Talks - Prof. Dr.-Ing. Michael Schütze

1. K.-H. Döhle, A. Rahmel, M. Schmidt, M. Schütze
   Two Different Test Rigs for Creep Experiments in Aggressive Environments
   Europ. Symp. 'Corrosion and Mechanical Stress at High Temperatures', Petten/NL, 13.-14. May 1980
2. M. Schütze, A. Rahmel
   Observations on the Cracking Behaviour of Oxide Scales During Creep of the Base Metal and on Creep Enhanced Internal Corrosion
   Int. Conf. 'Corrosion Resistant Materials for Coal Conversion Systems', London/GB, 5.-7. May 1982
3. M. Schütze, A. Rahmel
   Das Verhalten von Oxidschichten unter mechanischer Belastung
   Symp. 'Aufbau von Oxidschichten auf Hochtemperaturwerkstoffen und ihre technische Bedeutung', Augsburg, 30. September - 1. October 1982
4. M. Schütze
   Das Verhalten hitzebeständiger Stähle unter gleichzeitiger Belastung durch Hochtemperaturkorrosion und Kriechverformung im Zeitstanddehngeschwindigkeitsbereich
   VDI-Jahrestagung '83 'Werkstoff - Bauteil - Schaden', München, 9.-10. March 1983
5. M. Schütze
   The Influence of High Temperature Corrosion on Creep and Fracture Behaviour of Heat Resistant Steels
   2nd Int. Conf. 'Creep and Fracture of Engineering Materials and Structures', Swansea/GB, 1.-6. April 1984
6. B. Ilschner, M. Schütze
   Interaction Between Oxidation (Sulfidation, Carburization) and Creep
   Int. Workshop 'New Contributions to the Mechanisms of High Temperature Corrosion', Bad Honnef, 2.-4. May 1984
7. M. Schütze, J. Barbehön, K.-H. Döhle
   Automatisierte Meßdatenerfassung mit Hilfe des Personalcomputers bei der Ermittlung von Hochtemperatur-Festigkeitskennwerten
   Tagung 'Werkstoffprüfung 1984' Bad Nauheim, 6.-7. December 1984
8. M. Schütze
   Oxidische Deckschichten und Hochtemperaturkorrosionsbeständigkeit von metallischen Werkstoffen
   Metallfachabend der DGM, Frankfurt am Main, 6. February 1985
9. M. Schütze
   Automatisierte Meßdatenerfassung und Prüfapparaturensteuerung mit Hilfe des Personalcomputers
   ACHEMA '85 Frankfurt am Main, 9.-15. June 1985
10. M. Schütze
    The Limits to the Protective Effect of Oxide Scales on High Temperature Materials which are Subjected to Strains
    Int. Conf. 'High Temperature Materials - Their Exploitable Potential', Petten/NL, 15.-17. October 1985
11. M. Schütze
    Assessment of Materials Behaviour under Combined Attack from High Temperature Corrosion and Mechanical Stress
    Conf. 'Designing with High Temperature Materials', York/GB, 7.-9. April 1986
12. W. Christl, A. Rahmel, M. Schütze
    Application of the Acoustic Emission Technique for the Detection of Oxide Scale Cracking during Thermal Cycling
    Int. Symp. 'High Temperature Corrosion of Materials and Coatings for Energy Systems and Turboengines' Marseille/F, 7.-11. July 1986
13. M. Schütze, J. Barbehön, A. Rahmel
    The Oxidation Behaviour of a 9.5Cr-Steel at 650ºC with and without Superimposed LCF-Deformation
    COST - EPRI - Workshop 'Creep-Resistant 9-12% Cr Steels', Schaffhausen/CH, 13.-14. October 1986
14. M. Schütze
    Das Verhalten hitzebeständiger Werkstoffe bei gleichzeitiger Hochtemperaturkorrosion und mechanischer Beanspruchung
    Werkstoffwissenschaftliches Kolloquium der Universität Erlangen-Nürnberg, Erlangen, 10. February 1987
15. M. Welker, M. Schütze, A. Rahmel
    Untersuchungen zur Wechselwirkung zwischen Korrosion und Rißfortschritt bei Hochtemperatur-Kriechverformung
    Sitzung des DVM-Arbeitskreises 'Bruchvorgänge', Freiburg, 16.-18. March 1987
16. R. Luger, B. Genswürger-Geerißen, A. Rahmel, M. Schütze
    Transmissionselektronenmikroskopische Untersuchungen zum Ausscheidungsverhalten von CuNi10(Fe)-Legierungen
    DGM-Hauptversammlung 1987, Saarbrücken, 9.-12. June 1987
17. M. Schütze
    Behaviour of Oxide Scales Under Isothermal LCF and Under Thermal Cycling Conditions
    Gordon Research Conference 'Corrosion', New London/USA, 20.-24. July 1987
18. J. Barbehön, A. Rahmel, M. Schütze
    Investigations on the Interaction of LCF and Oxidation
    2nd Int. Conf. 'Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials', München, 7.-11. September 1987
19. M. Schütze
    Verhalten von Schutzschichten und Werkstoffen bei komplexer thermisch-chemisch-mechanischer Belastung
    Symposion über Ergebnisse des Forschungs- und Entwicklungsprogramms 'Korrosion und Korrosionsschutz' des BMFT, Lahnstein, 12.-16. October 1987
20. M. Schütze
    Stresses and Decohesion of Oxide Scales
    Institute of Metals-Meeting 'Oxide-Metal Interface and Adherence', London/GB, 13. October 1987
21. M. Schütze, K. Döhle, H. Fellmann
    Untersuchung und Bewertung des Verhaltens von Hochtemperaturwerkstoffen unter gleichzeitiger thermisch-chemisch-mechanischer Belastung
    DVM-Tagung 'Werkstoffprüfung 1987', Bad Nauheim, 3.-4. December 1987
22. M. Schütze
    Anrißentstehung und Anrißwachstum unter korrosiven Bedingungen bei hohen Temperaturen
    Sitzung des DVM-Arbeitskreises   "Bruchvorgänge", Frankfurt am Main, 17.-18. March 1988
23. M. Schütze
    Ein auf dem Verständnis der Mechanismen basierendes Konzept zur Prüfung der Hochtemperaturkorrosionsbeständigkeit unter mechanischer Beanspruchung
    DVM-Tagung 'Werkstoffprüfung 1988', Bad Nauheim, 1.-2. December 1988
24. M. Schütze
    The Plasticity of Protective Oxide Scales
    Institute of Metals - Meeting 'Oxidation and Mechanical Properties', London/GB, 15. March 1989
25. M. Schütze
    The Role of the Interaction of Corrosion and Mechanical Factors for Degradation of Materials (Keynote Lecture)
    2nd International Symposium on High Temperature Corrosion, Les Embiez/F, 22.-26. May 1989
26. M. Schütze
    Concept for the Assessment of the Contribution to Damage by the Interaction of High Temperature Corrosion and Mechanical Stresses
    9th European Congress on Corrosion, Utrecht/NL, 2.-6. October 1989
27. G. Luxemburger, M. Schütze
    Einfluß der Karbidstruktur auf das Kriechverhalten der hitzebeständigen Gußlegierung HK 40
    DGM-Hauptversammlung, Osnabrück, 5.-8. June 1990
28. M. Schütze
    The Interaction of High Temperature Corrosion and Mechanical Factors
    Int. Symp. High Temperature Corrosion and Protection, Shenyang/VRC, 26.-29. June 1990
29. M. Schütze
    Failure of Oxide Scales on Advanced Materials Due to the Presence of Stresses
    Int. Symp. Solid State Chemistry of Advanced Materials, Tokyo, 3.-7. December 1990
30. M. Schütze
    Kriechrißwachstum in Stählen
    Habilitationsvortrag an der Fakultät für Bergbau, Hüttenwesen und Geowissenschaften der RWTH Aachen, 9. January 1991
31. M. Schütze, H. Fellmann, B. Glaser
    Untersuchungen zum Kriechrißwachstum in Luft und O2-SO2
    DVM-Vortragsveranstaltung "Bruchvorgänge", Berlin, 26.-27. February 1991
32. I. Küppenbender, M. Schütze
    Deformation and Cracking Behaviour of NiO Scales on Nickel
    Gordon Research Conference on Corrosion, New London/USA, 15.-19. July 1991
33. A. Rahmel, M. Schütze
    A Refined Approach to Compressive Scale Failure and its Discussion in the Light of the Reactive Element Effect
    Gordon Research Conference on Corrosion, New London/USA, 15.-19. July 1991
34. M. Schütze
    Stresses in Oxide Scales
    Materials Science Seminar, University of Pittsburgh, Pittsburgh/USA, 19. September 1991
35. M. Schütze
    The Role of Mechanical Stresses in Oxidation
    Seminar of the Dept. of Engineering Research, University of Illinois, Chicago/USA, 20. September 1991
36. M. Schütze, M. Welker, H. Fellmann, B. Glaser
    Creep Crack Growth of Materials for the Chemical and the Petrochemical Industries
    Int. ASM Conf. Heat-Resistant Materials, Lake Geneva/USA, 23.-26. September 1991
37. I. Küppenbender, M. Schütze
    Deformation and Cracking Behaviour of NiO Scales on Nickel
    EUROCORR' 91, Budapest/H, 21.-25. October 1991
38. M. Göbel, A. Rahmel, M. Schütze
    High Temperature Oxidation of Single-Crystal Superalloys
    EUROCORR' 91, Budapest/H, 21.-25. October 1991
39. S. Becker, A. Rahmel, M. Schütze
    Cyclic Oxidation Behaviour of TiAl and TiAl Alloys
    3rd International Symposium on High Temperature Corrosion and Protection of Materials, Les Embiez/F, 25.-29. May 1992
40. M. Göbel, A. Rahmel, M. Schütze
    Investigations into Oxide Scale Formation and Spallation of Several Nickel Base Single Crystal Superalloys during Thermal Cycling
    3rd International Symposium on High Temperature Corrosion and Protection of Materials, Les Embiez/F, 25.-29. May 1992
41. S. Becker, A. Rahmel, M. Schütze
    Einfluß von Nb auf die Oxidation von TiAl
    DGM-Hauptversammlung 1992, Hamburg, 9.-12. June 1992
42. S. Becker, A. Rahmel, M. Schütze
    Das Oxidationsverhalten von TiAl-Legierungen unter thermoyzklischer Beanspruchung
    DGM-Hauptversammlung 1992, Hamburg, 9.-12. June 1992
43. M. Schütze
    Mechanical Aspects of High Temperature Oxidation
    Int. Conf. Advances in Corrosion and Protection, Manchester/GB, 30. June - 3. July 1992
44. M. Schütze
    Fundamental Aspects of High Temperature Corrosion and the Role of Surface Layers in CDI
    Int. Conf. Corrosion - Deformation Interactions, Fontainebleau/F, 5.-7. October 1992
45. M. Schütze, H. Fellmann
    Corrosion Processes at Growing Creep Cracks
    Int. Conf. Corrosion-Deformation Interactions, Fontainebleau/F, 5.-7. October 1992
46. M. Schütze
    Advanced Materials for High Temperatures
    Seminar of the Institute for Microstructural Sciences
    National Research Council Canada, Ottawa/ CDN, 23. April 1993
47. S. Melsheimer, A. Rahmel, M. Schütze
    Mechanisms of High Temperature Oxidation of Molydenum- and Titanium-Disilicides
    Internationales Plansee-Seminar '93, Plansee/A, 24.-28. May 1993
48. M. Schmitz-Niederau, M. Schütze, A. Schrey, O. Knotek
    Das Oxidationsverhalten verschiedener dünner Schichten auf TiAl bei 900ºC an Luft
    DGM-Hauptversammlung, Friedrichshafen, 1.-4. June 1993
49. M. Schütze
    Oxide Scale Cracking and Healing on TiAl
    Materials Seminar, NASA-Lewis Research Center, Cleveland/USA, 10. June 1993
50. M. Schulte, M. Schütze
    The Behaviour of Protective Sulfide Scales on Various Steels in H2S-Containing Atmospheres During Temperature Changes
    10th European Corrosion Congress, Barcelona/E, 5.-8. July 1993
51. M. Schütze, I. Küppenbender, M. Schmitz
    Interaction Between Stresses and Oxidation: Pseudoplastic NiO Scales and Surface Processes During the Oxidation of TiAl
    Gordon Research Conference on High Temperature Corrosion, New London/USA, 18.-23. July 1993
52. M. Schütze, B. Glaser
    The Role of Environmental Effects for the Mechanical Behaviour of Materials at High Temperatures
    JIMIS-7, Nagoya/J, 27.-31. July 1993
53. M. Schütze, M. Schulte
    The Behaviour of Sulfide Scales Formed in H2S-Atmospheres on Heat-Exchanges Tubes under the Influence of Temperature Changes
    International Symposium on High Temperature Materials to Solve Global Environmental Problems, Tokyo/J, 28.-30. August 1993
54. M. Schütze, M. Schmitz-Niederau
    The Oxidation Behaviour of Titanium-Aluminides Under the Effect of Mechanical Stresses
    3rd IUMRS Int. Conf. on Advanced Materials, Tokyo/J, 31. August - 4. September 1993
55. M. Schütze
    Rißwachstum in chlorhaltigen Atmosphären
    Jahreskolloquium des Karl-Winnacker-Instituts der DECHEMA e.V., Frankfurt am Main, 18. November 1993
56. M. Schütze
    Verhalten von Oxidschichten bei Temperaturwechselbelastung
    6. Symposion über Ergebnisse des Forschungs- und Entwicklungsprogrammes Korrosion und Korrosionsschutz, Leipzig, 22.-25. November 1993
57. M. Schütze
    Einfluß korrosiver Atmosphären auf das Kriechrißwachstum
    6. Symposion über Ergebnisse des Forschungs- und Entwicklungsprogrammes Korrosion und Korrosionsschutz, Leipzig, 22.-25. November 1993
58. S. Melsheimer, A. Rahmel, M. Schütze
    Oxidation von Molybdän- und Titandisilicid bei hohen Temperaturen
    6. Symposion über Ergebnisse des Forschungs- und Entwicklungsprogrammes Korrosion und Korrosionsschutz, Leipzig, 22.-25. November 1993
59. M. Schmitz-Niederau, M. Schütze, A. Rahmel
    Rißausheilvorgänge in Oxidschichten auf Ti36Al und Ti35Al5Nb
    6. Symposion über Ergebnisse des Forschungs- und Entwicklungsprogrammes Korrosion und Korrosionsschutz, Leipzig, 22.-25. November 1993
60. M. Schulte, M. Schütze
    Die Rolle von Spannungen in schützenden Sulfidschichten auf unterschiedlichen Stählen des Apparatebaus
    6. Symposion über Ergebnisse des Forschungs- und Entwicklungsprogrammes Korrosion und Korrosionsschutz, Leipzig, 22.-25. November 1993
61. M. Schütze
    Simultaneous Corrosion and Mechanical or Thermal Stresses
    European Workshop on Methods and Testing in High Temperature Corrosion, Frankfurt/M., 20.-21. January 1994
62. M. Schütze
    Hochtemperaturkorrosion bei gleichzeitiger mechanischer oder Temperaturwechselbeanspruchung
    DGM-Hauptversammlung 1994 "75 Jahre DGM", Göttingen, 24.-27. May 1994
63. T. Link, A. Rahmel, M. Schütze
    Einfluß gasförmiger Verunreinigungen in Luft auf die Hochtemperaturkorrosion ausgewählter unbeschichteter und beschichteter Nickelbasis-Superlegierungen
    DGM-Hauptversammlung 1994 "75 Jahre DGM", Göttingen, 24.-27. May 1994
64. M. Schulte, M. Schütze
    Die Rolle von Spannungen in schützenden Sulfidschichten auf unterschiedlichen Stählen des Apparatebaus
    DGM-Hauptversammlung 1994 "75 Jahre DGM", Göttingen, 24.-27. May 1994
65. M. Schmitz-Niederau, M. Schütze
    Untersuchung der Vorgänge bei der Oxidschichtrißbildung auf TiAl-Legierungen
    DGM-Hauptversammlung 1994 "75 Jahre DGM", Göttingen, 24.-27. May 1994
66. S. Melsheimer, A. Rahmel, M. Schütze
