Contact:
Prof. Dr.-Ing. Michael Schütze

Tel.: +49 69 / 75 64 - 361
E-mail: schuetze
DFI-Stifter

Continuing Professional Development

Quantitative Biology: Current Concepts and Tools for Microbial Strain and Process Development
Berlin 2013-07-15 - 2013-07-19

High temperature materials - Publications

Scientific Papers

Books

Contributions to Newspapers

 

Scientific Papers

Corrosion and Creep/LCF

K.-H. Döhle, A. Rahmel, M. Schmidt, M. Schütze
Two Different Test Rigs for Creep Experiments in Aggressive Environments
in "Corrosion and Mechanical Stress at High Temperatures", Eds. V. Guttmann, M. Merz, Applied Science Publishers, London (1981) 441
U. Bruch, K. Döhle, J. Pütz, A. Rahmel, M. Schütze, K.D. Schuhmacher
Comparison of the Corrosion Behaviour of Different High Temperature Alloys with and without Superimposed Creep Deformation in an Artificial Steam Reformer Atmosphere
in "Metallic Corrosion 1984", Vol. III, National Research Council Canada, Toronto (1984) 325
M. Schütze
The Influence of High Temperature Corrosion on Creep and Fracture Behaviour of Heat Resistant Steels
in "Creep and Fracture of Engineering Materials and Structures", Eds. B. Wilshire, D. Owen, Pineridge Press, Swansea (1984) 801
B. Ilschner, M. Schütze
Interaction Between Oxidation (Sulfidation, Carburization) and Creep
Oxidation of Metals 23 (1985) 287-292
J. Barbehön, A. Rahmel, M. Schütze
Behaviour of Alloy 800 H under Cyclic Deformation and Superimposed Oxidation
in "High Temperature Alloys for Gas Turbines and Other Applications 1986", Eds. W. Betz et al. D. Reidel Publishing Company, Dordrecht (1986) 1267
V. Guttmann, M. Schütze
Interactions of Corrosion and Mechanical Properties
in "High Temperature Alloys for Gas Turbines and Other Applications 1986", Eds. W. Betz et al., D. Reidel Publishing Company, Dordrecht (1986) 293
J. Barbehön, A. Rahmel, M. Schütze
Investigations on the Interaction of LCF and Oxidation
in "Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials", Ed. K.-T. Rie, Elsevier Appl. Sci., London (1987) 371
M. Welker, M. Schütze, A. Rahmel
Untersuchungen zur Wechselwirkung zwischen Korrosion und Rißfortschritt bei Hochtemperatur-Kriechverformung
in "Bruchvorgänge 1987", DVM, Berlin (1987) 345
M. Schütze
Anrißentstehung und Anrißwachstum unter korrosiven Bedingungen bei hohen Temperaturen
in "Korrosion und Bruch", DVM, Berlin (1988) 279
M. Schütze
Concept for the Assessment of the Contribution to Damage by the Interaction of High Temperature Corrosion and Mechanical Stresses
Proc. Conf. 9th Europ. Congr. Corr., Vol. I, Europ. Federation of Corrosion (1989) FU-202
M. Schütze
The Role of the Interaction of Corrosion and Mechanical Factors for Degradation of Materials
Materials Science and Engineering A 121 (1989) 563
M. Welker, A. Rahmel, M. Schütze
Oxidation and Nitridation of Alloy 800 H at a Growing Creep Crack and for Unstressed Samples
Metallurgical Transactions A 20 (1989) 1541
M. Welker, A. Rahmel, M. Schütze
Investigations on the Influence of Internal Nitridation on Creep Crack Growth in Alloy 800 H
Metallurgical Transactions A 20 (1989) 1553
M. Schütze, H. Fellmann
Investigations on Creep Crack Growth in Air and Oxygen + SO2
in "High Temperature Materials for Power Engineering 1990", Eds. E. Bachelet et al., Kluwer Academic Publ., Dordrecht (1990) 199
M. Schütze
The Interaction of High Temperature Corrosion and Mechanical Factors
in "High Temperature Corrosion and Protection", Eds. H. Guan et al., Liaoning Science and Technology Publ., Shenyang (1991) 359
M. Schütze, H. Fellmann, B. Glaser
Kriechrißwachstum in Luft und SO2-haltiger Umgebung
Materialprüfung 33 (1991) 11
M. Schütze, H. Fellmann, B. Glaser
Untersuchungen zum Kriechrißwachstum in Luft und O2-SO2
in "Bruchvorgänge 1991", DVM, Berlin (1991) 357
M. Welker, H. Fellmann, B. Glaser, M. Schütze
Creep Crack Growth of Materials for the Chemical and Petrochemical Industries
in "Heat-Resistant Materials", Eds. K. Natesan, D.J. Tillack, ASM International, Ohio (1991) 477
M. Schütze, H. Fellmann
Corrosion Processes at Growing Creep Cracks
in "Corrosion - Deformation Interactions", Eds. T. Magnin, J.M. Gras, Les Editions de Physique, Les Ulis (1992) 565-576
M. Schütze, B. Glaser
The Role of Environmental Effects for the Mechanical Behaviour of Materials at High Temperatures
in "Aspects of High Temperature Deformation and Fracture in Crystalline Materials", Eds. Y. Hosoi et al., The Japan Institute of Metals, Sendai (1993) 561-567
M. Schütze
Hochtemperaturkorrosion und mechanische Beanspruchung
in "Korrosion verstehen - Korrosionsschäden vermeiden", Eds. H. Gräfen, A. Rahmel, Verlag Irene Kuron, Bonn (1994) 402-410
M. Schütze, B. Glaser
The Influence of Cl-Containing Atmospheres on Creep Crack Growth at 800ºC
in "Heat-Resistant Materials II", Eds. K. Natesan et al., ASM International, Materials Park (Ohio) (1995) 343-351
M. Schütze, V. Guttmann, M.F. Stroosnijder
Simultaneous Corrosion and Mechanical or Thermal Stresses
in "Guidelines for Methods of Testing and Research in High Temperature Corrosion", Eds. H.J. Grabke, D.B. Meadowcroft, European Federation of Corrosion Publications No. 14, The Institute of Materials, London (1995) 104-120
J.P.T. Vossen, M. Schütze
Limits for the Recovery of Chromium Oxide Scales on Heat-resistant Stainless Steels in Air With and Without Superimposed Mechanical Load at 650°C
Proc. Int. Conf. Corrosion-Deformation Interactions (CDI), Vol. IV, Paper P 40 Centre Français de l'Anticorrosion/Société de Chimie Industrielle, Paris (1996)
A. Jeutter, M. Schütze
The Influence of HCl-containing Atmospheres on High Temperature Corrosion of Coated and Uncoated Nickel-Base Superalloys under Complex Loading Conditions
Proc. EUROMAT 97, Vol. 1, Netherlands Society for Materials Science, Zwijndrecht/NL (1997) 223-226
M. Schütze
Werkstoffverhalten bei Wechselwirkung von Hochtemperaturkorrosion und mechanischer Belastung
in "Hochtemperaturkorrosion in der Prozeßtechnik", TAW-Verlag, Wuppertal (1998) 1-23
M. Schütze, A. Jeutter
High temperature corrosion resistance of gas turbine materials and coatings under the influence of Cl-contaminations
in "Materials for advanced power engineering 1998", Eds. J. Lecomte-Beckers et al., Reihe Energietechnik, Vol. 5, Forschungszentrum Jülich (1998) 1543-1552
A. Jeutter, M. Schütze
The Role of HCl Impurities in the Environment and Y for the High Temperature Corrosion of CoNiCrAl(Y)-Coatings on a Ni-base Superalloy under Complex Loading Conditions
Materials at High Temperatures 16 (1999) 71-86
A. Zeller, F. Dettenwanger, M. Schütze
Influence of Water Vapor on the Creep Behaviour of TiAl
in "Gamma Titanium Aluminides 1999", Eds. Y.-W. Kim et al., TMS, Warrendale (1999) 761-768
M. Schütze
Hochtemperaturkorrosion bei gleichzeitiger mechanischer Beanspruchung
in "Korrosion und Korrosionsschutz", Ed. E. Kunze, Wiley-VCH, Weinheim (2001) 648-687
A. Zeller, F. Dettenwanger, M. Schütze
Influence of water vapour on the creep and fatigue properties of TiAl
Intermetallics 10 (2002) 33-57

 

