A. Rahmel, M. Schütze: Application of the Acoustic Emission Technique for the Detection of Oxide Scale Cracking during Thermal Cycling; Materials Science and Engineering 87 (1987) 289-293
M. Schütze, K. Döhle, H. Fellmann: Untersuchung und Bewertung des Verhaltens von Hochtemperaturwerkstoffen unter gleichzeitiger thermisch-chemisch-mechanischer Belastung; in "Werkstoffprüfung 1987", DVM, Berlin (1987) 23
R. Luger, B. Genswürger-Geerißen, F. Petri, D. Puppel, M. Schütze: Transmissionselektronenmikroskopische Untersuchungen zum Ausscheidungsverhalten von CuNi10(Fe)-Legierungen; Z. Metallkunde 79 (1988) 259
M. Schütze: Ein auf dem Verständnis der Mechanismen basierendes Konzept zur Prüfung der Hochtemperaturkorrosionsbeständigkeit unter mechanischer Beanspruchung; in "Werkstoffprüfung 1988", DVM, Berlin (1988) 419
L. Hodulak, M. Schütze: Rechnerprogramm für PC zum Nachweis der Tolerierbarkeit von Fehlern für Komponenten des chemischen Apparatebaus; Mat.-wiss. u. Werkstofftech. 20 (1989) 236
B. Glaser, K. Rahts, M. Schorr, M. Schütze: Nachweis von Chloriden in metallischen Werkstoffen bei Hochtemperaturkorrosion; Sonderbände der Praktischen Metallographie 25 (1994) 75-84
S.R.J. Saunders, M.M. Nagl, M. Schütze: Measurement Methods for the Determination of Fracture Strain; Mater. High Temp. 12 (1994) 103-109
M. Schütze: Hochtemperaturkorrosion und mechanische Beanspruchung; in "Korrosion verstehen - Korrosionsschäden vermeiden", Hrsg. H. Gräfen, A. Rahmel, Verlag Irene Kuron, Bonn (1994) 402-410
K. Rahts, M. Schorr, M. Schütze, M. Schmitz-Niederau: Darstellung von Oxidschichten und Gefüge von TiAl-Legierungen aus Hochtemperaturversuchen; Praktische Metallographie 27 (1995) 561-565
C. Lang, M. Schütze: TEM Investigations of the Early Stages of TiAl Oxidation; Oxidation of Metals 46 (1996) 255-285
C. Bruns, M. Schütze: Messung der Haftfestigkeit von Deckschichten mittels Schallemissionsanalyse; Berichtsband 58 "Statusberichte zur Entwicklung und Anwendung der Schallemissionsanalyse", Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V. Berlin (1997) 235-237
K. Rahts, M. Nöth, M. Schulte, M. Schorr, P. Gawenda, M. Schütze: Untersuchungen an Sulfidschichten verschiedener Hochtemperaturwerkstoffe aus thermischer Beanspruchung in H₂S-haltiger Atmosphäre; Sonderbände der Praktischen Metallographie 28 (1997) 229-236
M. Schütze, C. Bruns: Stresses and Adhesion of Surface Scales; in "Corrosion-Deformation Interactions", Hrsg. T. Magnin, EFC-Publ. No. 21, The Institute of Materials, London (1997) 308-318
K. Rahts, M. Schorr, C. Schwalm, M. Schütze: Untersuchungen über den Einfluß von Chlor bei der Hochtemperaturoxidation; Praktische Metallographie 29 (1998) 305-311
F. Dettenwanger, H. Echsler, C. Bruns, M. Schütze: Investigation of Damage Mechanisms in Thermal Barrier Coatings by Acoustic Emission; in "Elevated Temperature Coatings: Science and Technology III", Hrsg. J.M. Hampikian, N.B. Dahotre, TMS, Warrendale (1999)
K. Rahts, M. Schorr, C. Schwalm, M. Schütze: Wasserfreie Präparationsmethode zum Nachweis von Chloriden bei der Hochtemperaturoxidation in chlorhaltigen Atmosphären; Praktische Metallographie 36 (1999) 86-97
G. Schumacher, F. Dettenwanger, M. Schütze, J.D. Sunderkötter, M.F. Stroosnijder: TEM-Investigations of Oxidized Y-implanted PM Chromium; in "Solution of Corrosion Problems in Advanced Technologies", Hrsg. G. Schmitt, M. Schütze, Kapitel 2/30, DECHEMA, Frankfurt am Main (1999)
E. Berghof-Hasselbächer, M. Schütze: Ein alternatives Schliffpräparationsverfahren zur Verbesserung der optischen Darstellung und Differenzierung nichtmetallischer Schichten gegenüber dem Einbettmittel; Sonderbände der Praktischen Metallographie 31 (2000) 319-325
G. Schumacher, F. Dettwanger, M. Schütze, A. Iberl, D. Reil: XRD Investigations of the Phosphorus Effect on the Oxidation of TiAl Alloys by High-Resolution Methods; Oxidation of Metals 54 (2000) 317-337
C. Bruns, M. Schütze: Investigation of the Mechanical Properties of Oxide Scales on Nickel and TiAl; Oxidation of Metals 55 (2001) 35-68