    Disilicide als Struktur- und Beschichtungswerkstoff bei hohen Temperaturen
    DGM-Hauptversammlung 1994 "75 Jahre DGM", Göttingen, 24.-27. May 1994
67. C. Lang, M. Schütze
    Elektronenmikroskopische Untersuchungen zur Anfangsoxidation von Titanaluminiden
    DGM-Hauptversammlung 1994 "75 Jahre DGM", Göttingen, 24.-27. May 1994
68. M. Schütze
    Approach to a Global Model of the Mechanical Effects in Oxide Scale Deformation
    Int. Workshop on Mechanical Properties of Protective Oxide Scales, London, 20.-23. June 1994
69. S.R.J. Saunders, M.M. Nagl, M. Schütze
    Measurement Methods for the Determination of Fracture Strain
    Int. Workshop on Mechanical Properties of Protective Oxide Scales, London, 20.-23. June 1994
70. A.M. Huntz, M. Schütze
    Stresses Generated During Oxidation Sequences and High Temperature Fracture
    Int. Workshop on Mechanical Properties of Protective Oxide Scales, London, 20.-23. June 1994
71. M. Schütze
    Behavior of Scales Under Mechanical Loadings
    Int. Workshop on High Temperature Corrosion, Gorisch, 15.-19. August 1994
72. M. Schütze, A. Rahmel, M. Schorr, M. Göbel, W.T. Wu
    Interdiffusion Between the Platinum-Modified Aluminide Coating RT 22 and Nickel-Base Single-Crystal Superalloys at 1000 and 1200ºC
    Conf. Materials for Advanced Power Engineering 1994, Lüttich/B., 3.-6. October 1994
73. M. Schütze, M. Schulte
    Die Rolle von Spannungen in Sulfidschichten für die H2S-Korrosionsbeständigkeit von Werkstoffen
    DECHEMA-Arbeitsausschuß "Prozeßgerechte Gestaltung und Fertigung von Apparaten", Frankfurt am Main, 13. October 1994
74. S. Melsheimer, A. Rahmel, M. Schütze
    Hochtemperaturoxidationsverhalten von Disiliziden als Struktur- und Beschichtungswerkstoffe
    BMFT-Symposium - Neue Werkstoffe, Würzburg, 2.-4. November 1994
75. M. Göbel, A. Rahmel, M. Schütze, W.T. Wu
    Untersuchungen zur Interdiffusion bei PtAl-Schutzschichten auf Nickelbasis-Einkristallen
    DGM/VDEh/DECHEMA-Gemeinschaftsausschuß "Hochtemperaturkorrosion", Heidelberg, 17. November 1994
76. M. Schütze
    Die Rolle von Sulfidschichten für die H2S-Korrosionsbeständigkeit von Werkstoffen und Bauteilen für Hochtemperaturanlagen der Chemie, der Energie- und der Umwelttechnik
    Jahreskolloquium des Karl-Winnacker-Instituts der DECHEMA, Frankfurt am Main,
    24. November 1994
77. M. Schütze
    The Mechanical Behaviour of Oxide Scales
    The Ritchie Materials Seminar, Lawrence Berkeley Laboratory, Berkeley/USA, 7. February 1995
78. M. Schütze, M. Schmitz-Niederau
    Interaction of Mechanical Loading and Oxidation at 700°C for TiAl
    International Symposium on Gamma Titanium Aluminides, Las Vegas/USA, 12.-16. February 1995
79. M. Schütze, C. Lang
    Mechanismen der Anfangsoxidation von TiAl
    DFG-Berichtskolloquium "Hochtemperaturkorrosion", Bonn, 11.-12. May 1995
80. M. Schütze, C. Bruns
    Untersuchungen zur Haftfestigkeit von Oxidschichten
    DFG-Berichtskolloquium "Hochtemperaturkorrosion", Bonn, 11.-12. May 1995
81. M. Schmitz-Niederau, M. Schütze
    Verhalten von Oxidschichten auf Ti50Al und Ti50Al2Nb unter mechanischer Belastung des Substrats bei 900°C
    DGM-Hauptversammlung 1995, Bochum, 6.-9. June 1995
82. M. Schütze, C. Lang
    Mechanismen der Anfangsoxidation von TiAl
    DGM-Hauptversammlung 1995, Bochum, 6.-9. June 1995
83. M. Schütze
    Werkstoffverhalten bei hohen Temperaturen unter gleichzeitiger Korrosion und mechanischer Beanspruchung
    Kolloquium Werkstofftechnik/Oberflächentechnik der Universität Siegen, 5. July 1995
84. M. Schütze
    The Influence of Stresses on the Development of Sulfide Scales
    Gordon Research Conference 1995 on High-Temperature Corrosion, New London/USA, 16.-22. July 1995
85. S. Melsheimer, H. Fietzek, V. Kolarik, A. Rahmel, M. Schütze
    Oxidation of TiSi2 und MoSi2: Similarities and Dissimilarities
    Gordon Research Conference 1995 on High-Temperature Corrosion, New London/USA, 16.-22. July 1995
86. J.P.T. Vossen, M. Schütze
    Interaction of Oxidation and Mechanical Stresses on Stainless Steels
    Projekt-Kolloquium Human Capital and Mobility, Universität Toulouse/F, 1. September 1995
87. M. Schütze
    The Oxidation of TiAl - Initial Stages and the Effect of Stresses
    Materials Seminar of the Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge/USA, 7. September 1995
88. M. Schütze, B. Glaser
    The Influence of Cl-Containing Atmospheres on Creep Crack Growth at 800ºC
    2nd Int. Conf. Heat-Resistant Materials, Gatlinburg/USA, 11.-14. September 1995
89. K. Rahts, M. Schorr, M. Schütze, M. Schmitz-Niederau
    Präparationsmethoden und lichtmikroskopische Darstellung von Oxidschichten und Gefüge an TiAl-Legierungen aus Hochtemperaturversuchen
    EUROMET '95, Friedrichshafen, 13.-15. September 1995
90. M. Schütze, B. Glaser
    Einfluß von Chlor auf das Rißwachstum in Stählen und Nickelbasis-Legierungen bei 800°C
    DECHEMA/DGM/VDEh-Gemeinschaftsausschuß Hochtemperaturkorrosion, Werdohl, 17. October 1995
91. K. Bundschuh, M. Schütze
    The Characterization of the Environmental Resistance of Advanced Materials Above 1500°C
    2nd European Workshop on Thermal Protection Systems, Stuttgart, 23.-27. October 1995
92. K. Bundschuh, S. Melsheimer, M. Schütze
    Hochtemperaturoxidation von MoSi2 als Beschichtungswerkstoff auf SiC-Keramik DKG-Symposium Keramische Schichten, Koblenz, 8.-9.11.1995
93. M. Schütze
    Titanaluminide - eine neue Werkstoffgruppe für Hochtemperaturanwendungen unter dem Gesichtspunkt der Oxidationseigenschaften
    Jahreskolloquium des KWI, Frankfurt am Main, 30. November 1995
94. M. Schütze, M. Schulte
    Einfluß von Spannungen in Sulfidschichten auf das Sulfidierungsverhalten von Stählen
    Werkstoffausschuß des VDEh, Düsseldorf, 6. December 1995
95. C. Lang, M. Schütze
    The Initial Stages of TiAl Oxidation
    EFC-Workshop on Oxidation of Intermetallics, Frankfurt/M. 18.-19. January 1996
96. M. Schütze
    Additional Aspects of TiAl-Oxidation
    EFC-Workshop on Oxidation of Intermetallics, Frankfurt/M. 18.-19. January 1996
97. S. Melsheimer, A. Rahmel, M. Schütze
    The Oxidation Behaviour of MoSi2 and TiSi2
    EFC-Workshop on Oxidation of Intermetallics, Frankfurt/M. 18.-19. January 1996
98. J.P.T. Vossen, M. Schütze
    The Interaction of Oxidation and Mechanical Stresses on 9-12% Cr Containing Stainless Steel
    HCM-Meeting on High Temperate Corrosion Testing, Madrid/E, 26. January 1996
99. C. Bruns, M. Schütze
    Untersuchungen zur Haftfestigkeit von Oxidschichten
    DFG-Berichtskolloquium "Hochtemperaturkorrosion", Bonn ,15.-16. April 1996
100. W. Przybilla, M. Schütze
     Untersuchungen zur in situ Erfassung von Eigenspannungen in wachsenden Oxidschichten
     DFG-Berichtskolloquium "Hochtemperaturkorrosion", Bonn ,15.-16. April 1996
101. C. Lang, M. Schütze
     The Role of the Initial Steps of Oxidation for High Temperature Oxidation Resistance
     Int. Workshop on γ-Titanium Aluminides, Birmingham/GB, 30. April - 3. May 1996
102. M. Nöth, M. Schütze
     Untersuchungen zur Erhöhung der Hochtemperaturkorrosionsbeständigkeit metallischer Werkstoffe in H2S-Umgebungen
     Fachtagung der GfKORR, Dresden 7.-9. May 1996
103. J.P.T. Vossen, M. Schütze
     The Limits of the Oxidation Resistance of Modern Heat-resistant Steels with and without Superimposed Mechanical Load
     4e Colloque International sur la Corrosion et la Protection des Materiaux à Haute Température, Les Embiez/F, 20.-24. May 1996
104. M. Hald, M. Schütze
     Isothermal Oxidation of P/M-TiAl Alloys
     4e Colloque International sur la Corrosion et la Protection des Materiaux à Haute Température, Les Embiez/F, 20.-24. May 1996
105. C. Lang, M. Schütze
     Die Mechanismen der Anfangsoxidation und ihre Auswirkungen auf die Oxidationsbeständigkeit von Titanaluminiden
     Werkstoffwoche 96, Stuttgart, 28.-31. May 1996
106. M. Nöth, J.P.T. Vossen, M. Schütze
     Sulfidation Behaviour of Fe-aluminides
     CEASI-Meeting on Fe-aluminides, Göteborg/S, 8. June 1996
107. M. Schütze, M. Hald, C. Lang, S. Melsheimer, A. Rahmel
     Intermetallic Disilicides and Titanium Aluminides - A New Class of Structural High Temperature Materials under the Aspect of their High Temperature Oxidation Resistance
     14th IUPAC Conference on Chemical Thermodynamics, Osaka/J, 25.-30. August 1996
108. M. Schütze
     Investigations into Reducing Material Attack by Sulphidation in low pO2/H2S-containing Atmospheres
     Seminar of Sumitomo Advanced Technology Research Laboratories
     Amagasaki/J, 29. August 1996
109. M. Schütze
     Oxidation Resistance of Several Superalloys (SX, DS, coated and uncoated) under Isothermal conditions and under Conditions including Temperature Changes and Stresses
     Seminar of Hitachi Research Laboratory, Hitachi-shi/J, 30. August 1996
110. C. Lang, M. Schütze
     TEM Studies of the Mechanisms in the Early Stages of TiAl Oxidation
     3rd Int. conf. on the Microscopy of Oxidation, Cambridge/GB, 16.-18. September 1996
111. M. Schütze
     Intermetallic Titanium Aluminides - Importance of Oxidation Resistance for Applications
     CORROSION '96 - Theory and Practice, Danzig/PL, 17.-20. September 1996
112. K. Rahts, M. Nöth, M. Schulte, M. Schorr, P. Gawenda, M. Schütze
     Untersuchungen an Sulfidschichten verschiedener Hochtemperaturwerkstoffe aus thermischer Beanspruchung in H2S-haltiger Atmosphäre
     Metallographie-Tagung 1996, Hamburg 18.-20. September 1996
113. J.P.T. Vossen, M. Schütze
     Limits for the Recovery of Chromium Oxide Scales on Heat-Resistant Stainless Steels under Isothermal Oxidation in Air with and without Superimposed Mechanical Load at 650°ºC
     International Conference on Corrosion - Deformation Interactions, Nizza/F, 24.-26. September 1996
114. M. Schütze, C. Bruns
     Stresses and Adhesion of Surface Scales
     International Conference on Corrosion - Deformation Interactions, Nizza/F, 24.-26. September 1996
115. J.P.T. Vossen, M. Schütze
     Isothermal and Thermocyclic Oxidation Behaviour of Heat-Resistant Chromium-Containing Steels in Air at 650ºC
     EUROCORR '96, Nizza/F, 24.-26. September 1996
116. C. Lang, M. Hald, M. Schütze
     Investigations into the Effect of Initial Oxidation, Alloying and Chlorine Pre-Treatment for Improving Oxidation Resistance of TiAl,
     Int. Symp. on Titanium Aluminide and other intermetallic Compounds, Paris/F, 15.-17. October 1996
117. M. Schütze, J.P.T. Vossen
     Oxidationsverhalten von 9Cr-Stählen in Luft unter isothermer, thermozyklischer und Zeitstandbeanspruchung bei 650ºC
     DGM/DECHEMA/VDEh-Gemeinschaftsausschuß "Hochtemperaturkorrosion", Jülich, 17. October 1996
118. M. Schütze
     Improving the High Temperature Oxidation Resistance of TiAl-based Materials
     CEASI-Meeting, Paris/F, 15. November 1996
119. M. Schütze
     The Role of the Initial Stages of Oxidation and of the Chlorine Effect in the Oxidation Resistance of TiAl-Alloys
     Materials Science Seminar of the University of New South Wales, Sydney/AUS, 21. November 1996
120. M. Schütze, M. Nöth
     The Sulfidation Resistance of Several Fe- und Ni-Base Alloys and of two Intermetallics in Atmospheres Containing H2S at 400-700ºC
     13th International Corrosion Conference, Melbourne/AUS, 25. November 1996
121. M. Schütze, M. Hald, C. Lang
     Die Rolle der Anfangsoxidation und des Chloreffekts für die Oxidationsbeständigkeit von TiAl-Legierungen
     DGM-Fachausschuß "Intermetallische Phasen", Düsseldorf, 3. December 1996
122. C. Lang, M. Hald, M. Nöth, C. Bruns, M. Schütze
     Titanaluminide als Struktur- und Beschichtungswerkstoff für hohe Temperaturen Internationale Informations- und Partnerbörse für Forschungs- und Technologietransferkooperationen, Wien/A, 3.-4. December 1996
123. M. Schütze
     Oxidation bei gleichzeitiger mechanischer Beanspruchung und Temperaturwechseln
     DGM-Fortbildungsveranstaltung "Hochtemperaturkorrosion", Düsseldorf, 5. December 1996
124. M. Schütze
     Das Oxidationsverhalten von Hochtemperaturwerkstoffen bei gleichzeitiger mechanischer Belastung
     Kolloquium des Instituts für Werkstoffe der Energietechnik, Jülich, 12. December 1996
125. M. Schütze, C. Schwalm
     Werkstoffe für den Einsatz in chlorhaltigen Umgebungen bei hohen Temperaturen DECHEMA-Arbeitsausschuß Prozeßgerechte Gestaltung und Fertigung von Apparaten, Gustavsburg, 25. February 1997
126. M. Schütze
     Neuere Werkstoffprobleme im Apparate- und Anlagenbau - z.B. mikrobiologisch beeinflußte Korrosion und Hochtemperatur-H2S-Korrosion
     Kolloquium des Max-Planck-Instituts für Eisenforschung, Düsseldorf, 5. March 1997
127. C. Lang
     Mechanismen der Anfangsoxidation von Titanaluminiden
     Seminar des Instituts für Eisenhüttenkunde, RWTH, 15. April 1997
128. A. Jeutter, M. Schütze
     The Influence of HCl-containing Atmospheres on High Temperature Corrosion of Coated and Uncoated Nickel-Base Superalloys under Complex Loading Conditions
     EUROMAT '97, Maastricht/NL, 21.-23. April 1997
129. M. Schütze, M. Hald
     Improvement of the Oxidation Resistance of TiAl Alloys by Using the Chlorine Effect
     4th Int. Conf. on High Temperature Intermetallics, San Diego/USA, 28. April - 1. May 1997
130. K. Bundschuh, M. Schütze
     Development of a Testing Method for the Characterization of the Environmental Resistance of Advanced Materials at or above 1500°C
     Final Workshop COST 510. Smolenice/Slowakei, 1.-4. June 1997
131. K. Bundschuh, M. Schütze, C. Müller, P. Greil, W. Heitzer
     Selection of Materials for Use at Temperatures Above 1500°C in Oxidizing Atmospheres