Mechanical Properties of Oxide Scales

M. Schütze, A. Rahmel
Das Verhalten von Oxidschichten unter mechanischer Belastung
in "Aufbau von Oxidschichten auf Hochtemperaturwerkstoffen und ihre technische Bedeutung", Ed. A. Rahmel, Deutsche Gesellschaft für Metallkunde, Oberursel (1983) 245
M. Schütze, A. Rahmel
Influence of Constant Strain Rates on Growth and Cracking Behavior of Oxide Scales and on Internal Corrosion of a 18Cr-0.8Al-1.5Si Steel
in "High Temperature Corrosion", Ed. R. Rapp, NACE, Houston (1983) 421
M. Schütze, A. Rahmel
Observations on the Cracking Behaviour of Oxide Scales During Creep of the Base Metal and on Creep Enhanced Internal Corrosion
in "Corrosion Resistant Materials for Coal Conversion Systems", Eds. D. Meadowcroft, M. Manning, Applied Science Publ, London (1983) 439
M. Schütze
Deformation and Cracking Behavior of Protective Oxide Scales on Heat-Resistant Steels under Tensile Strain
Oxidation of Metals 24 (1985) 199
M. Schütze
The Healing Behavior of Protective Oxide Scales on Heat-Resistant Steels after Cracking under Tensile Strain
Oxidation of Metals 25 (1986) 409
M. Schütze
Computer Simulation of Oxide Scale Cracking/Healing Processes under Substrate Creep at High Temperatures and Comparison of the Results to Experimental Data
Materials and Corrosion 38 (1987) 637
M. Schütze
The Limits to the Protective Effect of Oxide Scales on High Temperature Materials Which are Subjected to Strain
in "High Temperature Alloys - Their Exploitable Potential", Elsevier Applied Science, London (1987) 79
J. Barbehön, A. Rahmel, M. Schütze
Behavior of the Scale on a 9.5Cr Steel under Cyclical Deformation of the Base Metal
Oxidation of Metals 30 (1988) 85
M. Schütze
Stresses and Decohesion of Oxide Scales
Materials Science and Technology 4 (1988) 407
W. Christl, A. Rahmel, M. Schütze
Behavior of Oxide Scales on 2.25Cr-1Mo Steel During Thermal Cycling. I. Scales Formed in Oxygen and Air
Oxidation of Metals 31 (1989) 1
W. Christl, A. Rahmel, M. Schütze
Behavior of Oxide Scales on 2.25Cr-1Mo Steel During Thermal Cycling. II. Scales Grown in Water Vapor
Oxidation of Metals 31 (1989) 35
M. Schütze
Plasticity of Protective Oxide Scales
Materials Science and Technology 6 (1990) 32
I. Küppenbender, M. Schütze
Deformation and Cracking Behaviour of NiO Scales on Nickel
Proc. EUROCORR '91, GTE, Budapest (1991) 342
M. Schütze
Assessment of the Limits to the Protective Effect of Oxide Scales in High Temperature Technology, Set by Deformation of the Substrate Material
Int. J. Pres. Ves. Pip. 47 (1991) 293
A. Rahmel, M. Schütze
Mechanical Aspects of the Rare-Earth Effect
Oxidation of Metals 38 (1992) 255
M. Schütze
Failure of Oxide Scales on Advanced Materials Due to the Presence of Stresses
in "High Temperature Corrosion of Advanced Materials and Protective Coatings", Eds. Y. Saito et al., Elsevier, Amsterdam (1992) 39
M. Schütze
Fundamental Aspects of High Temperature Corrosion and The Role of Surface Layers in Corrosion-Deformation Interactions
in "Corrosion-Deformation Interactions", Eds. T. Magnin, J.M. Gras, Les Editions de Physique, Les Ulis (1992) 703
M. Schütze
Mechanical Aspects of High-Temperature Oxidation
Corrosion Science 35 (1993) 955-963
M. Walter, M. Schütze, A. Rahmel
Behavior of Oxide Scales on 12Cr-1Mo Steel During Thermal Cycling
Oxidation of Metals 39 (1993) 389-410
M. Walter, M. Schütze, A. Rahmel
Behavior of Oxide Scales on Alloy 800 H and HK 40 During Thermal Cycling
Oxidation of Metals 40 (1993) 37
A.M. Huntz, M. Schütze
Stresses Generated During Oxidation Sequences and High Temperature Fracture
Mater. High Temp. 12 (1994) 151-161
I. Küppenbender, M. Schütze
The Deformation Behavior of NiO Scales on Ni in Argon and Air at Temperatures from 20 to 800ºC With Respect to the Relief of Growth Stresses
Oxidation of Metals 42 (1994) 109-144
S.R.J. Saunders, M.M. Nagl, M. Schütze
Measurement Methods for the Determination of Fracture Strain
Mater. High Temp. 12 (1994) 103-109
M. Schütze
An Approach to a Global Model of the Mechanical Behaviour of Oxide Scales
Mater. High Temp. 12 (1994) 237-247
M. Schütze, M. Schmitz
The Oxidation Behaviour of Titanium Aluminide under the Effect of Mechanical Stresses
Trans. Mat. Res. Soc. Jpn. 14A (1994) 219-224
M. Schütze
Mechanical Properties of Oxide Scales
Oxidation of Metals 44 (1995) 29-61
M. Schütze, M. Schmitz-Niederau
Interaction of Mechanical Loading and Oxidation at 900ºC for TiAl
in "Gamma Titanium Aluminides", Eds. Y.-W. Kim, R. Wagner, M. Yamaguchi, TMS Warrendale (1995) 83-92
M. Schütze, J.R. Nicholls
Behavior of Scales Under Mechanical Loading
Oxidation of Metals 45 (1996) 605-613
C. Bruns, M. Schütze
Messung der Haftfestigkeit von Deckschichten mittels Schallemissionsanalyse
Berichtsband 58 "Statusberichte zur Entwicklung und Anwendung der Schallemissionsanalyse", Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V. Berlin (1997) 235-237
M. Schütze, C. Bruns
Stresses and Adhesion of Surface Scales
in "Corrosion-Deformation Interactions", Ed. T. Magnin, EFC-Publ. No. 21, The Institute of Materials, London (1997) 308-318
M. Schütze, W. Przybilla
The role of stresses in oxidation and shape stability
in "Metal-supported automotive catalytic converters", Ed. H. Bode, Werkstoff-Informationsgesellschaft, Frankfurt am Main (1997) 163-177
W. Przybilla, M. Schütze
Monitoring stress relaxation processes in growing oxide scales via acoustic emission analysis
Proc. of the 23rd Europ. Conf. on Acoustic Emission Testing, Ed. P. Tscheliesnig, TÜV Österreich, Wien (1998) 74-79
M. Schütze
Mechanical Interactions in Oxide Scales
in "High Temperature Corrosion and Materials Chemistry", Eds. P.Y. Hou et al., The Electrochem. Soc., Pennington (1998) 1-17
M. Schmitz-Niederau, M. Schütze
Cracking and Healing of Oxide Scales on Ti-Al Alloys at 900°C
Oxidation of Metals 52 (1999) 241-276
C. Bruns, M. Schütze
Investigation of the Mechanical Properties of Oxide Scales on Nickel and TiAl
Oxidation of Metals 55 (2001) 35-68
M. Schütze
Hochtemperaturoxidation unter zyklischer Temperaturbeanspruchung
in "Korrosion und Korrosionsschutz", Ed. E. Kunze, Wiley-VCH, Weinheim (2001) 687-700
M. Schütze, S. Ito, W. Przybilla, H. Echsler, C. Bruns
Test Methods and Data on the Mechanical Properties of Protective Oxide Scales
Materials at High Temperatures 18 (2001) 39-50
W. Przybilla, M. Schütze
Role of growth stresses on the structure of oxide scales on nickel at 800 and 900°C
Oxidation of Metals 58 (2002) 103-145
W. Przybilla, M. Schütze
Growth stresses in the oxide scales on TiAl alloys at 800 and 900°C
Oxidation of Metals 58 (2002) 337-359
H. Echsler, M. Schütze, S. Ito
Deformation and fracture properties of oxide scales on mild steel at elevated temperatures
Current Advances in Materials and Processes (ISIJ) 16 (2003) 1329-1332
M. Schütze
Stress controlled mechanisms in the oxidation of metallic alloys
Proc. Int. Symp. "Corrosion Science in the 21st Century", UMIST, Manchester 2003 (CD), Journal of Corrosion Science and Engineering 6 (2003) 1-31
G. Wright, M. Schütze, S.R. Paterson, P.F. Tortorelli, R.B. Dooley
Progress in prediction and control of scale exfoliation on superheater and reheater alloys
Proc. EPRI International Conference on Boiler Tube and HRSG Tube Failures and Inspections, San Diego (2004)
M. Schütze
Modelling oxide scale fracture
Materials at High Temperatures 22 (2005) 147-154
M. Schütze, M. Malessa, D. Renusch, P.F. Tortorelli, I.G. Wright, R.B. Dooley
Mechanical Properties and Adherence of Oxide Scales
Materials Science Forum 522-523 (2006) 393
M. Schütze
Mechanical Properties of Oxide Scales as a Key Issue for Oxidation Resistance
Current Topics on High Temperature Materials 48 (2007) 301-313
I.G. Wright, M. Schütze, P.F. Tortorelli, R.B. Dooley
Towards improved prediction of scale exfoliation from steam tubes
Materials at High Temperatures 24 (2007) 265-274
M. Schütze, I. Wright, P. Tortorelli
Recent Advances in the quantitative characterisation of mechanical scale failure
J. Chinese Society for Corrosion and Protection 29 (2009) 313
M. Schütze, P.F. Tortorelli, I.G. Wright
Development of a comprehensive oxide scale failure diagram
Oxidation of Metals 73 (2010) 389-418
M. Rudolphi, M. Schütze
Investigations for the Validation of the Defect Based Scale Failure Diagrams - Part I: Nickel Oxide
Oxidation of Metals (2012) DOI 10.1007/s11085-012-9317-3

 