M. Schütze, S. Ito, W. Przybilla, H. Echsler, C. Bruns: Test Methods and Data on the Mechanical Properties of Protective Oxide Scales; Materials at High Temperatures 18 (2001) 39-50
E. Berghof-Hasselbächer, H.-E. Bühler, O. Greven, M. Schorr, J. Schürhoff, M. Schütze: Untersuchungen zum Bauteilversagen von Rostsystemen bei der Restholzverbrennung; Praktische Metallographie 39 (2002) 369-386
E. Berghof-Hasselbächer, C. Rosado Sainz-Rosas, M. Schütze: Korrosionsschutzschichten gegen Metal Dusting Angriff; Sonderbände der Praktischen Metallographie 34, Hrsg. G. Petzow, Werkstoff-Informationsgesellschaft, Frankfurt am Main (2002) 271-281
E. Berghof-Hasselbächer, C. Rosado Sainz-Rozas, M. Schütze: Korrosionsschutzschichten gegen Metal Dusting Angriff; Praktische Metallographie 40 (2003) 407-419
E. Berghof-Hasselbächer, A. Littner, M. Schütze, M. Schorr, P. Gawenda: Charakterisierung von Al- und PtAl-Diffusionsbeschichtungen auf Ni-Basis-Superlegierungen; Sonderbände der Praktischen Metallographie 35 (2004) 325-336
E. Berghof-Hasselbächer, E. Nicolas, V. Rohr, M. Schütze: Bildanalytische Schichtdickenbestimmung an Al-Diffusionsbeschichtungen; Sonderbände der praktischen Metallographie 36 (2004) 451-457
E. Berghof-Hasselbächer, M. Schorr, P. Gawenda, M. Schütze: Potentiale und Grenzen der Interferenzschichten-Metallographie bei der Charakterisierung von Karbidtypen am Beispiel hitzebeständiger Schleudergusswerkstoffe; Sonderbände der praktischen Metallographie 37 (2005) 173-179
D. Renusch, M. Schütze: Experience with the use of the acoustic emission technique for monitoring scale failure in wet and dry environments; Materials at High Temperatures 22 (2005) 33-45
E. Berghof-Hasselbächer, E. Nicolas, V. Rohr, M. Schütze: Bildanalytische Schichtdickenbestimmung an Al-Diffusionsbeschichtungen; Praktische Metallographie 43 (2006) 127-142
B. Isecke, M. Schütze, H.-H. Strehblow: Measurement methods for materials performance - corrosion; Springer Handbook of Materials Measurement Methods, Hrsg. H. Czichos, T. Saito, L. Smith, Springer-Verlag (2006) 611-684
M. Schütze, M. Malessa: Reliable assessment of high temperature oxidation resistance by the development of a comprehensive code of practice for thermocycling oxidation testing - European COTEST project; Materials and Corrosion 57 (2006) 5-13
E. Berghof-Hasselbächer, M. Schorr, P. Gawenda, M. Schütze, J.J. Hoffman: Entwicklung eines Mikrostrukturatlanten für die neuesten hitzebeständigen Schleudergusswerkstoffe; Sonderbände der Praktischen Metallographie 39 (2007) 81-88
M. Schütze, E. Berghof-Hasselbächer, J.J. Hoffman: Development of an atlas of microstructures for the latest heat-resistant cast alloys; NACE Corrosion 2007, Paper 07425/1-11
E. Berghof-Hasselbächer, S. Diliberto, P. Gawenda, P.J. Masset, G. Schmidt, M. Schütze: Metallographische Untersuchungen der Mikrostrukturen von technischen TiAl-Legierungen; Sonderbände der praktischen Metallographie 40 (2008) 117-124
E. Berghof-Hasselbächer, P. Gawenda, M. Schorr, M. Schütze, J.J. Hoffman: Atlas of Microstructures; Materials Technology Institute, St. Louis (2008)
E. Berghof-Hasselbächer, M. Schorr, P. Gawenda, M. Schütze, J.J. Hoffman: Entwicklung eines Mikrostrukturatlanten für die neuesten hitzebeständigen Schleudergusswerkstoffe; Praktische Metallographie 45 (2008) 441-454
E. Berghof-Hasselbächer, P.J. Masset, D. Texier, G. Schmidt, P. Gawenda, M. Jusek, M. Schütze: Mikrostrukturen von NiAl_(1-x)Hf_(x)-Legierungen (x=0…0,2); Sonderbände der Praktischen Metallographie 41 (2009) 113-119
I. Teliban, C. Thede, S. Chemnitz, C. Bechtold, W.J. Quadakkers, M. Schütze, E. Quandt: Magnetic moment investigation by frequency mixing techniques; Review of Scientific Instruments 80 (2009) 115106
E. Berghof-Hasselbächer, P. Gawenda, P.J. Masset, G. Schmidt, M. Schütze, S. Diliberto: Metallographische Untersuchungen der Mikrostrukturen von technischen TiAl-Legierungen; Praktische Metallographie 47 (2010) 65-83
B. Isecke, M. Schütze, H.-H. Strehblow: Measurement methods for materials performance - corrosion; Springer Handbook of Materials Measurement Methods, 2nd Edition, Hrsg. H. Czichos, T. Saito, L. Smith, Springer-Verlag (2011) 611-684