     ECERS '97, Paris/F, 22.-26. June 1997
132. W. Fürbeth, M. Schütze
     Korrosion und Korrosionsschutz
     Wirtschaftskontakt-Tag Oberflächenbehandlung der IHK-Technologieberatung Darmstadt, 15. July 1997
133. M. Hald, M. Schütze
     Mechanisms of the Chlorine Effect Improving the Oxidation Resistance of TiAl-Alloys
     Gordon Research Conference on Dry Corrosion, New London/USA, 20.-25. July 1997
134. K. Rahts, M. Schorr, Ch. Schwalm, M. Schütze
     Untersuchungen über den Einfluß von Chlor bei der Hochtemperaturoxidation
     Metallographietagung 1997, Karlsruhe, 10.-12. September 1997
135. C. Lang, M. Schütze
     Werkstoffe für Temperaturen oberhalb von 1500°C und Verfahren zur Charakterisierung von deren Oxidationsbeständigkeit
     Forschungsforum 1997 des BMBF, Leipzig, 16.-20. September 1997
136. M. Schütze, M. Nöth
     Materials for High Temperature Sulfidation Resistant Coatings
     EUROCORR '97, Trondheim/N, 22.-25. September 1997
137. M. Schütze, K. Bundschuh
     Oxidation Resistance of High Temperature Materials and Coatings for Use at Temperatures of 1400°C and Higher
     Polish-Japanese Symposium Environmental Effects on High Technology Materials, Zakopane/PL, 12.-16. October 1997
138. H. Kalfa, K. Schroeder, M. Schütze
     Korrosionsforschung oder Korrosionsmanagement? Korrosionsforschung für Zukunftstechnologien - Umwelttechnologie, Jahrestagung 1997 der GfKORR, Frankfurt am Main, 22. October 1997
139. M. Schütze, W. Przybilla
     The Role of Stresses in Oxidation and Shape Stability
     Int. Conf. on Metal-Supported Automotive Catalytic Converters, Wuppertal, 27.-28. October 1997
140. M. Schütze
     Mechanische Aspekte der Hochtemperaturkorrosion
     Seminar des Instituts für Festkörper- und Werkstofforschung, Dresden, 5. December 1997
141. M. Schütze, M. Nöth
     Protective Coatings for High Temperatures and High Sulfur-Low Oxygen Environments
     NACE Corrosion '98, San Diego/USA, 22.-27. March 1998
142. C. Lang, M. Schütze
     Untersuchungen zur Anfangsoxidation von TiAl
     DFG-Kolloquium "Hochtemperaturkorrosion", Bad Honnef, 30.-31. March 1998
143. S. Melsheimer, M. Schütze
     Oxidationsverhalten der Disilizide MoSi2 und TiSi2
     DFG-Kolloquium "Hochtemperaturkorrosion", Bad Honnef, 30.-31. March 1998
144. M. Schmitz-Niederau, C. Bruns, W. Przybilla, M. Schütze
     Versagen von schützenden Oxidschichten als Folge von externen Spannungen und von intrinsischen Wachstumsspannungen
     DFG-Kolloquium "Hochtemperaturkorrosion", Bad Honnef, 30.-31. March 1998
145. M. Schütze
     Mechanical Interactions in Oxide Scales
     193rd Meeting of The Electrochemical Society, San Diego/USA, 3.-8. May 1998
146. M. Schütze
     Data and Models Describing the Cracking and Healing Behaviour of TGO
     Int. Workshop on Thermal Barrier Coatings, Irsee, 17.-20. May 1998
147. M. Schütze
     Neuere Entwicklungen zur Lösung der Korrosionsprobleme insbesondere unter reduzierenden Atmosphären
     Vortragsreihe "Vergasung und Verbrennung von Abfällen und fossilen Brennstoffen", DECHEMA-Jahrestagungen '98, Wiesbaden 26.-28. May 1998
148. M. Schütze
     Intermetallische TiAl-Legierungen als zukünftige Hochtemperaturleichtbauwerkstoffe - Verhalten unter Komplexbeanspruchungen
     Festkolloquium anläßlich der 60. Geburtstage der Herren Professoren H.-G. Sockel und B. Reppich, Universität Erlangen-Nürnberg, 29. May 1998
149. W. Przybilla, M. Schütze
     Monitoring stress relaxation in growing oxide scales via acoustic emission analysis
     23rd European Conference on Acoustic Emission Testing, Wien/A, 6.-8. May 1998
150. M. Hald, C. Lang, G. Schumacher, M. Schütze
     The Microalloying Effect in the Oxidation of TiAl Alloys
     EUROCORR '98, Utrecht/NL, 27. September - 1. October 1998
151. A. Jeutter, M. Schütze
     High Temperature Corrosion Resistance of Gas Turbine Materials and Coatings under the Influence of Cl-Contaminations
     6th Liège Conference on Materials for Advanced Power Engineering, Lüttich/B, 5.-7. October 1998
152. C. Müller, K. Bundschuh, P. Greil, M. Schütze, W. Heider
     SiOC/MoSi2-Oxidationsschutzbeschichtungen für RSiC zum Einsatz in HT-Prüfvorrichtungen
     Werkstoffwoche 1998, München, 12.-15. October 1998
153. H. Kalfa, K. Schroeder, M. Schütze
     Neue Werkstoffkonzepte für innovative Umwelttechnologien
     Werkstoffwoche 1998, München, 12.-15. October 1998
154. M. Schütze
     Metal Dusting an einer Schraubenretorte
     DECHEMA/DGM/VDEh-Gemeinschaftsausschuß "Hochtemperaturkorrosion", Düsseldorf, 22. October 1998
155. M. Schütze
     Werkstoffverhalten bei Wechselwirkung von Hochtemperaturkorrosion und mechanischer Belastung
     Krupp VDM-IKS Seminar "Hochtemperaturkorrosion in der Prozeßtechnik", Dresden, 28. October 1998
156. M. Schütze, C. Schwalm
     Werkstoffe für den Einsatz in chlorhaltigen Umgebungen bei hohen Temperaturen
     DECHEMA-Arbeitsausschuß Prozeßgerechte Gestaltung und Fertigung von Apparaten, Frankfurt am Main, 1. December 1998
157. M. Schütze, A. Zeller
     Untersuchungen zum Einfluß von wasserdampfhaltigen Umgebungen auf die Hochtemperaturfestigkeit von Titanaluminidwerkstoffen für den verfahrenstechnischen Maschinen- und Anlagenbau
     DECHEMA-Arbeitsausschuß Prozeßgerechte Gestaltung und Fertigung von Apparaten, Frankfurt am Main, 1. December 1998
158. A. Ralison, F. Dettenwanger, M. Schütze
     Cyclic Oxidation of Orthorhombic TiAl Alloys
     EFC-Workshop Cyclic Oxidation as a Tool for High Temperature Materials Characterization, Frankfurt, 25.-26. February 1999
159. T. Weber, M Schütze
     Behaviour of Protective Coatings against Sulfidation under Cyclic Conditions
     EFC-Workshop Cyclic Oxidation as a Tool for High Temperature Materials Characterization, Frankfurt, 25.-26. February 1999
160. O. Lensch, F. Dettenwanger, M. Schütze, R. Rix, V. Güther, R. Scholl
     The Influence of Fe-Impurities on the Oxidation Behaviour of MoSi2-based Composites at 1600°C
     1999 TMS Annual Meeting, San Diego/USA, 28. February - 4. March 1999
161. H. Echsler, M. Schütze
     Investigation of Damage Mechanisms in Thermal Barrier Coatings by Acoustic Emission
     1999 TMS Annual Meeting, San Diego/USA, 28. February - 4. March 1999
162. A. Zeller, F. Dettenwanger, M. Schütze
     Influence of Water Vapor on the Creep Behaviour of TiAl
     2nd Int. Symp. on Gamma Titanium Aluminides, San Diego/USA, 28. February - 4. March 1999
163. M. Schütze
     Deformation Models and Oxide Scale Properties
     Nippon Steel Research Seminar, Shintomi Futtsu/J, 24. March 1999
164. M. Schütze, A. Zeller
     Einfluß von Wasserdampf auf die Kriech- und Oxidationseigenschaften von Titanaluminiden
     DGM/DECHEMA/GfKORR/VDEh-Gemeinschaftsausschuß "Hochtemperaturkorrosion", Jülich, 22. April 1999
165. T. Weber, M. Schütze
     Development of Protective Coatings for Reducing Environments at High Temperatures
     CORROSION 99, San Antonio/USA, 25.-30. April 1999
166. G. Schuhmacher, F. Dettenwanger, U. Hornauer, E. Richter, M. Schütze, E. Wieser
     The Microalloying Effect of Ion-Implanted Phosphorus on the Oxidation Behaviour of Intermetallic TiAl
     Gordon Research Conference on Corrosion-Dry, New London (NH)/USA, 18.-23. July 1999
167. U. Hornauer, G. Schuhmacher, H. Reuther, W. Matz, E. Wieser, E. Richter,
     M. Schütze
     Influence of Silicon Ion-Implantation on the Microstructure and Oxidation Kinetics of Ti50Al
     Gordon Research Conference on Corrosion-Dry, New London (NH)/USA, 18.-23. July 1999
168. T. Weber, M. Schütze
     Protective Coatings for Reducing and Sulfidizing Environments
     EUROCORR'99, Aachen, 30. August - 2. September 1999
169. R. Bender, M. Schütze
     Corrosion Behaviour of Several Commercial Alloys in Oxidizing-Chloridizing Gas Mixtures at 650 to 1000°C
     EUROCORR'99, Aachen, 30. August - 2. September 1999
170. U.J. Brand, H.-E. Bühler, P. Karduk, S. Köhler, E. Berghof-Hasselbächer, M. Schütze
     Investigations of a Valve Damaged by Oxidation and Carburisation
     EUROCORR'99, Aachen, 30. August - 2. September 1999
171. F. Dettenwanger, M. Schütze
     Isothermal Oxidation of α2-Ti3Al between 800 and 1000°C
     EUROCORR'99, Aachen, 30. August - 2. September 1999
172. S. Lohfeld, F. Dettenwanger, M. Schütze, R. Rix, V. Güther, R. Scholl
     Influence of Second Phase Particles on the Oxidation Behaviour of MoSi2 at
     1600°C in Air
     EUROCORR'99, Aachen, 30. August - 2. September 1999
173. G. Schuhmacher, F. Dettenwanger, M. Schütze, J.D. Sunderkötter, M.F. Stroosnijder
     TEM-Investigations of Oxidized Y-implanted PM Chromium
     EUROCORR'99, Aachen, 30. August - 2. September 1999
174. Zeller, F. Dettenwanger, M. Schütze
     Influence of Water Vapour on the Oxidation Behaviour of TiAl at 700 and 750°C
     EUROCORR'99, Aachen, 30. August - 2. September 1999
175. G. Schuhmacher, F. Dettenwanger, M. Schütze
     Investigations of the Microalloying Effect of Chlorine in the Oxidation of TiAl Alloys
     Microscopy of Oxidation, Cambridge/GB, 22.-23. September 1999
176. T. Weber, M. Schütze
     Protective Coatings for Reducing Sulfidizing Environments at High Temperatures
     China International Corrosion Control Conference '99 (CICCC'99), Beijing/VR, 26.-28. October 1999
177. M. Schütze
     Hochtemperaturkorrosion als lebensdauerbestimmender Faktor in modernen Hochtemperaturtechnologien
     Mitgliederversammlung der GfKORR, Frankfurt am Main, 10. November 1999
178. K. Bundschuh, S. Lohfeld, M. Schütze
     Oxidationsverhalten von MoSi2-Basis-Werkstoffen
     DGM-Fachausschuß Intermetallische Phasen, Düsseldorf, 17. November 1999
179. M. Schütze, T. Weber
     Korrosionsbeständige Schutzschichten für den Hochtemperatureinsatz in reduzierenden H2S-haltigen Umgebungen
     DECHEMA Arbeitsausschuß Prozeßgerechte Gestaltung und Fertigung von Apparaten, Frankfurt am Main, 27. January 2000
180. S. Lohfeld, M. Schütze
     Einfluß von Zweitphasen auf das Oxidationsverhalten von Molybdändisiliziden bei hohen Temperaturen
     DGM/DECHEMA/GfKORR/VDEh-Gemeinschaftsausschuß Hochtemperaturkorrosion, Frankfurt am Main, 2. February 2000
181. M. Schütze
     Neue Konzepte zur Erhöhung der Hochtemperaturkorrosionsbeständigkeit
     512. DECHEMA-Kolloquium "Werkstoffe in der Hochtemperatur-Prozeßtechnik - Probleme und Lösungen", Frankfurt am Main, 17. February 2000
182. M. Schütze
     Parameters Affecting the life-time of Protective Coatings
     S+C Workshop "Surface engineering for High Substrate materials, Lindlar, 23. February 2000
183. R. Bender, M. Schütze
     Oxidation Behaviour of Several Commercial Alloys in Chlorine-Containing High Temperature Environments,
     NACE - Corrosion 2000, Orlando/USA, 26.-31. March 2000
184. H. Echsler, M. Schütze
     Study of the Deformation Model of the Oxide Scale in the Hot Rolling Process,
     Nippon Steel Colloquium, Futtsu City/J, 27. April 2000
185. M. Schütze
     New Material Systems for High Temperature Process Technology
     ProEuMach 2000, Clausthal, 20.-22. July 2000
186. M. Schütze, A. Ralison, F. Dettenwanger
     Oxidation in Air and Hot Corrosion of Orthorhomic Ti2AlNb Alloys
     EUROCORR 2000, London/GB, 10.-14. September 2000
187. M. Schütze, S. Lohfeld, F. Dettenwanger
     Investigation of the Oxidation Behaviour of Selected MoSi2 Based Composites at High Temperatures
     EUROCORR 2000, London/GB, 10.-14. September 2000
188. M. Schütze, H. Echsler
     Investigation of Bond Coat Oxidation and of Mechanical Behaviour of Ceramic Top Coats for Lifetime Prediction of TBC Systems
     EUROCORR 2000, London/GB, 10.-14. September 2000
189. W. Fürbeth, K. Jüttner, M. Schütze
     Development of New Corrosion Resistent Coatings Using Modern Electrochemical Techniques
     ISE 51th Meeting, Warschau/PL., 3.-8. September 2000
190. M. Schütze, S. Ito, W. Przybilla, H. Echsler, C. Bruns
     Test Methods and Data on the Mechanical Properties of Protective Oxide Scales
     Int. Symp. High Temperature Corrosion and Protection 2000, Rusutsu/J, 17.-22. September 2000
191. M. Schütze
     The Halogen Effect in the Oxidation of Intermetallic Titanium Aluminides
     Int. Symp. Oxidation and Corrosion of Advanced Materials and Related Phenomena, Sendai/J, 25.-26. September 2000
192. M. Schütze
     Modelling of Scale Failure
     ERC-Conference "Surface Layers - A Playground for Scientists and Engineers"
     Aqua freda di Maratea/I, 30. September - 5. October 2000
193. M. Schütze, F. Dettenwanger, G. Schumacher
     Hochtemperaturoxidationsschutz für TiAl-Legierungen durch oberflächennahe Dotierung mit Mikrolegierungselementen
     FDS/FVV/DECHEMA/GfKORR-Workshop "Schutzschichten für Hochtemperaturanwendungen", Frankfurt am Main, 26. October 2000
194. B. Aumüller, T. Weber, M. Schütze
     Verfahrenstechnische Aspekte und Schutzwirkung von thermisch gespritzten TiAl-Schutzschichten für reduzierende Atmosphären
     FDS/FVV/DECHEMA/GfKORR-Workshop "Schutzschichten für Hochtemperaturanwendungen", Frankfurt am Main, 26. October 2000
195. D. Renusch
     Application of acoustic emission measurements to high temperature corrosion
     Sitzung des DGZfP-Fachausschusses "Schallemissionsprüfverfahren", Frankfurt am Main, 26. October 2000
196. D. Renusch, M. Schütze
     Mechanical failure of thermal barrier coatings - four point bending tests
     3. Jülicher Werkstoffsymposium "Thermal Barrier Coatings for Gas Turbines", Jülich, 2.-3. November 2000
197. M. Schütze
     Oxidation bei gleichzeitiger mechanischer Beanspruchung
     DGM-Seminar "Hochtemperaturkorrosion", Jülich, 8.-10. November 2000