Ni-base Alloys and Coatings for Gas Turbines

B. Reppich, H. Bügler, R. Leistner, M. Schütze
Application of the Microstructural Concept of Creep and Rupture Life Time to a γ'-Precipitating Ni-Base Alloy I. Yielding and Creep Behaviour
in "Creep and Fracture of Engineering Materials and Structures", Eds. B. Wilshire & D. Owen, Pineridge Press, Swansea (1984) 279
M. Göbel, A. Rahmel, M. Schütze
The Isothermal and Cyclic Oxidation Behaviour of Single-Crystal Nickel Base Superalloys in Air Between 800-1150ºC
in "High Temperature Materials for Power Engineering 1990", Eds. E. Bachelet et al., Kluwer Academic Publ., Dordrecht (1990) 1225
M. Göbel, A. Rahmel, M. Schütze
High Temperature Oxidation of Single-Crystal Superalloys
Proc. Eurocorr '91, GTE, Budapest (1991) 269
M. Göbel, A. Rahmel, M. Schütze
The Isothermal-Oxidation Behavior of Several Nickel-Base Single-Crystal Superalloys With and Without Coatings
Oxidation of Metals 39 (1993) 231
M. Göbel, A. Rahmel, M. Schütze
The Cyclic-Oxidation Behavior of Several Nickel-Base Single-Crystal Superalloys Without and With Coatings
Oxidation of Metals 41 (1994) 271-300
M. Göbel, A. Rahmel, M. Schütze, M. Schorr, W.T. Wu
Interdiffusion Between the Platinum-Modified Aluminide coating RT22 and Nickel-based Single-Crystal Superalloys at 1000 and 1200ºC
Mater. High Temp. 12 (1994) 301-309
T. Link, A. Rahmel, M. Schütze
The Influence of Gaseous Impurities in Air on the High Temperature Corrosion of Coated and Uncoated Nickel-based Superalloys
Materials at High Temperatures 13 (1995) 55-66
A. Jeutter, M. Schütze
The Influence of HCl-containing Atmospheres on High Temperature Corrosion of Coated and Uncoated Nickel-Base Superalloys under Complex Loading Conditions
Proc. EUROMAT 97, Vol. 1, Netherlands Society for Materials Science, Zwijndrecht/NL (1997) 223-226
M. Schütze, A. Jeutter
High temperature corrosion resistance of gas turbine materials and coatings under the influence of Cl-contaminations
in "Materials for advanced power engineering 1998", Eds. J. Lecomte-Beckers et al., Series Energietechnik, Vol. 5, Forschungszentrum Jülich (1998) 1543-1552
A. Jeutter, M. Schütze
The Role of HCl Impurities in the Environment and Y for the High Temperature Corrosion of CoNiCrAl(Y)-Coatings on a Ni-base Superalloy under Complex Loading Conditions
Materials at High Temperatures 16 (1999) 71-86
A. Littner, M. Schütze
The cyclic oxidation behaviour of several new aluminide and platinum aluminide diffusion coatings at 1150°C
Proc. Int. Symp. "Corrosion Science in the 21st Century", UMIST, Manchester 2003 (CD), The Journal of Corrosion Science and Engineering, Vol. 6 (2003)
E. Berghof-Hasselbächer, A. Littner, M. Schütze, M. Schorr, P. Gawenda
Charakterisierung von Al- und PtAl-Diffusionsbeschichtungen auf Ni-Basis-Superlegierungen
Sonderbände der Praktischen Metallographie 35 (2004) 325-336
K. Aleksandrov, M. Schütze
Depletion sensor for protective high temperature coatings
Proc. EUROCORR 2009 (CD), Nice/F (2009)
E. Berghof-Hasselbächer, P.J. Masset, D. Texier, G. Schmidt, P. Gawenda, M. Jusek, M. Schütze
Mikrostrukturen von NiAl(1-x)Hf(x)-Legierungen (x=0…0,2)
Sonderbände der Praktischen Metallographie 41 (2009) 113-119
I. Teliban, C. Thede, S. Chemnitz, C. Bechtold, W.J. Quadakkers, M. Schütze, E. Quandt
Magnetic moment investigation by frequency mixing techniques
Review of Scientific Instruments 80 (2009) 115106
H.-E. Zschau, P.J. Masset, D. Renusch, M. Schütze
Thermodynamical Considerations for applying the Halogen Effect to Ni-Base Superalloys
Proc. TMS Spring Meeting, San Francisco/USA (2009) 149-156
H.-E. Zschau, D. Renusch, P.J. Masset, M. Schütze
A new concept of oxidation protection of Ni-base alloys by using the halogen effect
Materials at High Temperatures 26 (2009) 85-89
H.-E. Zschau, D. Renusch, P.J. Masset, M. Schütze
The halogen effect for Ni-base alloys - a new method for increasing the oxidation protection at high temperatures
Nuclear Instruments and Methods in Physics Research B 267 (2009) 1662-1665
H. Latreche, G. Bozzolo, P.J. Masset, T. Weber, M. Schütze
Measurements of the coefficient of thermal expansion (CTE) of NiAlMo alloys and comparison with modelling predictions
Materials Science and Engineering: A 527/21-22 (2010) 5837
H.-E. Zschau, P.J. Masset, M. Schütze
Thermodynamical Assessment of the Halogen Effect for Ni-based Superalloys
Proc. 1st International Conference on Materials for Energy, Karlsruhe, 4.-8. July 2010 A281-283
H.-E. Zschau, P.J. Masset, M. Schütze
The Halogen Effect for Ni-Base Superalloys - a Thermodynamic Study
Materials Science Forum 638-642 (2010) 2375-2380
H.-E. Zschau, P.J. Masset, M. Schütze
Screening of the Fluorination Parameters to Improve the Oxidation Resistance of Ni-Base Superalloys at Elevated Temperatures
ECS Transactions 25 (2010) 21-30
H.-E. Zschau, M. Schütze
Application of Accelerators in High Temperature Materials Research
Proc. International Topical Meeting on Nuclear Research Applications and Utilization of Accelerators, Wien/A, 4.-8. May 2009, IAEA, Wien (2010)
K. Aleksandrov, M. Schütze, I. Teliban, E. Quandt
Protective high temperature coatings with sensor function for residual life-time
Proc. EUROCORR 2011 (CD), Stockholm/SE (2011)
K. Aleksandrov, M. Schütze, I. Teliban, C. Thede, E. Quandt
Depletion sensor for protective high temperature coatings
Materials and Corrosion 62 (2011) 706-712
I. Teliban, C. Thede, S. Chemnitz, C. Bechtold, E. Quandt, T. Hüttel, W. Quadakkers, K. Aleksandrov, M. Schütze
Sensor for monitoring the depletion state of high temperature protective coatings
Proc. EUROCORR 2011 (CD), Stockholm/SE (2011)
H.-E. Zschau, M. Schütze
Oxidation Protection of Titanium Aluminides and Ni-base Superalloys at high Temperatures by the Halogen Effect - Principles and Applications
Materials Science Forum 696 (2011) 366-371
G. Bonnet, M. Mollard, B. Rannou, J. Balmain, F. Pedraza, X. Montero, M. Galetz, M. Schütze
Initial Aluminizing Steps of Pure Nickel from Al Micro-Particles
Defect and Diffusion Forum 323-325 (2012) 381-386
M.C. Galetz, X. Montero, H. Murakami
Novel processing in inert atmosphere and in air to manufacture high-activity slurry aluminide coatings modified by Pt and Pt/Ir
Materials and Corrosion 63 (2012) 921-928
H.-E. Zschau, M. Schütze
Potential of the Halogen Effect for the Formation of a Protective Alumina Scale on Ni-base Superalloys
Proceedings "Superalloys 2012: The 12th International Symposium on Superalloys". Ed. E.S. Huron, R.C. Reed, M.C. Hardy, M.J. Mills, R.E. Montero, P.D. Portella, J. Telesman, TMS (The Minerals, Metals and Materials Society), 733-739
H.-E. Zschau, M. Schütze
Surface Modification by Ion Implantation to improve the Oxidation Resistance of Materials for High Temperature Technology
in "Ion Implantation", Ed. M.S. Goorsky, InTech, Rijeka (2012) 409-436

 