Korrosion und Korrosionsschutz in flüssigen Medien

K.H. Büttgen, D. da Silva Rosa, B. du Bois, P. Gawenda, A. Rahmel, K. Rahts, M. Schütze: Stimulation of aqueous corrosion by MoS2 deposits; Materials and Corrosion 49 (1998) 505-511
T. Hollstein, T. Graas, K. Bundschuh, M. Schütze: Das Korrosionsverhalten unterschiedlicher Siliciumnitride in wäßrigen Lösungen; Keramische Zeitschrift 50 (1998) 416-421
H.-Q. Nguyen, W. Fürbeth, M. Schütze: Nano-enamel: a new way to produce glass-like protective coatings for metals; Materials and Corrosion 53 (2002) 772-782
S. Benfer, W. Fürbeth, M. Schütze: Nanopartikelbasierte Schichten für die Emailreparatur; CAV Chemie-Anlagen + Verfahren (5/2006) 44-46
F. Feil, W. Fürbeth, M.Schütze: Kleine Teilchen auf leichtem Metall - Nanopartikel-basierte anorganische Schutzschichten für Magnesiumwerkstoffe; Metalloberfläche 60 (11) (2006) 38-41
F. Feil, W. Fürbeth, M.Schütze: Nanopartikel-basierte anorganische Schutzschichten für Magnesiumwerkstoffe; Tagungsband Oberflächentage 2006 (CD), Bonn (2006)