198. T. Weber, C. Rosado, R. Bender, M. Schütze
     Schutzschichten für extreme Hochtemperatur-Atmosphären (H2S, Cl2, Metal Dusting)
     Karl-Winnacker-Institut der DECHEMA e.V., Kolloquium Oberflächen und Schichten, Frankfurt am Main, 30. November 2000
199. D. Renusch, H. Echsler, M. Schütze
     New Approach to the Understanding of Failure and Life-time
     Prediction of Thermal Barrier Coating-Systems
     Karl-Winnacker-Institut der DECHEMA e.V., Kolloquium Oberflächen und Schichten, Frankfurt am Main, 30. November 2000
200. F. Dettenwanger, G. Schumacher, M. Schütze
     Erhöhung der Oxidationsbeständigkeit von Titanaluminiden durch Mikrolegieren der Oberfläche
     Karl-Winnacker-Institut der DECHEMA e.V., Kolloquium Oberflächen und Schichten, Frankfurt am Main, 30. November 2000
201. M. Schütze
     Erhöhung der Oxidationsbeständigkeit von Titanaluminidlegierungen durch den
     Halogeneffekt
     Werkstoffsymposium des MPI für Eisenforschung "Korrosion und Grenzflächen", Düsseldorf, 7.-8. December 2000
202. F. Dettenwanger, M. Schorr, M. Schütze
     The influence of subsurface zone depletion on long-term oxidation resistance of 9Cr steels
     EFC-Workshop Life Time Modelling of High Temperature Corrosion Processes
     DECHEMA e.V., Frankfurt am Main, 22.-23. February 2001
203. D. Renusch, H. Echsler, M. Schütze
     New approaches to the understanding of failure and life-time prediction of thermal barrier coating-systems
     EFC-Workshop Life Time Modelling of High Temperature Corrosion Processes
     DECHEMA e.V., Frankfurt am Main, 22.-23. February 2001
204. M. Schütze, F. Dettenwanger, M. Schorr, M. Röhrig, T. Weber
     The influence of Si, W, and water vapour on the oxidation behaviour of 9Cr steels
     NACE-CORROSION 2001, Houston/USA, 11.-16. March 2001
205. F. Dettenwanger, S. Lohfeld, M. Schütze, V. Güther, R. Rix. R. Scholl
     Investigation of the oxidation behaviour of lately developed MoSi2 based composites
     199th Meeting of the Electrochemical Society, Washington/USA, 25.-29. March 2001
206. M. Schütze, R. Bender
     Hochtemperaturkorrosion in chlorhaltigen Atmosphären - Leistungsfähigkeit metallischer Werkstoffe und Möglichkeiten zur Erhöhung der Beständigkeit
     5. Dresdener Korrosionsschutztage, Dresden, 4.-6. April 2001
207. M. Schütze
     The role of oxide growth stresses and mechanical stresses for scale integrity
     Gordon Research Conference on High Temperature Corrosion, New London/USA, 22.-27. July 2001
208. F. Dettenwanger, V. Gauthier, H.-E. Zschau, D. Renusch, M. Schütze
     Oxidation protection of γ-TiAl by aluminizing and HF-treatment
     Gordon Research Conference on High Temperature Corrosion, New London/USA, 22.-27. July 2001
209. A. Ralison, F. Dettenwanger, M. Schütze
     Oxidation behaviour of the orthorhombic alloy Ti-23Al-25Nb-0.35Si at 800°C in air, oxygen and nitrogen
     Gordon Research Conference on High Temperature Corrosion, New London/USA, 22.-27. July 2001
210. E. Berghof-Hasselbächer, H. Echsler, P. Gawenda, M. Schorr, M. Schütze
     Zeit- und temperaturabhängige Entwicklung von physikalischen Defekten in Wärmedämmschichtsystemen
     Metallographie Tagung, Neu-Ulm, 19.-21. September 2001
211. F. Dettenwanger, C. Rosado, M. Schütze
     Development of coating systems against metal dusting attack
     International Workshop on Metal Dusting, Chicago/USA, 26.-28. September 2001
212. C. Rosado, F. Dettenwanger, M. Schütze
     Protection of steels against metal dusting
     EUROCORR 2001, Riva del Garda/I, 30. September - 4. October 2001
213. T. Weber, M. Schütze
     Coatings against high temperature H2S-corrosion
     EUROCORR 2001, Riva del Garda/I, 30. September - 4. October 2001
214. H.-E. Zschau
     Ion beam analysis as a tool in high temperature corrosion research
     EUROCORR 2001, Riva del Garda/I, 30. September - 4. October 2001
215. R. Bender, M. Schütze
     High temperature corrosion of several Fe- and Ni-base alloys in oxidizing/chloridizing atmospheres
     EUROCORR 2001, Riva del Garda/I, 30. September - 4. October 2001
216. T. Weber, M. Schütze
     Hochtemperaturschutzschichten auf Apparatebaustählen für reduzierend-sulfidierende Bedingungen
     DGM/VDEh/DECHEMA/GfKORR-Gemeinschaftsausschuß Hochtemperaturkorrosion, Jülich, 25. October 2001
217. R. Bender, M. Schütze
     Die Rolle verschiedener Legierungselemente in metallischen Werkstoffen für die Beständigkeit gegen Hochtemperaturkorrosion in Cl-haltigen Umgebungen
     DGM/VDEh/DECHEMA/GfKORR-Gemeinschaftsausschuß Hochtemperaturkorrosion, Jülich, 25. October 2001
218. M. Schütze, C. Rosado, F. Dettenwanger
     Recent developments in the protection of steels against metal dusting attack
     Stainless Steel World 2001, The Hague/NL, 13.-15. November 2001
219. M. Schütze, D. Renusch, M. Schorr
     The oxidation behaviour of ferritic-martensitic 9% Cr steels in H20 containing environments
     2002 TMS Annual Meeting and Exhibition, Seattle/USA, 17.-21. February 2002
220. M. Schütze, H. Echsler, D. Renusch
     The role of alumina TGO scales for the life-time of TBC systems
     Int. Max-Planck-Symp. Science and Technology of Alumina, Ringberg, 17.-22. March 2002
221. M. Schütze, C. Rosado, T. Weber
     Development of coatings for environments with high sulfur and/or carbon activities at low oxygen potentials
     NACE-CORROSION 2002, Denver/USA, 7.-11. April 2002
222. H.-Q. Nguyen, W. Fürbeth, M. Schütze
     Entwicklung neuartiger Korrosionsschutzschichten für Metalle auf der Basis chemischer Nanotechnologie
     GVC/DECHEMA-Jahrestagungen 2002, Wiesbaden, 11.-13. June 2002
223. H. Echsler, D. Renusch, M. Schütze
     Kinetics of the evolution of physical defects in the TGO and its Vicinity for life time prediction of TBC systems
     TurboMat, Bonn, 17.-19. June 2002
224. H.-E. Zschau, V. Gauthier, M. Schütze, H. Baumann, K. Bethge
     Investigation of the fluourine microalloying effect in the oxidation of TiAl at 900°C in Air
     TurboMat, Bonn, 17.-19. June 2002
225. V. Gauthier, M. Schütze
     Oxidation behaviour of γ-TiAl coated with zirconia thermal barriers
     TurboMat, Bonn, 17.-19. June 2002
226. A. Donchev, M. Schütze
     Thermodynamic considerations on the halogen effect for the improvement of the oxidation resistance of TiAl alloys
     TurboMat, Bonn, 17.-19. June 2002
227. D. Renusch, H. Echsler, M. Schütze
     Life time modelling of APS-TBC by using acoustic emission analysis
     TurboMat, Bonn, 17.-19. June 2002
228. M. Schütze
     High temperature corrosion - a materials challenge in modern high temperature technology
     KOROZJA 2002, Krakau/PL, 17.-21. June 2002
229. A. Ralison, M. Schütze
     Investigation of the microstructures of the oxide scales and the metal subsurface zones of orthorhombic titanium aluminides after oxidation at 550-1000°C
     5th Int. Conf. Microscopy of Oxidation, Limerick/IRL, 26.-28. August 2002
230. M. Schütze, D. Renusch, M. Schorr
     The role of alloy composition, environment and stresses for the oxidation resistance of modern 9-12 % Cr steels for fossil power stations
     HTCERS 2002, Angra dos Reis/BR, 1.-4. September 2002
231. M. Schütze, A. Donchev, V. Gauthier, H.-E. Zschau
     Improvement of the oxidation resistance of intermetallic TiAl alloys by the halogen effect
     15th International Corrosion Congress, Granada/E, 22.-27. September 2002
232. M. Schütze
     Recent developments in the high temperature corrosion protection of structural materials
     15th International Corrosion Congress, Granada/E, 22.-27. September 2002
233. M. Schütze, D. Renusch, M. Schorr
     Parameters determining the oxidation resistance of 9-12% Cr steels
     28th MPA Seminar "Safety and Reliability in Energy Technology", Stuttgart, 10.-11. October 2002
234. M. Schütze
     Recent developments in high temperature corrosion protection coatings for chemical and petrochemical industries
     2nd China International Corrosion Control Conference, Beijing, 5.-8. November 2002
235. M. Schütze
     Novel aspects in the surface protection of gas turbine materials
     NIMR Congress, Noordwijkerhout/NL, 16.-17. December 2002
236. M. Schütze; A. Donchev, H.-E. Zschau
     Oxidationsschutz von TiAl-Legierungen durch Ionenimplantation mit Halogenen
     DGM-Fachausschuß Intermetallische Phasen, Düsseldorf, 15.-16. January 2003
237. W. Fürbeth, H.Q. Nguyen, M. Schütze
     Nanopulver-Schichten als Korrosionsschutz für Leichtmetallegierungen
     KKF-Kolloquium "Problemlösungen für den metallischen Leichtbau", Frankfurt am Main, 28. January 2003
238. A. Donchev, M. Schütze, E. Richter, U. Hornauer, E. Wieser
     Erhöhung der Oxidationsbeständigkeit von TiAl-Legierungen durch Ionenimplantation
     KKF-Kolloquium "Problemlösungen für den metallischen Leichtbau", Frankfurt am Main, 28. January 2003
239. C. Rosado, M. Schütze
     Influence of temperature on the protective behaviour of newly developed coatings against metal dusting
     EFC-Workshop "Metal Dusting, Carburisation and Nitridation", Frankfurt am Main, 30.-31. January 2003
240. M. Schütze
     Design mit neuen Werkstoffen - Hochtemperaturanwendungen
     21. Konstruktionssymposium der DECHEMA "Innovative Lösungen für die Apparatetechnik", Frankfurt am Main, 10. February 2003
241. M. Schütze
     Korrosion
     MTU-Weiterbildung "Neue Werkstoffe und Bauweisen", München, 8. May 2003
242. M. Schütze
     The role of the alloying elements for the resistance against HAT chlorine corrosion
     ACHEMA 2003, Frankfurt am Main, 19.-24. May 2003
243. T. Weber, M. Schütze
     Development of protective coatings for structural steels used in high temperature sulfidizing and metal dusting environments of petrochemical processes
     ACHEMA 2003, Frankfurt am Main, 19.-24. May 2003
244. A. Littner, M. Schütze
     The cyclic oxidation behaviour of several new aluminide and platinum aluminide diffusion coatings at 1150°C
     Int. Symp. "Corrosion Science in the 21st Century", Manchester, 6.-11. July 2003
245. M. Schütze
     Stress-controlled mechanisms in the oxidation of metallic alloys
     Int. Symp. "Corrosion Science in the 21st Century", Manchester, 6.-11. July 2003
246. H.-E. Zschau, M. Schütze, H. Baumann, V. Bethge
     Improvement in the oxidation resistance of TiAl using the fluorine microalloying effect at 900°C in air
     Gordon Research Conference on High Temperature Corrosion, New London/USA, 20.-25. July 2003
247. A. Littner, M. Schütze
     Characterisation of aluminide and Pt-aluminide bond coats deposited on Ni-base superalloys
     EUROMAT 2003, European Congress on Advanced Materials and Processes, Lausanne/CH, 1.-5. September 2003
248. D. Renusch, H. Echsler, M. Schütze
     Life time modelling of APS-TBC by using acoustic emission analysis
     EUROMAT 2003, European Congress on Advanced Materials and Processes, Lausanne/CH, 1.-5. September 2003
249. D. Renusch, M. Schütze
     Experience with the use of the acoustic emission technique for monitoring scale failure in wet and dry environments
     EPRI-Workshop on scale growth and exfoliation in steam plant, Teddington/GB, 3.-5. September 2003
250. D. Renusch, M. Schorr, M. Schütze
     Chemical failure effects
     EPRI-Workshop on scale growth and exfoliation in steam plant, Teddington/GB, 3.-5. September 2003
251. D. Renusch, A. Donchev, H. Fietzek, V. Kolarik, M. Schütze
     The role of water vapour for growth stresses in the oxide scale
     EPRI-Workshop on scale growth and exfoliation in steam plant, Teddington/GB, 3.-5. September 2003
252. M. Schütze
     Modelling Fracture
     EPRI-Workshop on scale growth and exfoliation in steam plant, Teddington/GB, 3.-5. September 2003
253. E. Berghof-Hasselbächer, A. Littner, M. Schütze, M. Schorr, P. Gawenda
     Charakterisierung von Al- und PtAl-Diffusionsbeschichtungen auf Ni-Basis-Superlegierungen
     Metallographie-Tagung, Berlin, 17.-19. September 2003
254. V. Rohr, M. Schütze
     Diffusion coatings for heat exchanger materials
     EUROCORR 2003, Budapest/Ungarn, 28. September - 2. October 2003
255. M. Malessa, M. Schütze
     COTEST-Development of guidelines for cyclic oxidation testing of high temperature materials
     EUROCORR 2003, Budapest/Ungarn, 28. September - 2. October 2003
256. M. Schütze
     Schutzwirkung oxidischer Deckschichten
     DGM-Fortbildung "Hochtemperaturkorrosion", Jülich 7.-9. October 2003
257. M. Schütze
     Oxidation bei gleichzeitiger externer mechanischer Beanspruchung
     DGM-Fortbildung "Hochtemperaturkorrosion", Jülich 7.-9. October 2003
258. M. Schütze
     Deformation and fracture properties of oxide scales on mild steel at elevated temperatures
     146th ISIJ Meeting, Sapporo/Japan, 12.-13. October 2003
259. D. Renusch, H. Echsler, M. Schütze
     The Role of Bond Coat Oxidation for the Life Time of Thermal Barrier Coatings
     4. Arbeitskreissitzung Wärmedämmschichtsysteme, Institut für Werkstoffkunde, Technische Universität, Darmstadt, 4. November 2003
260. V. Rohr, M. Schütze
     Short description of the application of Cosim to the Cr-depletion during the oxidation of Alloy 800 H (Results from Bingtao, 2003)
     European Workshop on Diffusion Modelling, DECHEMA e.V., Frankfurt am Main, 17.-18. December 2003
261. T. Weber, M. Schütze
     Korrosionsschutzschichten gegen Metal Dusting Angriff
     2. KKF-Kolloquium 'Gemeinsame Forschung im Korrosionsschutz', Frankfurt am Main, 2.-3. March 2004
262. T. Weber, R. Bender, M. Schütze
     Hochtemperaturkorrosion in chlorhaltiger Verbrennungsatmosphäre