Thermal Barrier Coatings

F. Dettenwanger, H. Echsler, C. Bruns, M. Schütze
Investigation of Damage Mechanisms in Thermal Barrier Coatings by Acoustic Emission
in "Elevated Temperature Coatings: Science and Technology III", Eds. J.M. Hampikian, N.B. Dahotre, TMS, Warrendale (1999)
H. Echsler, W. Przybilla, M. Schütze
Investigation of Bondcoat Oxidation and of Mechanical Behaviour of the Bondcoat Oxide for Life Time Prediction of TBC Systems
Proc. Eurocorr 2000 (CD), London
E. Berghof-Hasselbächer, H. Echsler, P. Gawenda, M. Schorr, M. Schütze
Zeit- und temperaturabhängige Entwicklung von physikalischen Defekten in Wärmedämmschichtsystemen
Sonderbände der Praktischen Metallographie 33 (2001) 275-281
R. Herzog, S. Heckmann, R. Steinbrech, D. Sebold, W.J. Quadakkers, F. Schubert, L. Singheiser, H. Echsler, M. Schütze
Contribution to Life Prediction of Thermal Barrier Coatings: A Concept of Accumulated Damage
Proceedings of Materials Week 2001, 1-4 October 2001, Munich
D. Renusch, H. Echsler, M. Schütze
New approaches to the understanding of failure and lifetime prediction of thermal barrier coating systems
in "Lifetime modelling of high temperature corrosion processes", Eds. M. Schütze, W.J. Quadakkers, J.R. Nicholls, Maney Publ., London (2001) 324-336
H. Echsler, D. Renusch, M. Schütze
Kinetics of the evolution of physical defects in the TGO and its vicinity for life time prediction of TBC systems
in "Advanced Thermal Barrier Coatings and Titanium Aluminides for Gas Turbines", DLR, Bonn (2002) 152-156
V. Gauthier, M. Schütze
Oxidation behaviour of γ-TiAl coated with zirconia thermal barriers
in "Advanced Thermal Barrier Coatings and Titanium Aluminides for Gas Turbines", DLR, Bonn (2002) 215-218
V. Gauthier, F. Dettenwanger, M. Schütze
Oxidation behavior of γ-TiAl coated with zirconia thermal barriers
Intermetallics 10 (2002) 667-674
R. Herzog, P. Majerus, E. Trunova, H. Echsler, R.W. Steinbrech, W.J. Quadakkers, F. Schubert, L. Singheiser, H. Echsler, M. Schütze,M.
Plasma-Sprayed Thermal Barrier Coatings for Gas Turbine Components - Degradation Parameters and Modelling Approach
Proceedings of the 2nd International Symposium on Integral Materials Modelling, September 2002, Aachen, Germany
D. Renusch, H. Echsler, M. Schütze
Life time modeling of APS-TBC by using acoustic emission analysis
in "Advanced Thermal Barrier Coatings and Titanium Aluminides for Gas Turbines", DLR, Bonn (2002) 48-52
E. Berghof-Hasselbächer, H. Echsler, P. Gawenda, M. Schorr, M. Schütze
Time and temperature dependent development of physical defects in thermal barrier coating systems
Practical Metallography 40 (2003) 219-231
M. Schütze, D. Renusch, H. Echsler
The influence of oxidation on the life time of thermal barrier coatings
Corrosion 2003, Paper no. 03509, NACE, Houston (2003)
H. Echsler, D. Renusch, M. Schütze
Bond coat oxidation and its significance for life expectancy of thermal barrier coating systems
Materials science and technology 20 (2004) 307-318
H. Echsler, D. Renusch, M. Schütze
Mechanical behaviour of as sprayed and sintered air plasma sprayed partially stabilised zirconia
Materials science and technology 20 (2004) 869-876
D. Renusch, H. Echsler, M. Schütze
Progress in life time modeling of APS-TBC, Part I: residual, thermal and growth stresses including the role of thermal fatigue
Materials at High Temperatures 21 (2004) 65-76
D. Renusch, H. Echsler, M. Schütze
Progress in life time modeling of APS-TBC, Part II: Critical strains, macro-cracking, and thermal fatigue
Materials at High Temperatures 21 (2004) 77-86
D. Renusch, H. Echsler, M. Schütze
The role that interacting failure mechanisms have on the lifetime of APS-TBC under oxidizing conditions
Materials Science Forum 461-464 (2004) 729-736
H.-E. Zschau, M. Dietrich, D. Renusch, M. Schütze, J. Meijer, H.-W. Becker
Detection of Hydrogen in Hidden and Spalled Layers of Turbine Blade Coatings
Nuclear Instruments & Methods in Physics Research B 249 (2006) 381-383
D. Renusch, M. Schütze
Measuring and modeling the TBC damage kinetics by using acoustic emission analysis
Surface & Coatings Technology 202 (2007) 740-744
D. Renusch, M. Schütze
A prototype software tool for life time assessment of thermal barrier coating systems
Materials Science Forum 595-598 (2008) 151-158
D. Renusch, M. Schütze
The role that bond coat depletion of aluminum has on the lifetime of APS-TBC under oxidizing conditions
Materials and Corrosion 59 (2008) 547-555
M. Rudolphi, D. Renusch, M. Schütze
Verification of moisture-induced delayed failure of thermal barrier coatings
Scripta Materialia 59 (2008) 255-257
M. Rudolphi, D. Renusch, H.-E. Zschau, M. Schütze
Hydrogen detection in buried layers of thermal barrier coatings
Materials Science Forum 595-598 (2008) 177-184
M. Rudolphi, D. Renusch, H.-E. Zschau, M. Schütze, J. Meijer
The effect of moisture on the delayed spallation of thermal barrier coatings
Materials at High Temperatures 26 (2009) 325-329
H. Aleksanoglu, M. Rudolphi, D. Renusch, T.S. Mao, A. Scholz, C. Berger, M. Schütze
Untersuchung der Rissausbreitung in Wärmedämmschichtsystemen unter thermomechanischer Beanspruchung
Tagungsband FVV Informationstagung Turbomaschinen, Heft R552 (2010) 131-158
D. Renusch, M. Rudolphi, M. Schütze
Software tools for lifetime assessment of thermal barrier coatings, Part I - Thermal ageing failure and thermal fatigue failure
Journal of Solid Mechanics and Materials Engineering 4 (2010) 143-154
D. Renusch, M. Rudolphi, M. Schütze
Software tools for lifetime assessment of thermal barrier coatings, Part II - Bond coat aluminum depletion failure
Journal of Solid Mechanics and Materials Engineering 4 (2010) 155-166
M. Schütze, M. Rudolphi
Prediction of Mechanical Scale Failure - Current Status and Perspectives
Materials Science Forum 696 (2011) 138-143

 

Coatings for Thermal Power Stations

G. Strehl, V. Guttmann, D. Naumenko, A. Kolb-Telieps, G. Borchardt, W.J. Quadakkers, J. Klöwer, P.A. Beaven, J.R. Nicholls
The influence of sample geometry on the oxidation and chemical failure of FeCrAl(RE) alloys
in "Lifetime modelling of high temperature corrosion processes", Eds. M. Schütze, W.J. Quadakkers, J.R. Nicholls, Maney Publ., London (2001) 107-122
V. Rohr, A. Donchev, M. Schütze
Diffusion coatings for the high temperature corrosion protection of 9-12% Cr steels
Proc. EUROCORR 2004 Nice/F (CD) (2004), paper no. 237
V. Rohr, M. Schütze
Diffusion coatings for heat exchanger materials
Surface Engineering 20 (2004) 266-274
V. Rohr, M. Schütze
Novel low temperature diffusion coatings for heat exchanger materials
Materials Science Forum 461-464 (2004) 401-408
E. Huttunen-Saarivirta, S. Kalidakis, F.H. Stott, V. Rohr, M. Schütze
The erosion-corrosion resistance of uncoated and aluminized 12% chromium ferritic steels under fluidized-bed conditions at elevated temperature
Materials and Corrosion 56 (2005) 897-906
J. Kalivodova, D. Baxter, M. Schütze, V. Rohr
Gaseous corrosion of alloys and novel coatings in simulated environments for coal, waste and biomass boilers
Materials and Corrosion 56 (2005) 882-889
A. Littner, F. Pedraza, A.D. Kennedy, P. Moretto, L. Peichl, T. Weber, M. Schütze
Performance and thermal stability of Pt-modified Al-diffusion coatings for superalloys under cyclic and isothermal conditions
Proceedings of the sixth international conference on the Microscopy of Oxidation, Birmingham, 4.-6. April 2005, Eds. G.J. Tatlock, H.E. Evans (2005) 245-254
L. Nieto Hierro, V. Rohr, P.J. Ennis, M. Schütze, W.J. Quadakkers
Steam oxidation and its potential effects on creep strength of power station materials
Materials and Corrosion 56 (2005) 890-896
V. Rohr, A. Donchev, M. Schütze, A. Milewska, F.J. Pérez
Diffusion coatings for high temperature corrosion protection of 9-12%Cr steels
Corrosion Engineering, Science and Technology 40 (2005) 226-232
V. Rohr, M. Schütze, E. Fortuna, D.N. Tsipas, A. Milewska, F.J. Perez
Development of novel diffusion coatings for 9-12% Cr ferritic-martensitic steels
Materials and Corrosion 56 (2005) 874-881
V. Rohr, M. Schütze, P. Maugis, D. Poquillon, D. Monceau
Mechanism of the pack cementation process at low temperature on 9% Cr steels
Proc. Eurocorr 2005, Lissabon 2005 (CD)
T. Weber, M. Schütze
Diffusion coatings for corrosion protection of high temperature structural materials
Defect and Diffusion Forum 237-240 (2005) 922-927
E. Berghof-Hasselbächer, V. Rohr, E. Nicolas, M. Schütze
The determination of Al-diffusion layer thickness by image processing
Practical Metallography 43 (2006) 127-142
E. Huttunen-Saarivirta, V. Rohr, F.H. Stott, M. Schütze
Influence of glass bead blasting of 9%Cr steel substrate on development of aluminide diffusion coatings
Surface Engineering 22 (2006) 472-480
E. Huttunen-Saarivirta, F.H. Stott, V. Rohr, M. Schütze
Particle angularity effects on the elevated-temperature erosion-oxidation behaviour of aluminium diffusion
Wear 261 (2006) 746-759
L. Niewolak, M. Malessa, S. Y. Coleman, W. J. Quadakkers, M. Schütze
Influence of cycling parameter variation on thermal cyclic oxidation testing of high temperature materials (COTEST)
Materials and Corrosion 57 (2006) 31-42
E. Huttunen-Saarivirta, F.H. Stott, V. Rohr, M. Schütze
Erosion-oxidation behavior of chromized-aluminized 9% chromium steel under fluidized-bed conditions at elevated temperature
Oxidation of Metals 68 (2007) 113-132
E. Huttunen-Saarivirta, F.H. Stott, V. Rohr, M. Schütze
Erosion-oxidation behaviour of pack-aluminized 9% chromium steel under fluidized-bed conditions at elevated temperature
Corrosion Science 49 (2007) 2844-2865
E. Huttunen-Saarivirta, S. Kalidakis, F.H. Stott, V. Rohr, M. Schütze
Erosion-Oxidation of Uncoated, Aluminized and Chromized-Aluminized 9Cr-1Mo Steels Under Fluidized-Bed Conditions at 550°C to 700°C
Tribology International 43 (2010) 161-170
X. Montero, M. Galetz, M. Schütze
A single step process to form in-situ an alumina foam/aluminide TBC system for alloys in extreme environments at high temperatures
Surface and Coatings Technology, In Press, Corrected Proof, Available online 20 June 2011

 