Rolle des Mikrogefüges

B. Reppich, H. Bügler, R. Leistner, M. Schütze: Application of the Microstructural Concept of Creep and Rupture Life Time to a γ'-Precipitating Ni-Base Alloy I. Yielding and Creep Behaviour; in "Creep and Fracture of Engineering Materials and Structures", Hrsg. B. Wilshire, D. Owen, Pineridge Press, Swansea (1984) 279
R. Luger, B. Genswürger-Geerißen, F. Petri, D. Puppel, M. Schütze: Transmissionselektronenmikroskopische Untersuchungen zum Ausscheidungsverhalten von CuNi10(Fe)-Legierungen; Z. Metallkunde 79 (1988) 259
R. Luger, M. Schütze: Einfluß des Fe-Gehalts und der Auslagerungszeit auf mechanische, elektrische und magnetische Eigenschaften der Legierung CuNi10(Fe); Mat.-wiss. u. Werkstofftech. 20 (1989) 60
G. Luxenburger, M. Schütze: Einfluß der Carbidstruktur auf das Kriechverhalten der hitzebeständigen Edelstahl-Gußlegierung HK40; Z. Metallkunde 82 (1991) 430
G. Schumacher, F. Dettenwanger, M. Schütze, J.D. Sunderkötter, M.F. Stroosnijder: TEM-Investigations of Oxidized Y-implanted PM Chromium; in "Solution of Corrosion Problems in Advanced Technologies", Hrsg. G. Schmitt, M. Schütze, Kapitel 2/30, DECHEMA, Frankfurt am Main (1999)
E. Berghof-Hasselbächer, P. Gawenda, M. Schorr, M. Schütze, J.J. Hoffman: Atlas of Microstructures; Materials Technology Institute, St. Louis (2008)
H. Latreche, G. Bozzolo, P.J. Masset, T. Weber, M. Schütze: Measurements of the coefficient of thermal expansion (CTE) of NiAlMo alloys and comparison with modelling predictions; Materials Science and Engineering: A 527/21-22 (2010) 5837
E. Berghof-Hasselbächer, P.J. Masset, L. Zhang, L. Liu, Z. Jin, G. Schmidt, M. Galetz, M. Schütze: Mikrostrukturen von Erbium-modifizierten Aluminium-Kupfer-Legierungen; Sonderbände der Praktischen Metallographie 43 (2011) 77-83
E. Berghof-Hasselbächer, P.J. Masset, L. Zhang, L. Liu, Z. Jin, G. Schmidt, M. Galetz, M. Schütze: Microstructures of Erbium Modified Aluminium-Copper Alloys; Pract. Metallogr. 49 (2012) 7, 396-411
E. Berghof-Hasselbächer, M. Schütze, R. Durham, M. Galetz, G. Schmidt, J.J. Hoffman: Entwicklung eines Mikrostrukturatlanten für die neuesten hitzebeständigen Schleudergusswerkstoffe 35/45LC, HPLC, 20-32Nb und den Schmiedewerkstoff Haynes 230 auf Ni-Basis; Sonderbände der Praktischen Metallographie 44 (2012) 203-209

Mechanische Hochtemperatureigenschaften ohne Korrosion

B. Reppich, H. Bügler, R. Leistner, M. Schütze: Application of the Microstructural Concept of Creep and Rupture Life Time to a γ'-Precipitating Ni-Base Alloy I. Yielding and Creep Behaviour; in "Creep and Fracture of Engineering Materials and Structures", Hrsg. B. Wilshire, D. Owen, Pineridge Press, Swansea (1984) 279
L. Hodulak, M. Schütze: Rechnerprogramm für PC zum Nachweis der Tolerierbarkeit von Fehlern für Komponenten des chemischen Apparatebaus; Mat.-wiss. u. Werkstofftech. 20 (1989) 236
G. Luxenburger, M. Schütze: Einfluß der Carbidstruktur auf das Kriechverhalten der hitzebeständigen Edelstahl-Gußlegierung HK40; Z. Metallkunde 82 (1991) 430
K. Rüdinger, M. Schütze: Beitrag zum Zeitstandverhalten von Titan für die Anwendung im chemischen Apparatebau; Mat.-wiss. u. Werkstofftechn. 22 (1991) 1