     Fachtagung Optimierungspotential der Abfallverbrennung, Berlin, 9.-10. March 2004
263. D. Renusch, H. Echsler, M. Schütze
     The role that interacting failure mechanisms have on the lifetime of APS-TBC under oxidizing conditions
     6th Int. Symp. on High Temperature Corrosion and Protection of Materials, Les Embiez/F, 16.-21. May 2004
264. A. Littner, M. Schütze
     Cyclic oxidation resistance of Al and Pt-Al diffusion coatings at 1150°C
     6th Int. Symp. on High Temperature Corrosion and Protection of Materials, Les Embiez/F, 16.-21. May 2004
265. V. Rohr, M. Schütze
     Novel low temperature diffusion coatings for heat exchanger materials
     6th Int. Symp. on High Temperature Corrosion and Protection of Materials, Les Embiez/F, 16.-21. May 2004
266. A. Donchev, M. Schütze
     Cyclic oxidation behaviour of halogen implanted Ti-46.5 Al-4(Cr,Nb,Ta,B)
     6th Int. Symp. on High Temperature Corrosion and Protection of Materials, Les Embiez/F, 16.-21. May 2004
267. V. Gauthier, F. Dettenwanger, M. Schütze, V. Shemet, W.J. Quadakkers
     Effect of aluminizing on the oxidation behaviour of γ-TiAl alloys
     6th Int. Symp. on High Temperature Corrosion and Protection of Materials, Les Embiez/F, 16.-21. May 2004
268. H.-E. Zschau, M. Schütze, H. Baumann, V. Bethge
     The quantitative role of surface doped fluorine for the improvement of oxidation resistance of TiAl in air
     6th Int. Symp. on High Temperature Corrosion and Protection of Materials, Les Embiez/F, 16.-21. May 2004
269. M. Schütze, H.Q. Nguyen, W. Fürbeth
     Korrosionsschutzschichten auf Nanopartikel-Basis
     5. Wörlitzer Workshop Funktionelle Schichten: Schichten aus Nanopartikeln - Abscheidung aus Dispersionen, Flammen und Plasmen, Wörlitz, 3. June 2004
270. M. Schütze
     The role of stresses in oxidation
     SUNASPO Meeting, Jülich, 12.-15. July 2004
271. T. Weber, M. Schütze
     Diffusion coatings for corrosion protection of high temperature structural materials
     DIMAT2004, 6th international conference on diffusion in materials, Krakau/PL, 18.-23. July 2004
272. M. Dietrich, D. Renusch. H.-E. Zschau, M. Schütze
     Influence of the atmosphere on TBC failure
     Gordon Research Conference on High Temperature Materials, Waterville/USA, 1.-6. August 2004
273. T. Weber, C. Rosado, M. Schütze
     Kodiffusionsschichten aus Aluminium, Silizium und Titan zur Verbesserung der Hochtemperaturbeständigkeit von Apparatebauwerkstoffen
     7. Werkstofftechnisches Kolloquium, Chemnitz, 30. September - 1. October 2004
274. T. Weber, C. Rosado, M. Schütze
     Development of advanced metallic coatings resistant to corrosion in high temperature industrial atmospheres
     EUROCORR 2004, Nice/F, 13.-16. September 2004
275. S. Doublet, M. Schütze
     High temperature corrosion in chloridizing atmospheres: development of material quasi-stability diagrams and coatings
     EUROCORR 2004, Nice/F, 13.-16. September 2004
276. V. Rohr, M. Schütze
     Diffusion coatings for the high temperature corrosion protection of 9-12% Cr steels
     EUROCORR 2004, Nice/F, 13.-16. September 2004
277. E. Berghof-Hasselbächer, E. Nicolas, V. Rohr, M. Schütze
     Bildanalytische Schichtdickenbestimmung an Al-Diffusionsbeschichtungen
     Metallographie-Tagung, Ruhr-Universität Bochum, 29. September - 1. October 2004
278. M. Schütze
     Recent advances in the understanding of the halogen effect in the oxidation of intermetallic titanium aluminides
     Symp. High Temperature Corrosion and Materials Chemistry V, Honolulu/USA, 3.-8. October 2004
279. E. Huttunen-Saarivirta, S. Kalidakis, F.H. Stott, V. Rohr, M. Schütze
     The erosion - corrosion resistance of aluminized and uncoated 9% chromium ferritic steels under fluidized-bed conditions of elevated temperature
     EFC-Workshop Novel Approaches to the Improvement of High Temperature Corrosion Resistance, Frankfurt am Main, 27.-29. October 2004
280. V. Rohr, M. Schütze, E. Fortuna, D.N. Tsipas, A. Milewska, F.J. Perez
     Development of novel diffusion coatings for 9-12% Cr ferritic-martensitic steels
     EFC-Workshop Novel Approaches to the Improvement of High Temperature Corrosion Resistance, Frankfurt am Main, 27.-29. October 2004
281. D. Baxter, J. Kalivodova, M. Schütze, V. Rohr, M. Spiegel, D. Skobir, M. Pomeroy, S. Arvelakis
     Gaseous corrosion of alloys and novel coatings in simulated environments for coal, waste and biomass boilers
     EFC-Workshop Novel Approaches to the Improvement of High Temperature Corrosion Resistance, Frankfurt am Main, 27.-29. October 2004
282. M. Spiegel, D. Skobir, S. Avelakis, M. Pomeroy, A. Milenska, J.P. Perez, V. Rohr, M. Schütze
     Deposit induced corrosion of CVD-coatings, steels and model alloys in simulated biomass combustion enviroment
     EFC-Workshop Novel Approaches to the Improvement of High Temperature Corrosion Resistance, Frankfurt am Main, 27.-29. October 2004
283. L. Nieto-Herro, V. Rohr, P.J. Ennis, M. Schütze, W. Quadakkers
     Steam oxidation and its potential effects on creep strength of power station materials
     EFC-Workshop Novel Approaches to the Improvement of High Temperature Corrosion Resistance, Frankfurt am Main, 27.-29. October 2004
284. M. Schütze, M. Malessa
     Reliable assessment of high temperature oxidation resistance by the development of a comprehensive code of practice for thermal cycling oxidation testing
     EFC-Workshop Novel Approaches to the Improvement of High Temperature Corrosion Resistance, Frankfurt am Main, 27.-29. October 2004
285. L. Niewolak, M. Malessa, S.Y. Coleman, M. Schütze, W.J. Quadakkers
     Influence of cycling parameter variation in thermal cyclic oxidation of high temperature materials
     EFC-Workshop Novel Approaches to the Improvement of High Temperature Corrosion Resistance, Frankfurt am Main, 27.-29. October 2004
286. M. Schütze
     Oxidationsschutz für neuartige Hochtemperatur-Leichtbauwerkstoffe durch zielgerichtete Nutzung des so genannten Halogeneffekts
     77. Tagung des Wissenschaftlichen Rates der AiF, Berlin-Adlershof, 16. November 2004
287. M. Schütze, H.Q. Nguyen, W. Fürbeth
     Neuartige Korrosionsschutzschichten durch Nanotechnologie
     12. Jahreskolloquium Grenz- und Oberflächen in der Materialforschung und Verfahrenstechnik, Karl-Winnacker-Institut, Frankfurt am Main, 25. November 2004
288. M. Schütze, M. Spiegel
     Korrosion in Anlagen zur thermischen Abfallverwertung
     GfKORR-Jahrestagung, Frankfurt am Main, 9.-10. November 2004
289. T. Weber, A. Littner, A.D. Kennedy, P. Moretto, T. Pedraza, L. Peichl, M. Schütze
     Thermal stability of Pt-modified aluminide coatings on PWA 1484 and CMSX-4 substrats between 1050 and 1200°C
     6th Int. Conf. Microscopy of Oxidation, Birmingham/UK, 4.-6. April 2005
290. Donchev, H.-E. Zschau, M. Schütze
     The halogen effect for improving the oxidation resistance of TiAl-alloys
     6th Int. Conf. Microscopy of Oxidation , Birmingham/UK, 4.-6. April 2005
291. H.-E. Zschau, M. Schütze, H. Baumann, K. Bethge
     Application of ion beam analysis for the study of the fluorine effect to improve the oxidation resistance of TiAl at 900°C in air
     Materials Seminar, University of New South Wales, School of Materials Science and Engineering, Sydney/Australia, 5. April 2005
292. M. Schütze
     Corrosion resistance at elevated temperatures in highly aggressive environments
     CORROSION/2005 Research Topical Symposium "Corrosion Resistant Materials in Extreme Enviroments", Houston/USA, 3.-7. April 2005
293. M. Schütze, A. Donchev, R.A. Yankov, E. Richter
     TiAl alloys with higher oxidation resistance
     Werkstoff-Forum Hannover Messe, Hannover, 11.-15. April 2005
294. H.-E. Zschau, M. Schütze, H. Baumann, K. Bethge
     Ion beam analysis in high temperature materials research
     Melbourne University, School of Physics, Centre of Excellence for Quantum
     Computer Technology and Microanalytical Research Centre, Melbourne/Australia, 26. April 2005
295. V. Rohr, A. Donchev, M. Malessa, M. Schütze
     Korrosionsschutzschichten für Wärmeaustauscher-Werkstoffe
     DGM-Junior-Tag, Hanau, 18. May 2005
296. S. Doublet, M. Schütze
     Entwicklung von Werkstoffbeständigkeitsdiagrammen für chlorhaltige Umgebungen des Apparate- und Anlagenbaus,
     DGM-Junior-Tag, Hanau, 18. May 2005
297. M. Schütze
     High temperature corrosion issues in ship engines
     Wärtsilä Seminar, Triest/I, 30. May 2005
298. H.-E. Zschau, M. Dietrich, D. Renusch, M. Schütze, J. Meijer, H.-W. Becker
     Detection of hydrogen in hidden and spalled layers of turbine blade coatings
     17th International Conference on Ion Beam Analysis (IBA), Sevilla/Spain, 26. June - 1. July 2005
299. M. Schütze, D. Röhnert
     Investigation of the initial stages in the metal dusting process
     Gordon Research Conference "High Temperature Corrosion" New London, NH/USA,
     24.-29. July 2005
300. D. Röhnert, M. Schütze
     Coke deposition and carbon incorporation during the incubation period of Metal Dusting
     Gordon Research Conference "High Temperature Corrosion" New London, NH/USA, 24.-29. July 2005
301. A. Donchev, M. Schütze
     Improvement of the oxidation behaviour of TiAl-alloys by treatment with halogens
     European Congress on Advanced Materials and Processes (EUROMAT 2005), Prague/Czech Republic, 5.-8. September 2005
302. H.-E. Zschau, M. Schütze, H. Baumann, K. Bethge
     The time behaviour of surface applied fluorine inducing the formation of an alumina scale on gamma-TiAl during oxidation at 900°C in air,
     European Congress on Advanced Materials and Processes (EUROMAT 2005), Prague/Czech Republic, 5.-8. September 2005
303. M. Schütze
     High temperature corrosion resistance - A key factor for lifetime in high temperature technology
     Eurocorr 2005, Lisbon/Portugal, 4.-8. September 2005
304. T. Weber, M. Malessa, M. Schütze
     Investigation of HVOF-TiAl coatings for the use in biomass and waste combustion environments
     Eurocorr 2005, Lisbon/Portugal, 4.-8. September 2005
305. V. Rohr, M. Schütze, J. Lacaze, P. Maugis, D. Poquillon, D. Monceau
     Mechanism of the pack cementation process at low temperature on 9% Cr steels
     Eurocorr 2005, Lisbon/Portugal, 4.-8. September 2005
306. D.A. Skobir, M. Spiegel, A. Milewska, F.J. Perez, V. Rohr, M. Schütze
     Stability of CVD-coatings in simulated biomass and waste combustion environments
     Eurocorr 2005, Lisbon/Portugal, 4.-8. September 2005
307. E. Berghof-Hasselbächer, M. Schorr, P. Gawenda, M. Schütze
     Potentiale und Grenzen der Interferenzschichten-Metallographie bei der Charakterisierung von Karbidtypen am Beispiel hitzebeständiger Schleudergußwerkstoffe
     39. Metallographie-Tagung, Erlangen, 14.-16. September 2005
308. E. Richter, R.A. Yankov, W. Möller, A. Donchev, M. Schütze
     Halogen PIII for high-temperature oxidation protection of γ-TiAl
     8th International Workshop on Plasma Based Ion Implantation and Deposition, Chengdu/China , 18.-22. September 2005
309. M. Schütze
     Unkonventionelle Wege für den Oberflächenschutz - Halogeneffekt und Nanoemaille
     Vortrag zum Festkolloquium anläßlich des 60. Geburtstags von Prof. Kreysa, Karl-Winnacker-Institut der DECHEMA, Frankfurt am Main, 29. September 2005
310. H.-E. Zschau, M. Schütze, H. Baumann, K. Bethge
     Anwendung der Ionenstrahlphysik in der Materialforschung
     Institutsseminar des Instituts für Kernphysik (IKF) der Johann Wolfgang Goethe-Universität Frankfurt, Frankfurt am Main, 28. October 2005
311. M. Schütze
     New approaches for the investigation of the desk top spallation of TBCs
     Sapporo Symposium, Sapporo/J, 27. November 2005
312. M. Schütze, M. Malessa, D. Renusch, P.F. Tortorelli, I.G. Wright, R.B. Dooley
     Mechanical properties and adherence of oxide scales
     International Symposium on High Temperature Oxidation and Corrosion 2005
     (ISHOC05), Nara/J, 30. November - 2. December 2005
313. T. Weber, V. Rohr, M. Schütze
     Potential use of iron-aluminides as diffusion coatings on 9 % Cr steels for
     high temperature corrosion protection
     FeAl - 3rd Discussion Meeting on the Development of Innovative Iron Aluminium Alloys, MPIE, Düsseldorf, 23.-24. January 2006
314. T. Weber, M. Malessa, M. Schütze
     Entwicklung thermisch gespritzter Ni-Cr-Si- und TiAl-Schutzschichten für Überhitzerrohre in Müllverbrennungskesseln
     VDI - Wissensforum: Beläge und Korrosion, Verfahrenstechnik und Konstruktion in Großfeuerungsanlagen, Würzburg, 25.-26. April 2006
315. R. Yankov, A. Donchev, M. Schütze, E. Richter
     Ion implantation of halogens: a promising technique for enhancing the high-temperature oxidation resistance of TiAl alloys
     Spring meering of the working groups "solid state physics" of the DPG, Dresden, 26.-31. March 2006
316. M. Schütze, E. Berghof-Hasselbächer, M. Schorr, P. Gawenda
     MTI Atlas of Microstructures
     MTI Euro TAC Meeting, Leverkusen, 26. April 2006
317. M. Schütze
     Development of Coatings for Protection in specific high temperature environments
     Int. Conf. Metallurgical Coatings and Thin Films, San Diego/USA, 1.-6. May 2006
318. A. Donchev, P. Masset, H.-E. Zschau, M. Schütze
     High temperature oxidation protection of TiAl-Alloys by using the fluorine effect
     3rd International Workshop on γ-TiAl Technologies, Bamberg, 29.-31. May 2006
319. H.-E. Zschau, M. Schütze
     Time behaviour of surface doped fluorine - condition for a stable fluorine effect
     3rd International Workshop on γ-TiAl Technologies, Bamberg, 29.-31. May 2006
320. M. Schütze