Materials and Coatings for Sulfidizing Environments

B. Glaser, M. Schütze, F. Vollhardt
Auswertung von Daten zum H2S-Angriff auf Stähle bei verschiedenen Temperaturen und Konzentrationen
Chem. Ing. Techn. 63 (1991) 634
M. Schulte, M. Schütze
Sulfide Scales for the Protection of Steels in H2S-Containing Atmospheres
in "Corrosion Control for Low-Cost Reliability", NACE, Houston 1993
M. Schulte, M. Schütze
The Behaviour of Protective Sulfide Scales on Various Steels in H2S-Containing Atmospheres during Temperature Changes
in "Progress in the Understanding and Prevention of Corrosion", Eds. J.M. Costa, A.D. Mercer, The Institute of Materials, London (1993) 750
M. Schütze
Einfluß von Temperaturänderungen auf das Verhalten schützender Sulfidschichten
Materials and Corrosion 47 (1996) 103-105
M. Schütze, M. Nöth
The Sulfidation Resistance of Several Fe- and Ni-Base Alloys and of Two Intermetallics in Atmospheres Containing H2S at 400-700ºC
Proc. 13th ICC, Australasian Corrosion Association, Melbourne (1996) 1534-1542
K. Rahts, M. Nöth, M. Schulte, M. Schorr, P. Gawenda, M. Schütze
Untersuchungen an Sulfidschichten verschiedener Hochtemperaturwerkstoffe aus thermischer Beanspruchung in H2S-haltiger Atmosphäre
Sonderbände der Praktischen Metallographie 28 (1997) 229-236
M. Schütze, M. Nöth
Materials for High Temperature Sulfidation Resistant Coatings
Proc. EUROCORR '97, NKF, Oslo (1997) 79-84
M. Schütze, M. Nöth
Protective Coatings for High Temperatures and High Sulfur-Low Oxygen Environments
in "Corrosion 98", NACE Houston (1998) 188/1-14
M. Schulte, A. Rahmel, M. Schütze
The Sulfidation Behavior of Several Commercial Ferritic and Austenitic Steels
Oxidation of Metals 49 (1998) 33-70
J. Jimenez Soler, J.F. Norton, M. Nöth, M. Schütze
The Corrosion Behaviour of a TiAl Coating Exposed to a Simulated Dry-feed Entrained Slagging Coal Gasifier Atmosphere Containing 0.8 % H2S at 600°C
Materials and Corrosion 50 (1999) 373-446
M. Schulte, M. Schütze
The Role of Scale Stresses in the Sulfidation of Steels
Oxidation of Metals 51 (1999) 55-77
T. Weber, M. Schütze
Development of Protective Coatings for Reducing Environments at High Temperatures
in CORROSION 99, Paper No. 72, NACE, Houston (1999)
T. Weber, M. Schütze
Protective Coatings for Reducing and Sulfidizing Environments
in "Solution of Corrosion Problems in Advanced Technologies", Eds. G. Schmitt, M. Schütze, Chapter 2/6, DECHEMA, Frankfurt am Main (1999)
T. Weber, M. Schütze
Protective Coatings for Reducing Sulfidizing Environments at High Temperatures
Proc. China International Corrosion Control Conference '99 (CICCC'99), Eds. Z. Ren et al., China Chemical Anticorrosion Technology Association, Beijing (1999) 359-363
B. Aumüller, T. Weber, M. Schütze
Verfahrenstechnische Aspekte und Schutzwirkung von thermisch gespritzten TiAl-Schutzschichten für reduzierende Atmosphären
in "Schutzschichten für Hochtemperaturanwendungen", FDS, Dresden (2000)
T. Weber, M. Schütze
Coatings against high temperature H2S-Corrosion
Proc. EUROCORR 2001 (CD) Associazione Italiana di Metallurgia, Milano (2001)
B. Aumüller, T. Weber, M. Schütze
Thermal spray coatings for reducing sulfidizing atmospheres at high temperatures
Proc. Int. Thermal Spray Conference 2002, Ed. E. Lugscheider, DVS-Verlag, Düsseldorf (2002)
M. Schütze
High temperature corrosion - A materials challenge in modern high temperature technology
Ochrona przed korozja 45 (2002) 87-96
T. Weber, C. Rosado, M. Schütze
Development of Coatings for Environments with high sulfur and/or carbon activities at low oxygen potentials
CORROSION 2002, NACE, Houston (2002) 02371/1-12
M. Schütze, M. Spiegel
Korrosion in Anlagen zur thermischen Abfallverwertung
Proc. Jahrestagung 2004 der GfKORR - Gesellschaft für Korrosionsschutz e.V., Korrosionsschutz in der Chemieindustrie (CD), GfKORR, Frankfurt am Main (2004)
T. Weber, M. Schütze
Kodiffusionsschichten aus Aluminium, Silizium und Titan zur Verbesserung der Hochtemperatur-Korrosionsbeständigkeit von Apparatebauwerkstoffen
in "Neue Materialien und Verfahren in der Beschichtungstechnik", Tagungsband zum 7. Werkstofftechnischen Kolloquium, Hrsg. B. Wielage, Chemnitz (2004) 181-186
M. Schütze, M. Malessa, V. Rohr, T. Weber
Development of Coatings for Protection in Specific High Temperature Environments
Surface & Coatings Technology 201 (2006) 3872-3879
M. Schütze, H.K. Steinberg
Ursachen und Mechanismen der Korrosion in thermischen Anlagen
Verfahren & Werkstoffe für die Energietechnik: Korrosion in Anlagen zur regenerativen Energieerzeugung, Eds. M. Faulstich, D. Bendix, Förster Verl., Sulzbach-Rosenberg 2 (2006) 25-50
M. Schütze
Corrosion Resistance at elevated temperatures in highly aggressive environments
CORROSION 63 (2007) 4-18
B. Rammer, T. Weber, M. Schütze
Diffusion coatings for aggressive high-temperature process environments
Proc. EUROCORR 2008 (CD), Edinburgh/UK (2008)

 

Materials and Coatings for Carburizing and Metal Dusting Environments

U.J. Brand, H.-E. Bühler, P. Karduck, S. Köhler, E. Berghof-Hasselbächer, M. Schütze
Damage Caused by Oxidation and Carburisation at a Valve of a Dehydrating Unit
Practical Metallography 36 (1999) 405-422
U.J. Brand, H.-E. Bühler, P. Karduk, S. Köhler, E. Berghof-Hasselbächer, M. Schütze
Investigations of a Valve Damaged by Oxidation and Carburisation
in "Solution of Corrosion Problems in Advanced Technologies", Eds. G. Schmitt, M. Schütze, Chapter 2/27, DECHEMA, Frankfurt am Main (1999)
F. Dettenwanger, D. Grotmann, H. Friedrich, E. Berghof-Hasselbächer, M. Schorr, M. Schütze
Damage of a Heat-treatment Retort by Metal Dusting Attack
Materials and Corrosion 50 (1999) 289-293
C. Rosado, F. Dettenwanger, M. Schütze
Development of coatings against metal dusting attack
Proc. Int. Workshop Metal Dusting, 2000, Argonne National Lab., Argonne (2001) 213-224
C. Rosado, F. Dettenwanger, M. Schütze
Protection of steels against metal dusting attack by coatings
Proc. EUROCORR 2001 (CD) Associazione Italiana di Metallurgia, Milano (2001)
M. Schütze, C. Rosado, F. Dettenwanger
Protection of steels against metal dusting attack by coatings
Proc. Stainless Steel World 2001, KCI Publishing, Zutphen/NL (2001) 306-314
E. Berghof-Hasselbächer, H.-E. Bühler, O. Greven, M. Schorr, J. Schürhoff, M. Schütze
Investigations on Component Failure of Grate Systems During Residual Wood Combustion
Practical Metallography 39 (2002) 369-386
E. Berghof-Hasselbächer, C. Rosado Sainz-Rosas, M. Schütze
Korrosionsschutzschichten gegen Metal Dusting Angriff
Sonderbände der Praktischen Metallographie 34, Ed. G. Petzow, Werkstoff-Informationsgesellschaft, Frankfurt am Main (2002) 271-281
M. Schütze
High temperature corrosion - A materials challenge in modern high temperature technology
Ochrona przed korozja 45 (2002) 87-96
T. Weber, C. Rosado, M. Schütze
Development of Coatings for Environments with high sulfur and/or carbon activities at low oxygen potentials
CORROSION 2002, NACE, Houston (2002) 02371/1-12
E. Berghof-Hasselbächer, C. Rosado Sainz-Rozas, M. Schütze
Protective Coatings to Prevent Metal Dusting
Practical Metallography 40 (2003) 407-419
M. Schütze
Metal Dusting, Carburization and Nitridation
Materials and Corrosion 54 (2003) 735
Protective behaviour of newly developed coatings against metal dusting
Materials and Corrosion 54 (2003) 831-854
T. Weber, M. Schütze
Kodiffusionsschichten aus Aluminium, Silizium und Titan zur Verbesserung der Hochtemperatur-Korrosionsbeständigkeit von Apparatebauwerkstoffen
in "Neue Materialien und Verfahren in der Beschichtungstechnik", Tagungsband zum 7. Werkstofftechnischen Kolloquium, Hrsg. B. Wielage, Chemnitz (2004) 181-186
M. Schütze, M. Malessa, V. Rohr, T. Weber
Development of Coatings for Protection in Specific High Temperature Environments
Surface & Coatings Technology 201 (2006) 3872-3879
M. Schütze, H.K. Steinberg
Ursachen und Mechanismen der Korrosion in thermischen Anlagen
Verfahren & Werkstoffe für die Energietechnik: Korrosion in Anlagen zur regenerativen Energieerzeugung, Eds. M. Faulstich, D. Bendix, Förster Verl., Sulzbach-Rosenberg 2 (2006) 25-50
D. Röhnert, F. Phillipp, H. Reuther, T. Weber, E. Wessel, M. Schütze
Initial Stages in the Metal-dusting Process on Alloy 800
Oxidation of Metals 68 (2007) 271-293
D. Röhnert, M. Schütze, T. Weber
Performance of several nickel base alloys in metal dusting atmospheres
NACE Corrosion 2007, Paper 074175/1-16
C. Rosado, M. Schütze
Protective behaviour of newly developed coatings against metal dusting
in "Corrosion by carbon and nitrogen: Metal dusting, carburisation and nitridation", Hrsg. H.J. Grabke, M. Schütze, Woodhead Publishing, Cambridge (2007) 103-153
M. Schütze
Corrosion Resistance at elevated temperatures in highly aggressive environments
CORROSION 63 (2007) 4-18
C. Geers, T. Weber, M. Schütze
New approach for the inhibition of carbon deposition on steel surfaces under metal dusting conditions
Proc. EUROCORR 2008 (CD), Edinburgh/UK (2008)
B. Rammer, T. Weber, M. Schütze
Diffusion coatings for aggressive high-temperature process environments
Proc. EUROCORR 2008 (CD), Edinburgh/UK (2008)
C. Geers, M. Schütze
New surface protection system against Metal Dusting
Proc. NACE 2009 (CD), Atlanta/GA/USA (2009)
C. Geers, M. Schütze
Non-oxidizing intermetallic phases as an alternative to oxide forming coatings against coking and metal dusting
Proc. Aachener-Ölwärme-Kolloquium 2009, Shaker-Verlag, Aachen (2009) 204
C. Geers, M. Schütze
Selective inhibition of metals on material surfaces catalyzing the metal dusting process
ECS Transactions 25 (2009) 71-76
C. Geers, M. Schütze
Behavior of nickel-tin coated high temperature materials exposed under metal dusting conditions
Proc. NACE 2011 (CD), Houston/TX/USA (2011)
C. Geers, M. Schütze
Lifetime Extension of Alloys for Metal Dusting Applications
Proc. EUROCORR 2011 (CD), Stockholm/SE (2011)
D.J. Young, J. Zhang, C. Geers, M. Schütze
Recent advances in understanding metal dusting: A review
Materials and Corrosion 62 (2011) 7-28
C. Geers, M. Galetz, M. Schütze
Investigation of the effect of the alloy 600 substrate for the stability of a Ni3Sn2 coating for metal dusting protection at 620°C
Surf. Coat. Tech. 215 (2013) 2-6