Nanotechnologie

W. Fürbeth, H.-Q. Nguyen, F. Dettenwanger, M. Schütze: Development of new corrosion resistant coatings for light metals by sintering of nanopowders; Proc. Eurocorr 2000 (CD), London
W. Fürbeth, H.-Q. Nguyen, F. Dettenwanger, M. Schütze: New developments for corrosion resistant coatings for light metals and steel based on chemical nanotechnology; Proc. EUROCORR 2001 (CD) Associazione Italiana di Metallurgia, Milano (2001)
H.-Q. Nguyen, W. Fürbeth, M. Schütze: Nano-enamel: a new way to produce glass-like protective coatings for metals; Materials and Corrosion 53 (2002) 772-782
W. Fürbeth, H.-Q. Nguyen, M. Schütze: Development of new corrosion resistant coatings based on chemical nanotechnology; Proc. Int. Symposium "Corrosion Science in the 21st century", UMIST, Manchester (2003) (CD), The Journal of Corrosion Science and Engineering, Vol. 6 (2003)
W. Fürbeth, H.-Q. Nguyen, M. Schütze: Nanoenamel - new technologies for functional coatings; ACHEMA-Magazine/ Special edition of Process, Vogel Verlag (2003) 74-75
W. Fürbeth, H.-Q. Nguyen, M. Schütze: Nanopulver-Schichten als Korrosionsschutz für Leichtmetallegierungen; Tagungsband 1. KKF-Kolloquium Gemeinsame Forschung im Korrosionsschutz - Problemlösungen für den metallischen Leichtbau, Januar 2003, GfKORR e.V., Frankfurt (2003)
W. Fürbeth, H.-Q. Nguyen, M. Schütze: Neue Korrosionsschutzschichten für Metalle auf der Basis chemischer Nanotechnologie; Proc. Oberflächentage 2003, DGO, Düsseldorf (2003)
W. Fürbeth, H.-Q. Nguyen, M. Schütze: Kleine Ursache mit großer Wirkung: Neue Korrosionsschutzschichten für Metalle auf Basis chemischer Nanotechnologie; Metalloberfläche 58 (2004) 31-36
S. Benfer, W. Fürbeth, M. Schütze: Emailreparatur mit nanopartikulären Schichten; Mitteilungen des Deutschen Emailverbandes e.V. 53/5 (2005) 74-83
S. Benfer, W. Fürbeth, M. Schütze: Entwicklung von nanopartikelbasierten Schichten für die Emailreparatur; Tagungsband 6. Industriefachtagung Oberflächen- und Wärmebehandlungstechnik & 8. Werkstofftechnisches Kolloquium, Chemnitz (2005)
W. Fürbeth, S. Benfer, M. Schütze: Repair of technical enamels through nanotechnology; Proc. EUROCORR 2005, Lissabon (2005)
W. Fürbeth, H.-Q. Nguyen. M. Schütze: Nanopartikelbasierte Korrosionsschutzschichten für Leichtmetalle; Tagungsband Thüringer Grenz- und Oberflächentage, Jena (2005)
W. Fürbeth, H.-Q. Nguyen, M. Schütze: Neuartige Korrosionsschutzschichten für Metalle auf der Basis oxidischer Nanopartikel; Tagungsband 6. Wörlitzer Workshop Funktionelle Schichten, Europäische Forschungsgesellschaft Dünne Schichten e.V., Dresden (2005)
W. Fürbeth, M. Schütze: Novel corrosion protective coatings based on nanomaterials; Report Nato-RTO Specialist Meeting AVT-122 Nanomaterials Technology for Military Vehicle Structural Applications, Granada (2005)
S. Benfer, W. Fürbeth, M. Schütze: Email vor Ort reparieren; cav - Chemie-Anlagen + Verfahren (2006) (5) 44-46
F. Feil, W. Fürbeth, M.Schütze: Kleine Teilchen auf leichtem Metall - Nanopartikel-basierte anorganische Schutzschichten für Magnesiumwerkstoffe; Metalloberfläche 60 (11) (2006) 38-41
F. Feil, W. Fürbeth, M.Schütze: Nanopartikel-basierte anorganische Schutzschichten für Magnesiumwerkstoffe; Tagungsband Oberflächentage, Bonn (2006)

Übersichtsbeiträge

M. Schütze: Fundamentals of High Temperature Corrosion; in "Corrosion and Environmental Degradation", Hrsg. R.W. Cahn et al., Wiley-VCH (2000) 67-130
W. Fürbeth, M. Schütze: Progress in corrosion protection as a requirement for technical progress; Materials and Corrosion 60 (2009) 481-494
M. Schütze: Konzepte für die Entwicklung von Schutzschichten für aggressive Hochtemperaturumgebungen; in "Dampferzeugerkorrosion", Saxonia Standortentwicklungs- und -verwaltungsgesellschaft mbH, Freiberg/Sachsen (2009) 169-188
M. Schütze, W. Fürbeth: Innovative Entwicklungen im Bereich Korrosionsschutz von Metallen; Tagungsband 5. Thüringer Grenz- und Oberflächentage, Innovent e.V., Jena (2009) 65-73
M. Schütze: Diffusion Aspects in High Temperature Corrosion and in the Development of Protective Coatings; Defect and Diffusion Forum 323-325 (2012)19-29