     Ionenimplantation mit Halogenen oder wie man die klassischen Vorstellung zur Hochtemperaturkorrosion auf den Kopf stellt
     Kolloquium des Instituts für Ionenstrahlphysik und Materialforschung, Forschungszentrum Rossendorf/Dresden, 22. June 2006
321. M. Schütze
     Ursachen und Mechanismen der Korrosion in thermischen Anlagen
     2. Fachtagung "Verfahren und Werkstoffe für die Energietechnik - Korrosion in Anlagen zur regenerativen Energieerzeugung", Sulzbach-Rosenberg, 28. June 2006
322. M. Schütze
     Oxidation protection by using the fluorine effect
     IMPRESS-Meeting, Toulouse/F, 17.-18. July 2006
323. S. Doublet, H. Latreche, P. Masset, T. Weber, M. Schütze
     High temperature corrosion in chlorine-based atmospheres
     Gordon Research Conference, Waterville/USA, 15.-21. July 2006
324. P. Masset, H.-E. Zschau, M. Schütze
     Assessment of the lower Al boundary in TiAl alloys for the halogen effect
     Gordon Research Conference, Waterville/USA, 15.-21. July 2006
325. M. Schütze
     Cyclic oxidation protocol and the mechanical properties of oxide scales
     Advanced Oxidation Resistant Superalloy Workshop, Dayton/USA, 22.-24. August 2006
326. M. Schütze, A. Scholz
     The present status of available test methods - can we build on them for a reliable standard
     1st Japanese-German Workshop on "Properties and performance of thermal barrier coating systems and factors affecting it", Darmstadt, 13.-15. September 2006
327. D. Renusch, M. Schütze
     Interaction spallation mechanisms and life time prediction of ceramic thermal barrier coatings
     1st Japanese-German Workshop on "Properties and performance of thermal barrier coating systems and factors affecting it", Darmstadt, 13.-15. September 2006
328. A. Donchev, E. Richter, M. Schütze, R. Yankov
     Improving the oxidation resistance of TiAl-Alloys with fluorine
     12th Int. IUPAC Conf. on High Temperature Materials Chemistry, Wien/A, 17.-22. September 2006
329. P. Masset, H.-E. Zschau, M. Schütze
     TiAl corrosion protection by using the halogen effect
     8th Liège Conf. Materials for Advanced Power Engineering, Liège/B, 18.-20. September 2006
330. T. Weber, V. Rohr, M. Schütze, P. Ennis, J. Quaddakers
     Development of aluminide diffusion coatings for heat exchanger materials and their creep-corrosion resistance in simulated coal firing environment
     8th Liège Conf. Materials for Advanced Power Engineering, Liège/B, 18.-20. September 2006
331. R. Yankov, E. Richter, A. Donchev, M. Schütze
     Efficient oxidation protection of γ-TiAl alloys by ion implantation of halogens
     15 Int. Conf. on Ion Beam Modification of Materials IBMM 2006, Taormina/I, 18.-22. September 2006
332. H.-E. Zschau, M. Schütze, H. Baumann und K. Bethge
     Surface Modification of Titanium Aluminides with   Fluorine to improve their Application for High Temperature Service Conditions
     15th International Conference on Ion Beam Modification of Materials (IBMM), Taormina/I, 18.-22. September 2006
333. P. Masset, A. Donchev, H.-E. Zschau, M. Schütze
     Recent developments in the high temperature oxidation protection of TiAl-alloys by using the fluorine effect
     EUROCORR 2006, Maastricht/NL, 24.-28. September 2006
334. T. Weber, D. Röhnert, M. Schütze
     Initial oxide scale formation during the incubation period of metal dusting
     EUROCORR 2006, Maastricht/NL, 25.-28. September 2006
335. T. Weber, M. Malessa, M. Schütze
     Investigation of HVOF-TiAl and Ni-Cr-Si-coatings for the use in biomass and waste combustion environments
     EUROCORR 2006, Maastricht/NL, 25.-28. September 2006
336. A. Donchev, M. Schütze, J. Heller, M. Scheydecker
     Oxidationsschutz für Titanaluminidbauteile durch Oberflächenbehandlung mit Flour
     Oberflächentage 2006, Bonn, 27.-29. September 2006
337. H.-E. Zschau, A. Donchev, M. Schütze, H. Baumann, K. Bethge
     Halogen ion implantation and halogen treatment as a tool for improving the oxidation resistance of γ-TiAl-Alloys at high temperatures
     Deutsche Tagung für Forschung mit Synchrotronstrahlung, Neutronen und Ionenstrahlen an Großgeräten 2006 (SNI2006), Hamburg, 4.-6. October 2006
338. D. Baxter, J. Kalivodova, M. Schütze, V. Rohr
     Corrosion behaviour of boiler steels, coatings and welds in flue gas environments
     EFC-Workshop "Protective Systems for High Temperature Applications: From Theory to Industrial Implementation", Frankfurt am Main, 12.-13. October 2006
339. A. Donchev, M. Schütze
     The halogen effect for improving the oxidation resistance of TiAl-alloys
     EFC-Workshop "Protective Systems for High Temperature Applications: From Theory to Industrial Implementation", Frankfurt am Main, 12.-13. October 2006
340. H. Latreche, S. Doublet, P. Masset, T. Weber, M. Schütze
     Behaviour of NiAl HVOF-coatings in chlorine-based atmospheres
     EFC-Workshop "Protective Systems for High Temperature Applications: From Theory to Industrial Implementation", Frankfurt am Main, 12.-13. October 2006
341. P. Masset, S. Neve, H.-E. Zschau, R. Dörner, M. Schütze
     Long term corrosion protection of TiAl-alloys using fluorine implantation
     EFC-Workshop "Protective Systems for High Temperature Applications: From Theory to Industrial Implementation", Frankfurt am Main, 12.-13. October 2006
342. D. Renusch, M. Schütze
     The role that bond coat depletion of aluminum has on the lifetime of APS-TBC
     EFC-Workshop "Protective Systems for High Temperature Applications: From Theory to Industrial Implementation", Frankfurt am Main, 12.-13. October 2006
343. H.-E. Zschau und M. Schütze
     Modelling of the Long Time Stability of the Fluorine Effect
     EFC-Workshop "Protective Systems for High Temperature Applications: From Theory to Industrial Implementation", Frankfurt am Main, 12.-13. October 2006
344. T. Weber, M. Schütze
     Aktuelle Entwicklung im Bereich Korrosionsschutzschichten für Müllverbrennung, Energie- und Prozeßtechnik
     GfKORR-Arbeitskreis "Korrosionsschutz bei erhöhten Temperaturen, Frankfurt am Main, 14. November 2006
345. H. Steinberg, T. Weber, M. Schütze
     Entwicklung von Diffusionsschichten für Apparatebauwerkstoffe im Out-of-pack-Verfahren
     GfKORR-Arbeitskreis "Korrosionsschutz bei erhöhten Temperaturen, Frankfurt am Main, 14. November 2006
346. T. Weber, V. Rohr, M. Schütze
     Thermodynamic Approach to the Development of Diffusion Coatings for Aggressive High Temperature Environments
     High Temperature Corrosion and Materials Chemistry 6, 210th Meeting of the Electrochemical Society, Cancun/Mx, 29. November - 3. December 2006
347. M. Schütze
     Werkstoffauswahl für Müllverbrennungsanlagen und Biomassekraftwerke zum Schutz vor Heißgaskorrosion
     DVS-Forschungsseminar, Stuttgart, 25. January 2007
348. D. Röhnert, M. Schütze, T. Weber
     Performance of several nickel base alloys in metal dusting atmospheres
     NACE Corrosion 2007, Nashville/USA, 12.-16. March 2007
349. M. Schütze, E. Berghof-Hasselbächer, J. Hoffman
     Development of an Atlas of Microstructures for the latest heat resistant alloys
     NACE Corrosion 2007, Nashville/USA, 12.-16. March 2007
350. D. Renusch, M. Schütze
     Measuring and Modeling the TBC Damage Kinetics by Using Acoustic Emission Analysis
     International Conference on Metallurgical Coatings and Thin Films 2007, San Diego/USA, 23.-27. April 2007
351. S. Neve, H.-E. Zschau, P. Masset , M. Schütze
     Oxidationsschutz von TiAl-Legierungen durch Ionenimplantation von Halogenen
     Workshop Ionenstrahlphysik und Nanotechnologie, Ruhr-Universität Bochum, 10. -11. May 2007
352. R.A. Yankov, A. Kolitsch, A. Rogozin, M. Steinert, A. Donchev, M. Schütze
     Oxidation-resistant γ-TiAl alloys produced by ion implantation of fluorine
     E-MRS Spring Symposium, Strasbourg/F, 28. May - 1. June 2007
353. S. Neve, H.-E. Zschau, P. Masset, M. Schütze
     Formation of a protective Alumina Layer by Fluorine Doping of Titanium Aluminide Surfaces
     11. World Conference on Ti (Ti-2007) Kyoto/J, 3. -7. June 2007
354. P. Masset, S. Neve, H.-E. Zschau, M. Schütze
     Comparative fluorine surface treatments for TiAl oxidation protection
     11. World Conference on Ti (Ti-2007) Kyoto/J, 3. -7. June 2007
355. M. Schütze
     Present status in metal dusting research
     Haldor-Topsoe Forschungsseminar, Lyngby/DK, 12. June 2007
356. H.-E. Zschau, M. Schütze
     Bedingungen für einen stabilen Oxidationsschutz von TiAl mittels F-Effekt
     MTU, München, 21. June 2007
357. M. Schütze
     Quantitative approach to the characterization of high temperature corrosion resistance in chlorine-containing environments
     Gordon Research Conference on High Temperature Corrosion, New London/USA, 29. July - 3. August 2007
358. D. Renusch, M. Schorr, G. Schmidt, M. Schütze
     Bond Coat Aluminum Depletion Kinetics
     Gordon Research Conference on High Temperature Corrosion, New London/USA, 29. July - 3. August 2007
359. M. Rudolphi. D Renusch, M. Schütze
     Delayed Spallation of Thermal Barrier Coatings
     Gordon Research Conference on High Temperature Corrosion, New London/USA, 29. July - 3. August 2007
360. R.A. Yankov, A. Kolitsch, M. Steinert, A. Donchev, M. Schütze
     Oxidation-resistant TiAl alloys produced by plasma immersion ion implantation of fluorine
     9th International Workshop on Plasma Based Ion Implantation & Deposition, Leipzig, 2.-6. September 2007
361. H.-E. Zschau, M. Schütze, H. Baumann and K. Bethge
     Long time oxidation protection of titanium aluminides by using ion beam methods
     9th   European Conference on Accelerators in Applied Research and Technology, Florenz/I, 3 .- 7. September 2007
362. P. Masset, S. Neve, H.-E. Zschau, M. Schütze
     Oxidation protection of TiAl alloys with low Al content by fluorine ion implantation
     9th European Conference on Accelerators in Applied Research and Technology, Florenz/I, 3.-7. September 2007
363. S. Neve, H.-E. Zschau, P. Masset, M. Schütze
     Comparative fluorine surface treatments for TiAl corrosion protection
     9th European Conference on Accelerators in Applied Research and Technology, Florenz/I, 3.-7. September 2007
364. H. Latreche, P. Masset, T. Weber, M. Schütze
     High temperature corrosion behaviour of NiMoAl APS-coatings in chlorine-based atmospheres
     EUROCORR 2007, Freiburg, 9.-13. September 2007
365. B. Rammer, T. Weber, M. Schütze (P)
     Development of diffusion coatings on nickel base alloys for the use in chlorine-containing high temperature processes
     EUROCORR 2007, Freiburg, 9.-13. September 2007
366. A. Donchev, M. Schütze
     Fluorine surface treatment of TiAl-alloys for aerospace applications
     Euromat 2007, Nürnberg, 10.-13. September 2007
367. P. Masset, M. Schütze
     Halogen-based treatments of TiAl alloys: a complete thermodynamic
     Euromat 2007, Nürnberg, 10.-13. September 2007
368. H.-E. Zschau and M. Schütze
     Improvement of the long time oxidation resistance of gamma-titanium aluminides by using the fluorine effect
     Euromat 2007, Nürnberg, 10.-13. September 2007
369. E. Berghof-Hasselbächer, M. Schorr, P. Gawenda, M. Schütze, J.J. Hoffman
     Entwicklung eines Mikrostrukturatlanten für die neuesten hitzebeständigen Schleudergusswerkstoffe
     41. Metallographie-Tagung 2007, Bremen, 19.-21. September 2007
370. B. Rammer, T. Weber, M. Schütze (V)
     Entwicklung von Diffusionsschichten auf Nickelbasiswerkstoffen für den Einsatz in chlorhaltigen Hochtemperaturprozessen
     10. WTK Chemnitz, 27.-28. September 2007
371. A. Donchev, A. Kolitsch, W. Möller, M. Schütze, R. Yankov
     Implantation of halogens to improve TiAl-components for high temperature applications
     2nd Meeting of the International Advisory Committee of the Ion Beam Centre at the FZD, Dresden, 1. October 2007
372. P. Masset, M. Schütze
     Improvement of the oxidation resistance of TiAl alloys using controlled gaseous fluorination ECS Meeting 212, Washington/USA, 7.-12. October 2007
373. P. Masset, M. Schütze
     Improvement of the high temperature oxidation resistance of TiAl-Alloys by using the halogen effect
     NASA Seminar, National Aeronautic and Space Agency, Cleveland/USA, 12. October 2007
374. M. Schütze
     Nanomaterialien - Stand, Entwicklungslinien und Potentiale
     Parlamentarischer Abend des DVT, Berlin, 23. October 2007
375. M. Schütze (I)
     The fundamentals of high temperature corrosion
     NES Colloquium, Paul Scherrer Institut, Villigen/CH, 31. January 2008
376. H.-E. Zschau (V)
     Die Anwendung von Beschleunigern in der Hochtemperatur-Materialforschung am Beispiel der Titanaluminide
     Präsidium des Verbandes der hessischen Unternehmer, Universität Frankfurt, 27. February 2008
377. K. Aleksandrov, M. Schütze, W. J. Quadakkers, A. Gil, T. Hüttel, E. Quandt,
     A. Gerber (V)
     Sensor-Funktion für Hochtemperaturschutzschichten zur in-situ Erfassung des Degradationszustands
     Treffen zum Schwerpunktprogramm HAUT, Stuttgart, 5. March 2008
378. H.-E. Zschau, M. Schütze, A. Donchev (V)
     Multiple F-implantation for improved oxidation protection of gamma-TiAl alloys
     TMS 2008 137^th annual meeting & exhibition, New Orleans/USA, 9.-13. March 2008
379. A. Donchev, A. Kolitsch, M. Schütze, R. Yankov (V)
     The fluorine effect for high temperature oxidation protection of TiAl-alloys for automotive and aero-engine applications
     TMS 2008 137^th annual meeting & exhibition, New Orleans/USA, 9.-13. March 2008
380. M. Schütze, H.-E. Zschau (V)
     The fluorine-effect - a new concept for oxidation protection of Ni-base alloys ?