 

Materials and Coatings for Halogen-containing Environments

M. Schütze, P. Simon
Materials for Use in Atmospheres Containing HF in a Pyrohydrolysis Plant for Re-Processing Spent Pot Lining from Aluminium Production
Materials and Corrosion 45 (1994) 435-443
M. Schütze, B. Glaser
The Influence of Cl-Containing Atmospheres on Creep Crack Growth at 800ºC
in "Heat-Resistant Materials II", Eds. K. Natesan et al., ASM International, Materials Park (Ohio) (1995) 343-351
A. Jeutter, M. Schütze
The Influence of HCl-containing Atmospheres on High Temperature Corrosion of Coated and Uncoated Nickel-Base Superalloys under Complex Loading Conditions
Proc. EUROMAT 97, Bd. 1, Netherlands Society for Materials Science, Zwijndrecht/NL (1997) 223-226
K. Rahts, M. Schorr, C. Schwalm, M. Schütze
Untersuchungen über den Einfluß von Chlor bei der Hochtemperaturoxidation
Practical Metallography 29 (1998) 305-311
M. Schütze, A. Jeutter
High temperature corrosion resistance of gas turbine materials and coatings under the influence of Cl-contaminations
in "Materials for advanced power engineering 1998", Eds. J. Lecomte-Beckers et al., Series Energietechnik, Vol. 5, Forschungszentrum Jülich (1998) 1543-1552
R. Bender, M. Schütze
Corrosion Behaviour of Several Commercial Alloys in Oxidizing-Chloridizing Gas Mixtures at 650 to 1000°C
in "Solution of Corrosion Problems in Advanced Technologies", Eds. G. Schmitt, M. Schütze, Chapter 2/14, DECHEMA, Frankfurt am Main (1999)
A. Jeutter, M. Schütze
The Role of HCl Impurities in the Environment and Y for the High Temperature Corrosion of CoNiCrAl(Y)-Coatings on a Ni-base Superalloy under Complex Loading Conditions
Materials at High Temperatures 16 (1999) 71-86
K. Rahts, M. Schorr, C. Schwalm, M. Schütze
Water-free Methods of Preparation for the Analysis of Chlorides in the High Temperature Oxidation in Chlorine Containing Atmospheres
Practical Metallography 36 (1999) 86-97
R. Bender, M. Schütze
Oxidation Behavior of Several Commercial Alloys in Chlorine-Containing High Temperature Environments
CORROSION 2000, Paper No. 239, NACE, Houston (2000)
C. Schwalm, M. Schütze
The Corrosion Behavior of Several Heat Resistant Materials in Air + 2 Vol-% Cl2 at 300 to 800°C Part I - Fe-Base and Fe-Containing Alloys
Materials and Corrosion 51 (2000) 34-49
C. Schwalm, M. Schütze
The Corrosion Behavior of Several Heat Resistant Materials in Air + 2 Vol-% Cl2 at 300 to 800°C Part 2 - Nickel Base Alloys
Materials and Corrosion 51 (2000) 73-79
C. Schwalm, M. Schütze
The Corrosion Behavior of Several Heat Resistant Materials in Air + 2 Vol-% Cl2 at 300 to 800°C Part 3 - Alumina Formers and Intermetallics
Materials and Corrosion 51 (2000) 161-172
R. Bender, M. Schütze
Corrosion behaviour of several commercial alloys in oxidizing-chloridizing environments at 650-1000°C
Proc. EUROCORR 2001 (CD), Associazione Italiana di Metallurgia, Milano (2001)
M. Schütze, R. Bender
Hochtemperaturkorrosion in chlorhaltigen Atmosphären - Leistungsfähigkeit metallischer Werkstoffe und Möglichkeiten zur Erhöhung der Beständigkeit
in "Hochlegierte Werkstoffe - Korrosionsverhalten und ihre Anwendung", Vol. 3, TAW-Verlag, Wuppertal (2001)
M. Schütze
High temperature corrosion - A materials challenge in modern high temperature technology
Ochrona przed korozja 45 (2002) 87-96
R. Bender, M. Schütze
The role of alloying elements in commercial alloys for corrosion resistance in oxidizing-choridizing atmospheres Part I: Literature evaluation and thermodynamic calculations on phase stabilities
Materials and Corrosion 54 (2003) 567-586
R. Bender, M. Schütze
The role of alloying elements in commercial alloys for corrosion resistance in oxidizing-chloridizing atmospheres - Part 2: Experimental investigations
Materials and Corrosion 54 (2003) 652-686
M. Schütze, M. Spiegel
Korrosion in Anlagen zur thermischen Abfallverwertung
Proc. Jahrestagung 2004 der GfKORR - Gesellschaft für Korrosionsschutz e.V., Korrosionsschutz in der Chemieindustrie (CD), GfKORR, Frankfurt am Main (2004)
T. Weber, R. Bender, M. Schütze
Hochtemperaturkorrosion in chlorhaltiger Verbrennungsatmosphäre - Schutzkonzepte für metallische Werkstoffe
Optimierung der Abfallverbrennung 1, K.J. Thomé-Kozmiensky (Ed.), TK-Verlag, Neuruppin (2004) 581-598
M. Schütze, M. Malessa, V. Rohr, T. Weber
Development of Coatings for Protection in Specific High Temperature Environments
Surface & Coatings Technology 201 (2006) 3872-3879
M. Schütze, H.K. Steinberg
Ursachen und Mechanismen der Korrosion in thermischen Anlagen
Verfahren & Werkstoffe für die Energietechnik: Korrosion in Anlagen zur regenerativen Energieerzeugung, Eds. M. Faulstich, D. Bendix, Förster Verl., Sulzbach-Rosenberg 2 (2006) 25-50
H. Latreche, G. Tegeder, G. Wolf, P.J. Masset, T. Weber, M. Schütze
High temperature corrosion behaviour of NiAlMo APS-coatings in chlorine-based atmospheres
Proc. EUROCORR 2007 (CD), Freiburg (2007)
M. Schütze
Corrosion Resistance at elevated temperatures in highly aggressive environments
CORROSION 63 (2007) 4-18
H. Latreche, S. Doublet, G. Wolf, G. Tageder, P.J. Masset, T. Weber, M. Schütze
Behaviour of NiAl APS-coatings in chlorine-containing atmospheres
Materials and Corrosion 59 (2008) 573-583
Proc. NACE Corrosion 2008, New Orleans/USA (2008)
H. Latreche, G. Tegeder, G. Wolf, P.J. Masset, T. Weber, M. Schütze
New approaches to improve high temperature corrosion resistance in chlorine-based atmospheres
Materials Science Forum 595-598 (2008) 307-321
B. Rammer, T. Weber, R. Bender, M. Schütze
Material solutions for the thermal treatment in high chlorine environments
Proc. NACE Corrosion 2008, New Orleans/USA (2008)
B. Rammer, T. Weber, M. Schütze
Diffusion coatings for aggressive high-temperature process environments
Proc. EUROCORR 2008 (CD), Edinburgh/UK (2008)
B. Rammer, T. Weber, M. Schütze
Entwicklung von Diffusionsschichten auf Nickelbasiswerkstoffen für den Einsatz in chlorhaltigen Hochtemperaturprozessen
Mat.-wiss. u. Werkstofftech. 39 (2008) 29-32
E. Berghof-Hasselbächer, P.J. Masset, D. Texier, G. Schmidt, P. Gawenda, M. Jusek, M. Schütze
Mikrostrukturen von NiAl(1-x)Hf(x)-Legierungen (x=0…0,2)
Sonderbände der Praktischen Metallographie 41 (2009) 113-119
H. Latreche, S. Doublet, M. Schütze
Development of Corrosion Assessment Diagrams for High Temperature Chlorine Corrosion. Part I: State of the Art and Development of the Basis for a New Extended Approach
Oxidation of Metals 72 (2009) 1-30
H. Latreche, S. Doublet, M. Schütze
Development of Corrosion Assessment Diagrams for High Temperature Chlorine Corrosion. Part II: Development of "Dynamic" Quasi-stability Diagrams
Oxidation of Metals 72 (2009) 31-65
P.J. Masset, D. Texier, M. Schütze
Coefficients of thermal expansion of (Ni0.5Al0.5)1-xHfx alloys (x = 0 ... 0.2)
Materials Science and Technology 25 (2009) 874-879
B. Rammer, T. Weber, M. Schütze
Diffusion coatings for aggressive high temperature process environments
Corrosion Engineering, Science and Technology 44 (2009) 227-233
B. Rammer, T. Weber, M. Schütze
Diffusion coatings for oxidizing high-chlorine environments at elevated temperatures
Proc. ICMCTF 2009, San Diego/USA (2009)
B. Rammer, M. Schütze
A New Coating Concept for Oxidizing High Chlorine Environments
Proc. NACE Corrosion 2011, Houston/USA (2011)
M.C. Galetz, J.T. Bauer, M. Schütze, M. Noguchi, C. Takatoh, H. Cho
The influence of copper in ash deposits on the corrosion of boiler tube alloys for waste-to-energy plants
Materials and Corrosion (2012) DOI: 10.1002/maco.201206787