Bücher

M. Schütze: Die Korrosionsschutzwirkung oxidischer Deckschichten unter thermisch-chemisch-mechanischer Werkstoffbeanspruchung; Materialkundlich-Technische Reihe, Vol. 10, Hrsg. G. Petzow & F. Jeglitsch, Gebr. Borntraeger Verlag, Berlin 1991
H.J. Grabke, M. Schütze (Hrsg.): Oxidation of Intermetallics; Wiley-VCH, Weinheim 1997
M. Schütze: Protective Oxide Scales and Their Breakdown; Series on Corrosion and Protection, Vol. 1, Hrsg. D.R. Holmes, John Wiley and Sons, Chichester 1997
M. Schütze, W.J. Quadakkers (Hrsg.): Cyclic Oxidation of High Temperature Materials; The Institute of Materials, London 1999
G. Schmitt, M. Schütze (Hrsg.): Solution of Corrosion Problems in Advanced Technologies; DECHEMA, Frankfurt am Main 1999
M. Schütze (Hrsg.): Corrosion and Environmental Degradation; Bd. 19 der Reihe "Materials Science and Technology", Hrsg. R.W. Cahn et al., Wiley-VCH, Weinheim 2000
M. Schütze, W.J. Quadakkers, J.R. Nicholls (Hrsg.): Lifetime Modelling of High Temperature Corrosion Processes; Maney Publishing, London 2001
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 1: Sodium Hydroxide, Mixed Acids; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2005
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 2: Hydrochloric Acid, Nitric Acid; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2005
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 3: Hypochlorites, Phosphoric Acid; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2005
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 4: Drinking Water, Waste Water (Municipal), Waste Water (Industrial); DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2005
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 5: Carbonic Acid, Chlorine Dioxide, Seawater; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2005
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 6: Atmosphere, Industrial Waste Gases; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2006
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 7: Sodium Chloride; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2006
H.J. Grabke, M. Schütze (Hrsg.): Corrosion by carbon and nitrogen: Metal dusting, carburisation and nitridation; Woodhead Publishing, Cambridge 2007
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 8, Part A: Chlorinated Hydrocarbons - Chloromethanes; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2007
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 8, Part B: Chlorinated Hydrocarbons - Chloroethanes, Alkanols; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2007
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 9: Potassium Hydroxide, Ammonium and Ammonium Hydroxide; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2007
M. Schütze, M. Malessa (Hrsg.): Standardisation of thermal cycling exposure testing; Woodhead Publishing, Cambridge 2007
E. Berghof-Hasselbächer, P. Gawenda, M. Schorr, M. Schütze, J.J. Hoffman: Atlas of Microstructures; Materials Technology Institute, St. Louis 2008
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 10: Sulfur Dioxide, Sodium Sulfate; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2008
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 11: Sulfuric Acid; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2008
M. Schütze, W.J. Quadakkers (Hrsg.): Novel approaches to improving high temperature corrosion resistance; EFC no. 47, Woodhead, Cambridge 2008
G. Kreysa, M. Schütze (Hrsg.): Corrosion Handbook, Vol. 12: Ferrous Chlorides; DECHEMA e.V., WILEY-VCH, Frankfurt am Main und Weinheim 2009

Beiträge in der allgemeinen Presse

C. Hirche, M. Schütze: Werkstoffinnovationen öffnen den Weg zu hochleistungsfähigen neuen Produkten; Frankfurter Allgemeine Zeitung, 7. Dezember 1992
P.P. Schepp, M. Schütze: Messen, Tagungen, Veranstaltungen - auf den Erfahrungsaustausch kommt es bei Werkstoffen an; Frankfurter Allgemeine Zeitung, 25. Januar 1993
M. Schütze: Hitze läßt neue Werkstoffe kalt; Chemische Industrie 10 (1993) 38-40
M. Schütze: Aus dem Weltraum auf die Erde geholt; Chemische Industrie 12 (1995) 39-40
M. Schütze: Korrosion in der Hochtemperaturtechnik; Spektrum der Wissenschaft Juli (1998) 100-108
M. Schütze: Beschichtete Stahlbehälter halten aggressiven Medien stand; Handelsblatt, 21. April 1999
M. Schütze: Korrosion - Vergangenheit, Heute und Zukunft; Chemie Ingenieur Technik 75 (2003) 1534-1538
M. Schütze: Chemiewerkstoffe; Werkstoffe in der Fertigung (2005) 4
M. Schütze: Was Menschen bewegt, die etwas bewegen; CITplus 1/2 (2006) 6