     Universität Pittsburgh/USA, 14. March 2008
381. B. Rammer, T. Weber, R. Bender, M. Schütze (V)
     Material solutions for the thermal treatment in high chlorine environments
     NACE Corrosion 2008, New Orleans/USA, 16.-20. March 2008
382. M. Schütze (PL)
     Current technological needs for high temperature corrosion research
     CORROSION TODAY, Danzig/PL, 23.-25. April 2008
383. H. Latreche, M. Schütze (V)
     High temperature corrosion resistance of NiAlMo APS-coatings in chlorine-based
     environments
     35th International Conference on Metallurgical Coatings and Thins Films, San Diego/USA, 28. April - 2. May 2008
384. M. Schütze (I)
     Coatings for the chemical process industries
     MTI European TAC Meeting, Brüssel/B, 7.-8. May 2008
385. H. Latreche, M. Schütze (K)
     New approaches to improve high temperature corrosion resistance in chlorine-based atmospheres
     7th International Symposium on High-Temperature Corrosion and Protection of Materials Les Embiez/F, 18.-23. May 2008
386. G. Kunschert, H.-P. Martinz, M. Schütze (K)
     Investigation of oxide nucleation on ferritic FeCr interconnect alloys for solid oxide fuel cells exposed to anode and cathode gases at 850°C
     7th International Symposium on High-Temperature Corrosion and Protection of Materials, Les Les Embiez/F, 18.-23. May 2008
387. D. Renusch, M. Schütze (P)
     A Prototype Software Tool for Life Time Assessment of Thermal Barrier Coating Systems
     7th International Symposium on High-Temperature Corrosion and Protection of Materials, Les Les Embiez/F, 18.-23. May 2008
388. M. Rudolphi, D. Renusch, H.-E. Zschau, M. Schütze (P)
     Hydrogen Detection in Buried Layers of Thermal Barrier Coatings
     7th International Symposium on High-Temperature Corrosion and Protection of Materials, Les Embiez/F, 18.-23. May 2008
389. H. Latreche, P.J. Masset, T. Weber, M. Schütze (P)
     Development of advanced coatings for high temperature in chlorine based environments
     7th International Symposium on High-Temperature Corrosion and Protection of Materials, Les Embiez/F, 18.-23. May 2008
390. A. Donchev, M. Schütze (V)
     The use of fluorine for the protection of TiAl-compounds against high-temperature oxidation
     1^st EUCOMAS conference, Berlin, 26.-27. May 2008
391. P.J. Masset, M. Schütze (V)
     On the beneficial effect of halogen for the high temperature oxidation resistance of TiAl-alloys
     Universität Paul Verlaine, Metz/F, 19. June 2008
392. P.J. Masset, D. Texier, M. Schütze (P)
     Thermal expansion coefficients of (Ni0.5Al0.5)(1-x)Hfx alloys (x=0…0.2)
     Gordon Research Conference, Waterville/USA, 15.-21. July 2008
393. P.J. Masset, M. Laurent, M. Schütze (P)
     Oxide/metal interface of fluorine treated titanium aluminides
     Gordon Research Conference, Waterville/USA, 20.-25. July 2008
394. H.-E. Zschau, D. Renusch, P. J. Masset, M. Schütze (P)
     The halogen effect for Ni-base alloys - a new method for increasing the oxidation protection at high temperatures
     16th International Conference on Ion Beam Modification of Materials (IBMM'08), Dresden, 31. August - 5. September 2008
395. S. Neve, P. J. Masset, R. A. Yankov, A. Kolitsch, H.-E. Zschau, M. Schütze (P)
     High temperature oxidation resistance of fluorine-treated TiAl alloys: Chemical vs. ion beam fluorination techniques
     16th International Conference on Ion Beam Modification of Materials (IBMM'08), Dresden, 31. August - 5. September 2008
396. R.A. Yankov, A. Kolitsch, F. Munnik, A. Donchev, M. Schütze (V)
     Plasma immersion ion implantation of fluorine for oxidation-resistant TiAl alloys
     16th International Conference on Ion Beam Modification of Materials (IBMM'08), Dresden, 31. August - 5. September 2008
397. R. Pflumm, M. Schütze, A. Kolitsch, R. Yankov (V)
     Self-Growing Shark Skin Pattern on the Surface of Gamma-Titanium Aluminide Alloys
     Materials Science and Engineering MSE 08, Nürnberg, 1.-4. September 2008
398. A. Donchev, A. Kolitsch, W. Möller, M. Schütze, R. Yankov (V)
     Improvement of the high temperature oxidation resistance of Ti-alloys by a combined Al- plus F-treatment
     Materials Science and Engineering MSE 08, Nürnberg, 1.-4. September 2008
399. C. Geers, T. Weber, M. Schütze (V)
     New approach for the inhibition of carbon deposition on steel surfaces under Metal Dusting conditions
     EUROCORR 2008, Edinburgh/UK, 7.-11. September 2008
400. B. Rammer, T. Weber, M. Schütze (V)
     Diffusion coatings for aggressive high-temperature process environments
     EUROCORR 2008, Edinburgh/UK, 7.-11. September 2008
401. M. Schütze (I)
     Technology driven needs for future high temperature corrosion research
     WCO-Workshop "Needs for Corrosion Research to Solve Global Future Problems",
     Edinburgh/UK, 11. September 2008
402. M. Rudolphi, D. Renusch, M. Schütze (P)
     The effect of moisture on the delayed spallation of thermal barrier coatings
     7th International Conference on Microscopy of Oxidation, University of Chester/UK, 15.-17. September 2008
403. H.-E. Zschau, D. Renusch, P.J. Masset, M. Schütze (V)
     A new concept of oxidation protection of Ni-base alloys by using the halogen effect
     7th International Conference on Microscopy of Oxidation, University of Chester/UK, 15.-17.September 2008
404. A. Donchev, A. Kolitsch, W. Möller, M. Schütze, R. Yankov (PL)
     Plasma-Immersion-Ion-Implantation of fluorine to protect TiAl-components against high temperature oxidation
     11^th International Conference on Plasma Surface Engineering PSE 2008, Garmisch-Partenkirchen, 15.-19. September 2008
405. R.A. Yankov, A. Kolitsch, F. Munnik, W. Möller, A. Donchev, M. Schütze (V)
     Plasma immersion ion implantation of fluorine: an efficient technique for enhancing the high-temperature oxidation resistance of Ti Al alloys
     11^th International Conference on Plasma Surface Engineering PSE 2008, Garmisch-Partenkirchen, 15.-19. September 2008
406. E. Berghof-Hasselbächer, S. Diliberto, P. Gawenda, P.J. Masset, G. Schmidt, M. Schütze (V)
     Metallographische Untersuchungen der Mikrostrukturen von technischen TiAl-Legierungen
     42. Metallographie-Tagung, Jena, 17.-19. September 2008
407. U. Draugelates, B. Bouaifi, A. Gebert, M. Schütze, T. Weber (V)
     Steigerung der Prozesstemperatur in Verbrennungsanlagen durch weiterentwickelte Schichtwerkstoffe für das Auftragschweißen
     Große Schweißtechnische Tagung des DVS, Dresden, 17.-19. September 2008
408. M. Schütze (I)
     Recent advances in the quantitative characterization of mechanical scale failure
     4th IMR Symposium on Materials Science and Engineering, Shenyang/PRC, 23.-26. September 2008
409. M. Schütze (I)
     Future corrosion and protection issues at high temperatures
     WCO-Workshop, Beijing/PRC, 28. September 2008
410. M. Schütze (K)
     Hohe Temperaturen, hochaggressive Prozeßumgebungen - wie können Werkstoffe überleben?
411. P.J. Masset, M. Schütze (V)
     Oxidation behaviour of F-treated TiAl alloys in SO₂ -containing atmospheres
     ECS Fall Meeting, Honolulu/USA, 12.-15. October 2008
412. P.J. Masset, D. Texier, M. Schütze (V)
     Corrosion behaviour of NiAl_(1-x) Hf_x (x=0…0.2) alloys in chlorine based atmospheres
     ECS Fall Meeting, Honolulu/USA, 12.-15. October 2008
413. M. Schütze (PL)
     Corrosion Issues in thermal energy conversion systems
     11th International Corrosion Symposium KORSEM 08, Izmir/TR, 22.-24. October 2008
414. P.J. Masset, M. Laurent, M. Schütze (V)
     Characterisation of the oxide/metal interface of fluorine treated titanium aluminides
     DIMAT 2008, Lanzarote/E, 25.-30. October 2008
415. A. Donchev, P. Masset, M. Schütze (V)
     Surface treatment of TiAl with fluorine for improved performance at elevated temperatures
     MRS Fall Meeting 2008, Boston/USA, 1.-5. December 2008
416. H.E. Zschau, A. Donchev, M. Schütze (V)
     The role of fundamental material parameters for the fluorine effect in the oxidation protection of titanium aluminides
     MRS Fall Meeting 2008, Boston/USA, 1.-5. December 2008
417. R. Yankov, A. Kolitsch, F. Munnik, A. Donchev, M. Schütze (P)
     Ion implantation of fluorine: a promising technique for enhancing the high-temperature oxidation resistance of TiAl alloys
     MRS Fall Meeting 2008, Boston/USA, 1.-5. December 2008
418. A. Donchev, P. Masset, M. Schütze, R. Pflumm (P)
     Application of the fluorine effect to TiAl-components
     MRS Fall Meeting 2008, Boston/USA, 1.-5. December 2008
419. A. Donchev, R. Pflumm, M. Schütze (P)
     Application of the Fluorine Effect on TiAl-Components
     MRS Fall Meeting 2008, Boston/USA, 1.-5. December 2008
420. H.-E. Zschau, P. J. Masset, D. Renusch, M. Schütze (V)
     Thermodynamical Considerations for applying the Halogen Effect to Ni-Base Superalloys
     TMS 2009 138th Annual & Exhibition, San Francisco/USA, 15.-19. February 2009
421. A. Donchev, R. Braun, M. Schütze (V)
     Fluorine treatment for improved adherence of EB-PVD thermal barrier coatings on TiAl alloys
     TMS 2009 138th Annual & Exhibition, San Francisco/USA, 15.-19. February 2009
422. C. Geers, M. Schütze (V)
     New surface protection system against Metal Dusting
     NACE Corrosion 2009, Atlanta/USA, 22.-26. March 2009
423. C. Berger, M. Schütze, W. Stamm (I)
     Untersuchung der Rissausbreitung in Wärmedämmschichtsystemen unter thermomechanischer Beanspruchung
     FVV Informationstagung, Bad Neuenahr, 2. April 2009
424. B. Rammer, T. Weber, M. Schütze (V)
     Diffusion coatings for oxidizing high-chlorine environments at elevated temperatures
     ICMCTF 2009, San Diego/USA, 27. April - 1. May 2009
425. M. Rudolphi, D. Renusch, M. Schütze, M. Meijer (V)
     Moisture-induced spallation of thermal barrier coatings
     ICMCTF 2009, San Diego/USA, 27. April - 1. May 2009
426. H.-E. Zschau, M. Schütze (V)
     Application of Accelerators in High Temperature Materials Research
     IAEA International Topical Meeting on Nuclear Research Applications and Utilization of Accelerators, Wien/A, 4.-8. May 2009
427. C. Geers (P)
     Metallic Inhibitor for Metal Dusting
     ACHEMA 2009, Frankfurt am Main, 11.-15. May 2009
428. M. Schütze (I)
     Research at Karl-Winnacker-Institut der DECHEMA e.V.
     NIMS, Tsukuba/J, 25. May 2009
429. M. Schütze (I)
     An innovative concept for thermal barrier coatings
     2nd German Japanese Workshop on Thermal Barrier Coatings, Kyoto/J, 27.-29. May 2009
430. M. Rudolphi, D. Renusch, M. Schütze, J. Smialek (V)
     Water vapor effects on spallation of thermal barrier coatings
     2nd German Japanese Workshop on Thermal Barrier Coatings, Kyoto/J, 27.-29. May 2009
431. D. Renusch, M. Rudolphi, M. Schütze (V)
     Software tool for life-time assessment of TBCs
     2nd German Japanese Workshop on Thermal Barrier Coatings, Kyoto/J, 27.-29. May 2009
432. R.A. Yankov, A. Kolitsch, J. Borany, F. Munnik, A. Donchev, M. Schütze (P)
     Surface modification of Ti and low Al-content Ti-alloys for enhanced environmental stability at elevated temperatures
     E-MRS Spring Meeting 2009, Strasbourg/F, 8.- 12. June 2009
433. K. Aleksandrov, M. Schütze (V)
     Sensor-Funktion für Hochtemperaturschutzschichten zur in-situ Erfassung des Degradationszustands
     GfKORR-Arbeitskreis "Korrosionsschutz bei erhöhten Temperaturen", Frankfurt am Main 24. June 2009
434. K. Aleksandrov, M. Schütze (P)
     Depletion sensor for protective high temperature coatings
     Gordon Research Conference (GRC) "High Temperature Corrosion", Colby-Sawyer-College, New London/USA, 26.-31. July 2009
435. R. Pflumm, M. Schütze (P)
     In-situ structuring of γ-TiAl based alloys using the fluorine effect for drag reduction and protection against corrosion at high temperatures
     Gordon Research Conference (GRC) "High Temperature Corrosion", Colby-Sawyer-College, New London/USA, 26.-31. July 2009
     (awarded "Best Poster")
436. H.-E. Zschau, P. J. Masset, D. Renusch, M. Schütze (P)
     Change of the Oxidation Mechanism of Ni-base Superalloys at high Temperatures by Surface Modification with Halogens
     Gordon Research Conference (GRC) "High Temperature Corrosion", Colby-Sawyer-College, New London/USA, 26.-31. July 2009
437. A. Donchev, M. Schütze (I)
     Comparison of different fluorine treatments for the protection of TiAl-alloys against high temperature oxidation
     THERMEC´ 2009 International Conference on Processing & Manufacturing of Advanced Materials, Berlin, 25.-29. August 2009
438. H.-E. Zschau, P. J. Masset, M. Schütze (V)
     The Halogen Effect for Ni-Base Superalloys - a Thermodynamic Study
     THERMEC´ 2009 International Conference on Processing & Manufacturing of Advanced Materials, Berlin, 25.-29. August 2009
439. S. Neve, K. Stiebing, L. Ph. Schmidt, H.-E. Zschau, P. J. Masset, M. Schütze (V)
     Non-destructive Fluorine Depth Profiling as a quality assurance for the oxidation protection of TiAl turbine blades
     THERMEC´ 2009 International Conference on Processing & Manufacturing of Advanced Materials, Berlin, 25.-29. August 2009
440. K. Aleksandrov, M. Schütze (V)
     Depletion sensor for protective high temperature coatings
     EUROCORR 2009, Nizza/F, 6.-10. September 2009
441. R. Pflumm, M. Schütze (V)
     Self-assembling structured coatings on γ-TiAl surfaces via the halogen effect for high temperature applications
     European Congress and Exhibition on Advanced Materials and Processes (Euromat) 2009, Glasgow/UK, 7.-10. September 2009
442. E. Wild, W. Reimers, R. Pflumm, M. Schütze (V)
     Space resolved 2D X-ray analysis on structured surface of TNB-V5 after oxidation
     European Congress and Exhibition on Advanced Materials and Processes (Euromat) 2009, Glasgow/UK, 7.-10. September 2009
443. A. Donchev, A. Kolitsch, M. Schütze, R. Yankov (V)
     Enhancing resistance of Ti-alloys against environmental attack by a combination of Al-enrichment and F-treatment
     Euromat 2009, Glasgow/UK, 7.-10. September 2009
444. A. Kolitsch, R.A. Yankov, A. Donchev, M. Schütze (I)
     Surface modification of TiAl alloys by plasma immersion ion implantation of halogens for enhanced environmental stability at elevated temperatures: recent past, dynamic present and near future
     10th International Workshop on Plasma-Based Ion Implantation & Deposition PBII & D 2009, São José dos Campos/Brazil, 7.-11. September 2009
445. E. Berghof-Hasselbächer, P.J. Masset, D. Texier, G. Schmidt, P. Gawenda, M. Jusek, M. Schütze (V)
     Mikrostrukturen von NiAl(1-x)Hf(x)-Legierungen (x=0…0,2)
     43. Metallographie-Tagung, Aachen, 16.-18. September 2009
446. E. Wild, W. Reimers, R. Pflumm, M. Schütze (P)
     Space-resolved 2D X-ray phase analysis on structured TNB-V5 after oxidation for 24hr at 900°C
     Jahresbericht HASYLAB 2008
447. R. Pflumm, M. Schütze (P)
     the surface of γ-TiAl alloys via fluorine effectSelf-growing shark skin pattern on
     European Federation of Corrosion Workshop EFC-Event No. 321, Frankfurt am Main, 30. September - 2. October 2009
448. R. Pflumm, M. Schütze, C. Büttner, M. Fröhlich, U. Schulz, P. Zhang, A. Flores-Renteria, C. Leyens (P)
     Adaptive high temperature coatings: methods and characterisation
     European Federation of Corrosion Workshop EFC-Event No. 321, Frankfurt am Main, 30. September - 2. October 2009
449. A. Donchev, A. Kolitsch, M. Schütze, R. Yankov (P)
     Combined Al- plus F-treatment of Ti-alloys for improved behaviour at elevated temperatures
     European Federation of Corrosion Workshop EFC-Event No. 321, Frankfurt am Main, 30. September - 2. October 2009
450. K. Aleksandrov, M. Schütze (P)
     Depletion sensor for protective high temperature coatings
     European Federation of Corrosion Workshop EFC-Event No. 321, Frankfurt am Main, 30. September - 2. October 2009
451. H.-E. Zschau, P.J. Masset , M. Schütze (V)
     Oxidation Protection of Ni-base Superalloys by Halogen Treatment: Solutions for High Temperature Corrosion Protection in Energy Conversion Systems
     European Federation of Corrosion Workshop EFC-Event No. 321, Frankfurt am Main, 30. September - 2. October 2009
452. S. Neve, H.-E. Zschau, P. J. Masset, M. Schütze (P)