 

Titanium Aluminides

S. Becker, A. Rahmel, M. Schorr, M. Schütze
Mechanism of Isothermal Oxidation of the Intermetallic TiAl and of TiAl Alloys
Oxidation of Metals 38 (1992) 425-464
S. Becker, M. Schütze, A. Rahmel
Cyclic-Oxidation Behavior of TiAl and of TiAl Alloys
Oxidation of Metals 39 (1993) 93-106
M. Schütze, M. Schmitz
The Oxidation Behaviour of Titanium Aluminide under the Effect of Mechanical Stresses
Trans. Mat. Res. Soc. Jpn. 14A (1994) 219-224
A. Rahmel, W.J. Quadakkers, M. Schütze
Fundamentals of TiAl Oxidation - A Critical Review
Materials and Corrosion 46 (1995) 271-285
K. Rahts, M. Schorr, M. Schütze, M. Schmitz-Niederau
Darstellung von Oxidschichten und Gefüge von TiAl-Legierungen aus Hochtemperaturversuchen
Practical Metallography 27 (1995) 561-565
M. Schütze, M. Schmitz-Niederau
Interaction of Mechanical Loading and Oxidation at 900ºC for TiAl
in "Gamma Titanium Aluminides", Eds. Y.-W. Kim, R. Wagner, M. Yamaguchi, TMS Warrendale (1995) 83-92
C. Lang, M. Schütze
TEM Investigations of the Early Stages of TiAl Oxidation
Oxidation of Metals 46 (1996) 255-285
M. Schütze
Intermetallic Titanium Aluminides - Importance of Oxidation Resistance for Applications
Proc. Conf. Corrosion '96 - Theory and Practice, Ed. R. Juchniewicz, Politechnika Gdanska, Gdansk (1996) 41-58
M. Hald, M. Schütze
Isothermal Oxidation of P/M-TiAl Alloys
Materials Science Forum 251-254 (1997) 179-186
C. Lang, M. Schütze
Die Mechanismen der Anfangsoxidation und ihre Auswirkungen auf die Oxidationsbeständigkeit von Titanaluminiden
Proc. Werkstoffwoche 96, Eds. F. Aldinger, H. Mughrabi (1997) 871-876
C. Lang, M. Schütze
The Initial Stages in the Oxidation of TiAl
Materials and Corrosion 48 (1997) 13-22
M. Schütze, M. Hald
Improvement of the Oxidation Resistance of TiAl Alloys by Using the Chlorine Effect
Materials Science and Engineering A 239-240 (1997) 847-858
M. Schütze, M. Hald, C. Lang. S. Melsheimer, A. Rahmel
Intermetallic disilicides and titanium aluminides - a new class of structural high temperature materials under the aspect of their high temperature oxidation resistance
Pure & Appl. Chem. 69 (1997) 2335-2341
G. Schumacher, F. Dettenwanger, M. Hald, C. Lang, M. Schütze
The microalloying effect in the oxidation of TiAl-alloys
in "Solutions to corrosion problems", Jaarbeurs, Utrecht (1998)
F. Dettenwanger, M. Schütze
Isothermal Oxidation of α2-Ti3Al between 800 and 1000°C
in "Solution of Corrosion Problems in Advanced Technologies", Eds. G. Schmitt, M. Schütze, Chapter 2/28, DECHEMA, Frankfurt am Main (1999)
U. Hornauer, E. Richter, E. Wieser, W. Möller, G. Schumacher, C. Lang, M. Schütze
Improvement of the High Temperature Oxidation Resistance of Ti50 Al via Ion-Implantation
Nuclear Instruments and Methods in Physics Research B148 (1999) 858-862
M. Schmitz-Niederau, M. Schütze
The Oxidation Behaviour of Several Ti-Al Alloys at 900°C in Air
Oxidation of Metals 52 (1999) 225-240
M. Schmitz-Niederau, M. Schütze
Cracking and Healing of Oxide Scales on Ti-Al Alloys at 900°C
Oxidation of Metals 52 (1999) 241-276
G. Schumacher, F. Dettenwanger, M. Schütze, U. Hornauer, E. Richter, E. Wieser, W. Möller
Microalloying Effects in the Oxidation of TiAl Materials
Intermetallics 7 (1999) 1113-1120
G. Schumacher, C. Lang, M. Schütze, U. Hornauer, E. Richter, E. Wieser, W. Möller
Improvement of the Oxidation Resistance of γ-Titanium Aluminides by Microalloying with Chlorine using Ion Implantation
Materials and Corrosion 50 (1999) 162-165
A. Zeller, F. Dettenwanger, M. Schütze
Influence of Water Vapor on the Creep Behaviour of TiAl
in "Gamma Titanium Aluminides 1999", Eds. Y.-W. Kim et al., TMS, Warrendale (1999) 761-768
A. Zeller, F. Dettenwanger, M. Schütze
Influence of Water Vapour on the Oxidation Behaviour of TiAl at 700 and 750°C
in "Solution of Corrosion Problems in Advanced Technologies", Eds. G. Schmitt, M. Schütze, Chapter 2/31, DECHEMA, Frankfurt am Main (1999)
F. Dettenwanger, M. Schütze
Isothermal Oxidation of α2-Ti3Al
Oxidation of Metals 54 (2000) 121-138
U. Hornauer, R. Günzel, H. Reuther, E. Richter, E. Wieser, W. Möller, G. Schumacher, F. Dettenwanger, M. Schütze
Protection of γ-based TiAl Against High Temperature Oxidation Using Ion Implantation of Chlorine
Surface and Coatings Technology 125 (2000) 89-93
U. Hornauer, E. Richter, W. Matz, H. Reuther, A. Mücklich, E. Wieser, W. Möller, G. Schumacher, M. Schütze
Microstructure and oxidation kinetics of intermetallic TiAl after Si- and Mo- ion implantation
Surface and Coatings Technology 128-129 (2000) 418-422
A. Ralison, F. Dettenwanger, M. Schütze
Oxidation of Orthorhombic Ti2AlNb Alloys at 800°C in Air
Materials and Corrosion 51 (2000) 317-328
A. Ralison, F. Dettenwanger, M. Schütze
Oxidation in air and hot corrosion behavior of orthorhombic Ti2AlNb alloys
Proc. Eurocorr 2000 (CD), London
M. Schütze, G. Schumacher, F. Dettenwanger, U. Hornauer, E. Richter, E. Wieser, W. Möller
Einfluß einer oberflächennahen Dotierung auf die Oxidationskinetik von TiAl-Werkstoffen
in "Schutzschichten für Hochtemperaturanwendungen", FDS, Dresden (2000)
G. Schumacher, F. Dettenwanger, M. Schütze
Investigations of the Microalloying Effect of Chlorine in the Oxidation of TiAl Alloys
Materials at High Temperatures 17 (2000) 53-58
G. Schumacher, F. Dettwanger, M. Schütze, A. Iberl, D. Reil
XRD Investigations of the Phosphorus Effect on the Oxidation of TiAl Alloys by High-Resolution Methods
Oxidation of Metals 54 (2000) 317-337
C. Bruns, M. Schütze
Investigation of the Mechanical Properties of Oxide Scales on Nickel and TiAl
Oxidation of Metals 55 (2001) 35-68
A. Donchev, M. Schütze
Improvement of the oxidation resistance of γ-TiAl alloys by ion implantation
in "Advanced Thermal Barrier Coatings and Titanium Aluminides for Gas Turbines", DLR, Bonn (2002) 134-136
V. Gauthier, F. Dettenwanger, M. Schütze
Oxidation behavior of γ-TiAl coated with zirconia thermal barriers
Intermetallics 10 (2002) 667-674
V. Gauthier, M. Schütze
Oxidation behaviour of γ-TiAl coated with zirconia thermal barriers
in "Advanced Thermal Barrier Coatings and Titanium Aluminides for Gas Turbines", DLR, Bonn (2002) 215-218
W. Przybilla, M. Schütze
Growth stresses in the oxide scales on TiAl alloys at 800 and 900°C
Oxidation of Metals 58 (2002) 337-359
M. Schütze, A. Donchev, V. Gauthier, H.-E. Zschau
Improvement of the oxidation resistance of intermetallic TiAl alloys by the halogen effect
Proc. 15 Int. Corr. Congress, Granada (CD) (2002) Paper 782
M. Schütze, G. Schumacher, F. Dettenwanger, U. Hornauer, E. Richter, E. Wieser, W. Möller
The halogen effect in the oxidation of intermetallic titanium aluminides
Corrosion Science 44 (2002) 303-318
A. Zeller, F. Dettenwanger, M. Schütze
Influence of water vapour on the creep and fatigue properties of TiAl
Intermetallics 10 (2002) 33-57
A. Zeller, F. Dettenwanger, M. Schütze
Influence of water vapour on the oxidation behaviour of titanium aluminides
Intermetallics 10 (2002) 59-72
H.-E. Zschau, V. Gauthier, M. Schütze, H. Baumann, K. Bethge
Investigation of the fluorine microalloying effect in the oxidation of TiAl at 900°C in air
in "Advanced Thermal Barrier Coatings and Titanium Aluminides for Gas Turbines", DLR, Bonn (2002) 210-214
A. Donchev, B. Gleeson, M. Schütze
Thermodynamic considerations of the beneficial effect of halogens on the oxidation resistance of TiAl-based alloys
Intermetallics 11 (2003) 387-398
A. Donchev, M. Schütze, E. Richter, U. Hornauer, E. Wieser
Erhöhung der Oxidationsbeständigkeit von TiAl-Legierungen durch Ionenimplantation
Tagungsband 1, KKF-Kolloquium "Problemlösungen für den metallischen Leichtbau", January 2003, GfKORR e.V., Frankfurt (2003)
V. Gauthier, F. Dettenwanger, M. Schütze, V. Shemet, W.J. Quadakkers
Oxidation-resistant aluminide coatings on γ-TiAl
Oxidation of Metals 59 (2003) 233-255
U. Hornauer, E. Richter, E. Wieser, W. Möller, A. Donchev, M. Schütze
Plasma immersion ion implantation of TiAl using chlorine containing plasma
Surface and Coatings Technology 173-174 (2003) 1182-1186
A. Ralison, F. Dettenwanger, M. Schütze