     Measurements of fluorine depth-profiles on TiAl turbine blades using ion beam analytical techniques
     European Federation of Corrosion Workshop EFC-Event No. 321, Frankfurt am Main, 30. September - 2. October 2009
453. M. Rudolphi, M. Schütze (P)
     Moisture induced damage in oxide scales
     European Federation of Corrosion Workshop EFC-Event No. 321, Frankfurt am Main, 30. September - 2. October 2009
454. R. Durham, M. Schütze, H. Pohkmurska, B. Wielage, A. Gebert (P)
     Development of advanced thermal spray and overlay weld coatings for application in waste incineration environments
     European Federation of Corrosion Workshop EFC-Event No. 321, Frankfurt am Main, 30. September - 2. October 2009
455. B. Rammer, M. Schütze (P)
     Material solutions for a new process of Nutrient Recovery by thermochemical treatment of sewage sludge ashes
     European Federation of Corrosion Workshop EFC-Event No. 321, Frankfurt am Main, 30. September - 2. October 2009
456. X. Montero, M. Schütze (P)
     Particoat: New Multipurpose coating systems based on novel particle technology for extreme environments at high temperatures
     European Federation of Corrosion Workshop EFC-Event No. 321, Frankfurt am Main, 30. September - 2. October 2009
457. P. Masset, M. Schütze (P)
     High temperature oxidation/corrosion of titanium aluminides
     European Federation of Corrosion Workshop EFC-Event No. 321, Frankfurt am Main, 30. September - 2. October 2009
458. C. Geers, M. Schütze (V)
     Inhibition of metal dusting by an intermetallic Ni-Sn coating
     European Federation of Corrosion Workshop EFC-Event No. 321, Frankfurt am Main, 30. September - 2. October 2009
459. C. Geers, M. Schütze (V)
     Selective Inhibition of Metals on Material Surfaces Catalyzing the Metal Dusting Process
     216th ECS Meeting, Wien/A, 4.-9. October 2009
460. H.-E. Zschau, P.J. Masset , M. Schütze (V)
     Screening of the fluorination parameters to improve the oxidation resistance of Ni-base superalloys at elevated temperatures
     216th ECS Meeting, Wien/A, 4.-9. October 2009
461. S. Neve, P. J. Masset, H.-E. Zschau, M. Schütze (P)
     Effect of heating rate on the fluorine content in TiAl-alloy after oxidation at 900°C
     216th ECS Meeting, Wien/A, 4.-9. October 2009
462. M. Schütze (I)
     Konzepte für die Entwicklung von Schutzschichten für aggressive Hochtemperaturumgebungen
     4. Freiberger Fachtagung Dampferzeugerkorrosion, Freiberg/Sachsen, 6.-7. October 2009
463. H.-E. Zschau, P.J. Masset , M. Schütze (V)
     Screening of the fluorination parameters to improve the oxidation resistance of Ni-base superalloys at elevated temperatures
     216th ECS Meeting, Wien/A, 4.-9. October 2009
464. S. Neve, P. J. Masset, H.-E. Zschau, M. Schütze (P)
     Effect of heating rate on the fluorine content in TiAl-alloy after oxidation at 900°C
     216th ECS Meeting, Wien/A, 4.-9. October 2009
465. M. Schütze (I)
     Konzepte für die Entwicklung von Schutzschichten für aggressive Hochtemperaturumgebungen
     4. Freiberger Fachtagung Dampferzeugerkorrosion, Freiberg/Sachsen, 6.-7. October 2009
466. A. Donchev, M. Schütze, A. Kolitsch, R. Yankov (V)
     Enhanced resistance of Ti-alloys against environmental attack by a combined Al- and F-treatment
     TMS 2010 139th Annual meeting & exhibition, Seattle/USA, 14.-18. February 2010
467. E. Berghof-Hasselbächer, M. Schütze (V)
     MTI Atlas of Microstructures - A Brief Overview
     MTI Euro TAC Meeting, Frankfurt am Main, 29.-30. March 2010
468. H.-E. Zschau, M. Schütze (V)
     Oxidation protection of titanium aluminides and Ni-Base superalloys at high temperatures by fluorine ion implantation
     Workshop "Ion Beam Physics", Forschungszentrum Dresden-Rossendorf, 29.-31. March 2010
469. M. Rudolphi, D. Renusch, M. Schütze (V)
     Modeling Aluminum Depletion Kinetics in MCrAlY Coatings
     37th International Conference on Metallurgical Coatings and Thin Films, San Diego/USA, 26.-30. April 2010
470. M. Schütze (I)
     Testing methods for assessing high temperature surface degradation
     ECI-Conference "Surface Stability of Materials in High Temperature Aggressive Environments", Vail/USA, 16.-20. May 2010
471. E. Berghof-Hasselbächer (V)
     Schichtpräparation in der Korrosionsforschung
     56. Treffen des Arbeitskreises Metallographischer Erfahrungsaustausch Rhein-Main, Mammelzen, 19. May 2010
472. H.-E. Zschau, D. Renusch, P. J. Masset, M. Schütze (V)
     Formation of a protective alumina scale on Ni-base superalloys by using the halogen effect
     European Symposium on Superalloys and their Applications (Euro Superalloys), Wildbad Kreuth, 25.-28. May 2010
473. A. Donchev, M. Schütze (V)
     Fluorine treatment of TiAl-components for enhancing high-temperature oxidation resistance
     EUCOMAS 2010, Berlin, 7.-8. June 2010
474. R. Yankov, A. Kolitsch, F. Munnik, J. von Borany, A. Donchev, M. Schütze (P)
     Formation of an alumina-containing scale for the surface protection of TiAl alloys and Ti against environmental degradation
     CIMITEC 2010 12th International Ceramics Congress, Montecatini Terme, 6.-11. June 2010
475. A. Kolitsch, R. Yankov, A. Donchev (I)
     Improvement of the oxidation behaviour of complex shaped TiAl-alloys by plasma immersion ion implantation with fluorine
     18th International Conference on Ion Implantation Technology, Kyoto/Japan, 6.-11. June 2010
476. R.N. Durham, M. Schütze, H. Pokhmurska, B. Wielage, D. Franik, A. Gebert (V)
     Development of advanced thermal spray & overlay weld coatings for application in waste incineration environments
     Corrosion 2010, Lviv/Ukraine, 8.-10. June 2010
477. R. Braun, M. Fröhlich, C. Leyens, P.E. Hovsepian, A.P. Ehiasarian, F. Rovere, P.H. Mayrhofer, A. Donchev (V)
     TBC systems on gamma titanium aluminides
     2nd International EJC-PISE Workshop, Kiev/Ukraine, 16.-17. June 2010
478. K. Aleksandrov, M. Schütze, I. Teliban, E. Quandt (V)
     High temperature protective coatings with sensor function
     1st International Conference on Materials for Energy, Karlsruhe, 4.-8. July 2010
479. M. Schütze (PL)
     Non-conventional solutions for the protection of materials at high temperatures
     1st International Conference on Materials for Energy, Karlsruhe, 4.-8. July 2010
480. H.-E. Zschau, P.J. Masset, M. Schütze (P)
     Thermodynamical assessment of the halogen effect for Ni-based superalloys
     1st International Conference on Materials for Energy, Karlsruhe, 4.-8. July 2010
481. R. Pflumm, M. Schütze (V)
     Shark-skin inspired surface engineering on intermetallic titanium aluminides for high temperature applications using the fluorine effect
     Materials Science and Engineering 2010, Darmstadt, 24.-26. August 2010
482. M. Rudolphi, D. Renusch, M. Schütze (V)
     Four-point bending with acoustic emission measurement for lifetime assessment of thermal barrier coatings
     Materials Science and Engineering 2010, Darmstadt, 24.-26. August 2010
483. R.N. Durham, M. Schütze, H. Pokhmurska, B. Wielage, D. Franik, A. Gebert (V)
     Elevated temperature corrosion of thermally sprayed and cladded coatings in simulated chlorine containing environments
     24th International Conference on Surface Modification Technologies (SMT 24), Dresden, 7.-9. September 2010
484. R. Yankov, A. Kolitsch, F. Munnik, J. von Borany, A. Donchev, M. Schütze (P)
     Suppression of oxygen-induced embrittlement in Ti by plasma immersion ion implantation (PIII)-based processing
     12th International Conference on Plasma Surface Engineering PSE 2010, Garmisch-Partenkirchen, 13.-17. September 2010
485. S. Neve, H.-E. Zschau, K. E. Stiebing, L.Ph.H. Schmidt, M. Schütze (P)
     An ion beam analysis chamber for non-destructive depth-profiling on TiAl turbine blades
     10th European Conference on Accelerators in Applied Research and Technology ECAART, Athen/GR, 13.-17. September 2010
486. M. Rudolphi, H. Aleksanoglu, D. Renusch, A. Mao, M. Scholz, C. Berger, M. Schütze (I)
     Untersuchung der Rissausbreitung in Wärmedämmschichtsystemen unter thermomechanischer Beanspruchung
     FVV Informationstagung Turbomaschinen, Bamberg, 16. September 2010
487. E. Berghof-Hasselbächer, P.J. Masset, D. Texier, G. Schmidt, P. Gawenda, M. Jusek, M. Schütze (V)
     Mikrostrukturen von (Ni0,5Al0,5)(1-x)Hf(x)-Legierungen (x=0…0,2)
     43. Metallographie-Tagung, Aachen, 16.-18. September 2009
488. H.-E. Zschau, F. King, M. Schütze (P)
     Formation of an adherent protective Alumina Scale on Ni-base Superalloys by combining the Halogen and the Reactive Element Effect
     9th Conference on Materials for Advanced Power Engineering, Liège/B, 27.-29. September 2010
489. B. Wielage, H. Pokhmurska, R.N. Durham, M. Schütze, D. Franik, A. Gebert (V)
     Thermisches Beschichten von korrosiv beanspruchten Bauteilen für Hochtemperaturanwendungen
     13. Werkstofftechnisches Kolloquium, Chemnitz, 30. September - 1. October 2010
490. M. Schütze (I)
     Korrosionsverhalten verschiedener Werkstoffe unter Oxyfuelbedingungen
     36. VDI-Jahrestagung Schadensanalyse, Würzburg, 13.-14. October 2010
491. A. Donchev, M. Schütze, A. Kolitsch, R. Yankov (V)
     Protection of TiAl-components against high temperature oxidation with fluorine
     Materials Science & Technology MS&T 2010, Houston/USA, 17.-21. October 2010
492. A. Donchev, M. Schütze, A. Kolitsch, R. Yankov (V)
     Improved environmental resistance of Ti-alloys at elevated temperatures by a combined Al- and F-treatment
     Materials Science & Technology MS&T 2010, Houston/USA, 17.-21. October 2010
493. M. Schütze, M. Rudolphi, H. Aleksanoglu, A. Scholz, C. Berger, W. Stamm (I)
     Fracture mechanics based failure prediction of thermal barrier coating and bond coats
     Int. Workshop on Heat Resistant and High-Temperature Corrosion Resistant Materials for Solving the Energy Issues, Tokyo/J, 4.-5. November 2010
494. D. Schmidt, M. Schütze (P)
     Improved corrosion resistance of superheater materials in H₂O containing environments via Mn-diffusion coatings
     ISHOC-10, Zushi/J, 8.-11. November 2010
495. M. Schütze, M. Rudolphi (I)
     Prediction of mechanical scale failure - Current status and perspectives
     ISHOC-10, Zushi/J, 8.-11. November 2010
496. M. Schütze (I)
     Prediction of mechanical scale failure - Current status and perspectives
     ISHOC-10, Zushi/J, 8.-11. November 2010
497. H.E. Zschau, M. Schütze (V)
     Oxidation protection of titanium aluminides and Ni-base superalloys at high temperatures by the halogen effect - Principles and applications
     ISHOC-10, Zushi/J, 8.-11. November 2010
498. R. Pflumm, M. Schütze (V)
     Shark Skin Inspired Surface Engineering on γ-TiAl for High Temperature Applications using the Fluorine Effect
     MRS Fall Meeting 2010, Boston/USA, 29. November - 3. December 2010
499. R. Pflumm, M. Schütze (V)
     Eine Haifischhaut für Hochtemperaturanwendungen Strömungsoptimierte Schutzschichten
     Sitzung der projektbegleitenden Ausschüsse "Titan", Frankfurt am Main, 26. January 2011
500. M. Schütze; K. Aleksandrov, I. Teliban, E. Quandt (I)
     Sensor coatings for high temperature applications
     NACE Corrosion 2011, Houston/USA, 13.-17. March 2011
501. H.-E. Zschau, M. Schütze (V)
     Der Halogeneffekt bei Nickelbasis-Legierungen als Alternative zu konventionellen Turbinenschaufelbeschichtungen
     Workshop "Turbinenschaufelbeschichtung", Europäische Forschungsgemeinschaft Dünne Schichten (EFDS), Dresden, 15. March 2011
502. D. Schmidt, M. Schütze (V)
     Improved Oxidation Resistance of Ferritic-Martensitic Steels in Water Vapour Containing Environments via Diffusion Coatings
     8th International Conference on the Microscopy of Oxidation, Liverpool/UK, 11.-13. April 2011
503. K. Aleksandrov, M. Schütze, I. Teliban, E. Quandt (V)
     Innovative Coatings with Combined Reservoir Sensor Function for High Temperature Applications
     8th International Conference on the Microscopy of Oxidation, Liverpool/UK, 11.-13. April 2011
504. X. Montero, M. Galetz, M. Schütze (V)
     New protective coating system based on micro-scale aluminium particle technology for extreme environments at high temperatures
     8th International Conference on the Microscopy of Oxidation, Liverpool/UK, 11.-13. April 2011
505. M. Schütze (I)
     Coatings for severe high temperature corrosion conditions
     ICMCTF 2011, San Diego/USA, 2.-6. May 2011
506. X. Montero, M. Galetz, M. Schütze (V)
     A single step process to form in-situ an alumina foam/aluminide TBC system for alloys in extreme environments at high temperatures
     ICMCTF 2011, San Diego/USA, 2.-6. May 2011
507. H. Aleksanoglu, A. Scholz, C. Berger, M. Oechsner, M. Rudolphi, M. Schütze, W. Stamm (V)
     Determining a critical strain for APS thermal barrier coatings under service relevant loading conditions
     2nd International TMF-Workshop, Berlin, 12.-13. May 2011
508. M. Schütze (PL)
     Diffusion aspects in high temperature corrosion and in the development of protective coatings
     DIMAT 2011, Dijon/F, 3.-8. July 2011
509. D. Schmidt, X. Montero, M. Galetz, M. Schütze (V)
     Development of a manganese chromium diffusion coating for ferritic-martensitic steels
     DIMAT 2011, Dijon/F, 3.-8. July 2011
510. M. Schütze (I)
     Hochtemperaturkorrosion als lebensdauerbestimmender Faktor in thermischen Anlagen
     Seminar des Fraunhofer Instituts für Zerstörungsfreie Prüfverfahren, Saarbrücken, 18. July 2011
511. M. Schütze, M. Rudolphi (I)
     Modeling und prediction of oxide scale failure
     Gordon Research Conference on High Temperature Corrosion, New London/USA,
     24.-29. July 2011
512. H.-E. Zschau, M. Schütze
     Formation of a protective alumina scale during initial oxidation of F-doped TiAl
     Gordon Research Conference "High Temperature Corrosion",New London/USA, 24.-29. July 2011
513. M. Rudolphi, M. Schütze, H. Aleksanoglu, A. Scholz, C. Berger,M. Oechsner, W. Stamm (K)
     Failure prediction of thermal barrier coatings using a fracture mechanics approach
     Thermal Barrier Coatings III, Irsee, 7.-12. August 2011
514. K. Aleksandrov, M. Schütze, I. Teliban, E. Quandt (V)
     Protective high temperature coatings with sensor function for residual life-time
     EUROCORR 2011, Stockholm/S, 4.-8. September 2011
515. I. Teliban, C. Thede, S. Chemniz, C. Bechtold, E. Quandt, T. Hüttel, W. Quadakkers, K. Aleksandrov, M. Schütze (V)
     Sensor for monitoring the depletion state of high temperature protective coatings
     EUROCORR 2011, Stockholm/S, 4.-8. September 2011
516. R. Pflumm, A. Donchev. M. Schütze (V)
     In-situ surface structuring of TiAl-intermetallics via the fluorine effect for drag reduction
     European Congress and Exhibition on Advanced Materials and Processes (Euromat) 2011, Montpellier/F, 12.-15. September 2011
517. M. Schütze, A. Donchev, S. Friedle (I)
     Recent advances in the understanding of the Halogen effect for oxidation protection of γ-TiAl
     4th International Workshop on Titan Aluminides, Nürnberg, 13.-16. September 2011
518. L. Bortolotto, C. Langlade, B. Pelic, D. Rafaja, M. Schütze, H.J. Seifert, G. Wolf, P.J. Masset (V)
     Characterisation of oxidation protective coatings for titanium aluminides
     4th International Workshop on Titan Aluminides, Nürnberg, 13.-16. September 2011
519. E. Berghof-Hasselbächer, P. J. Masset, L. Zhang, L. Liu, Z. Jin, G. Schmidt, M. Galetz, M. Schütze (V)
     Mikrostrukturen von Erbium modifizierten Aluminium-Kupferlegierungen
     45. Metallographie-Tagung, Karlsruhe, 14.-16. September 2011
520. M. Schütze, W. Fürbeth (I)
     Korrosionsschutz zur Steigerung der Ressourceneffizienz
     WING-Konferenz 2011, Berlin, 4.-6. October 2011
521. M. Schütze (PL)
     Iron aluminides as a key phase in protective coatings for high temperature
     FeAl2011, Lanzarote/E, 5.-7. October 2011
522. X. Montero, M. Galetz, M. Schütze (V)
     Influence of the particles and substrate composition on the performance of new protective coating system based on micro-scale aluminium particle technology at extreme environments at high temperatures
     FeAl2011, Lanzarote/E, 5.-7. October 2011