Oxidation of orthorhombic Ti2AlNb alloys in the temperature range 550-1000°C in air
Proceedings of the Fifth International Conference on the Microscopy of Oxidation, Limerick, 26-28 August 2002, Eds. S.B. Newcomb, G. Tatlock (2003) 361-383
A. Ralison, F. Dettenwanger, M. Schütze
Oxidation of orthorhombic Ti2AlNb alloys in the temperature range 550-1000°C in air
Materials at High Temperatures 20 (2003) 607-629
H.-E. Zschau, V. Gauthier, G. Schumacher, F. Dettenwanger, M. Schütze, H. Bauman
Investigation of the fluorine microalloying effect in the oxidation of TiAl at 900°C in Air
Oxidation of Metals 59 (2003) 183-200
H.-E. Zschau, M. Schütze, H. Baumann, K. Bethge
Formation of an Alumina Scale after Fluorine Application and Oxidation of TiAl at 900°C in Air
Proceedings of the 203rd Meeting of The Electrochemical Society, Pennington (2003)
H.-E. Zschau, M. Schütze, H. Baumann, K. Bethge
Investigation of the fluorine microalloying effect in the oxidation of TiAl at 900°C in Air
Proceedings of the 203rd Meeting of The Electrochemical Society, Pennington (2003)
H.-E. Zschau, M. Schütze, H. Baumann, K. Bethge
Investigation of the mechanism of the fluorine microalloying effect at the oxidation of TiAl using nuclear physics methods
Proceedings of the Michal Smialowski International Symposium on Corrosion and Hydrogen Degradation: Advances in Corrosion Science and Application. 9.-13.9.2003, Zakopane (2003) 187-192
A. Donchev, M. Schütze
Cyclic oxidation behaviour of halogen implanted Ti-46.5Al-4(Cr, Nb, Ta, B)
Materials Science Forum 461-464 (2004) 447-454
A. Donchev, M. Schütze
Gib Sauerstoff bei Leichtmetallen keine Chance
in "Trendbarometer Technik", H.-J. Bullinger (Ed.), Hanser Verlag. Berlin (2004) 148-149
A. Donchev, M. Schütze
Hochtemperatur Oxidationsschutz für intermetallische Titanaluminidleichtbaulegierungen durch Nutzung des Halogeneffekts
Proc. Oberflächentage 2004, Deutsche Gesellschaft für Galvano- und Oberflächentechnik e.V. (DGO, Düsseldorf (2004) 93-99
A. Donchev, M. Schütze
Oxidationsschutz durch Halogene
Metalloberfläche 58 (2004) 32-34
A. Donchev, H.-E. Zschau, M. Schütze
The astounding effect of halogens improving the oxidation resistance of titanium aluminide light weight materials
in "Trends in Electrochemistry and Corrosion at the Beginning of the 21st Century", Eds. E. Brilas, P.-L. Cabot,  Publ. Universitat de Barcelona (2004) 1097-1123
H.-E. Zschau, M. Schütze, H. Baumann, K. Bethge
Application of ion beam analysis for the control of the improvement of the oxidation resistance of TiAl at 900 °C in air by fluorine ion implantation an HF-treatment
Nuclear Instruments and Methods in Physics Research B 240 (2005) 137-141
H.-E. Zschau, M. Schütze, H. Baumann, K. Bethge
The Quantitative Role of Surface Doped Fluorine for the Improvement of Oxidation Resistance of TiAl in Air
Materials Science Forum 461-464 (2004) 505-512
A. Donchev, H.-E. Zschau, M. Schütze
The halogen effect for improving the oxidation resistance of TiAl-alloys
Materials at High Temperatures 22 (2005) 309-314
M. Schütze
Recent advances in the understanding of the halogen effect in the oxidation of intermetallic titanium aluminides
in "High temperature corrosion and materials chemistry V: Proceedings of the International Symposium of the Electrochemical Society", Eds. E. Opila, J.W. Fergus, T. Maruyama, J. Mizusaki (2005) 1-15
H.-E. Zschau, M. Schütze
Ein kostensparendes Verfahren zur Verbesserung der Oxidationsbeständigkeit von Gamma-TiAl-Legierungen bei Temperaturen von 800°C bis 1000°C
Metalloberfläche 59 (2005) 1-25
H.-E. Zschau, M. Schütze
Oxidationsschutz durch Fluor - Verbesserung der Oxidationsbeständigkeit von Gamma-TiAl-Legierungen bei Temperaturen von 800 bis 1.000 Grad Celsius
Metalloberfläche 59 (2005) 31-34
A. Donchev, E. Richter, M. Schütze, R. Yankov
Improvement of the Oxidation Behaviour of TiAl-alloys by Treatment with Halogens
Intermetallics 14 (2006) 1168-1174
A. Donchev, M. Schütze
Oxidationsschutz durch Fluorbehandlung
Metalloberfläche 60/12 (2006) 26-28
A. Donchev, M. Schütze, J. Heller, M. Scheydecker
Oxidationsschutz für Titanaluminidbauteile durch Oberflächenbehandlung mit Fluor
Oberflächentage 2006, Proceedings (CD), ZWO, Bonn (2006)
P.J. Masset, A. Donchev, H.-E. Zschau, M. Schütze
Recent developments in the high temperature oxidation protection of TiAl-alloys by using the fluorine effect
Proc. EuroCorr 2006 Part 2 (2006) 587-598
P.J. Masset, H.-E. Zschau, M. Schütze
TiAl oxidation protection improvements using the halogen effect
Proc. 8th Liege Conference. Materials for Advanced Power Engineering, Eds. J. Lecomte-Beckers, M. Carton, F. Schubert, P.J. Ennis, Schriften des Forschungszentrums Jülich 53 (2006) 783-792
P.J. Masset, H.-E. Zschau, M. Schütze
Comparative fluorine surface treatments for TiAl oxidation protection
Ti-2007 Science and Technology, Journal of the Japan Institute of Metals (2007) 1699-1702
R.A. Yankov, A. Kolitsch, A. Rogozin, M. Steinert, A. Donchev, M. Schütze
Oxidation-resistant γ-TiAl alloys produced by ion implantation of fluorine
Proc. E-MRS Spring Symposium, Strasbourg/F (2007)
R.A. Yankov, A. Kolitsch, M. Steinert, A. Donchev, M. Schütze
Oxidation-resistant TiAl alloys produced by plasma immersion ion implantation of fluorine
Proc. 9th Int. Workshop on Plasma Based Ion Implantation & Deposition, Leipzig (2007)
R.A. Yankov, N. Shevchenko, A. Rogozin, M.F. Maitz, E. Richter, W. Möller, A. Donchev, M. Schütze
Reactive plasma immersion ion implantation for surface passivation
Surface & Coatings Technology 201 (2007) 6752-6758
H.-E. Zschau, M. Schütze, H. Baumann, K. Bethge
The time behaviour of surface applied fluorine inducing the formation of an alumina scale on gamma-TiAl during oxidation at 900°C in air
Intermetallics (2006) 1136-1142
S. Neve, H.-E. Zschau, P.J. Masset, M. Schütze, R. Dörner
Kurzzeitoxidation Fluor-implantierter TiAl-Legierungen
Jahresbericht 2007, Institut für Kernphysik, Universität Frankfurt am Main
H.-E. Zschau, M. Schütze
Formation of a protective Alumina Layer by Fluorine Doping of Titanium Aluminide Surfaces
Ti-2007 Science and Technology, Journal of the Japan Institute of Metals (2007) 1695-1698
H.-E. Zschau, M. Schütze, H. Baumann, K. Bethge
Surface modification of titanium aluminides with fluorine to improve their application for high temperature service conditions
Nuclear Instruments and Methods in Physics Research B 257(2007) 383-387
E. Berghof-Hasselbächer, S. Diliberto, P. Gawenda, P.J. Masset, G. Schmidt, M. Schütze
Metallographische Untersuchungen der Mikrostrukturen von technischen TiAl-Legierungen
Sonderbände der Praktischen Metallographie 40 (2008) 117-124
A. Donchev, A. Kolitsch, W. Möller, M. Schütze, R. Yankov
The fluorine effect for high temperature oxidation protection of TiAl-alloys for automotive and aero-engine applications
in "Structural Aluminides for Elevated Temperatures", Eds. Y.-W. Kim, D. Morris, R. Yang, C. Leyens, TMS Warrendale/USA (2008) 323
A. Donchev, E. Richter, M. Schütze, R. Yankov
Improving the Oxidation Resistance of TiAl-Alloys with Fluorine
Journal of Alloys and Compounds 452 (2008) 7
A. Donchev, M. Schütze
Improving the Oxidation Resistance of γ-Titanium Aluminides by Halogen Treatment
Materials and Corrosion 59 (2008) 489-493
A. Donchev, M. Schütze
The use of fluorine for the protection of TiAl-components against high-temperature oxidation
VDI-Berichte 2008, 1st EUCOMAS, VDI Verlag Düsseldorf (2008) 393
P.J. Masset, S. Neve, H.-E. Zschau, M. Schütze
Influence of alloy compositions on the halogen effect in TiAl alloys
Materials and Corrosion 59 (2008) 609-618
P.J. Masset, M. Schütze
Improvement of the oxidation resistance of TiAl alloys using controlled gaseous fluorination
ECS Trans. 11 (2008) 37
P.J. Masset, M. Schütze
Thermodynamic assessment of the alloy concentration limits for the halogen effect of TiAl alloys
Advanced Engineering Materials 10 (2008) 666-674
H.-E. Zschau S. Neve, P.J. Masset, M. Schütze, H. Baumann, K. Bethge
Characterization of the long time oxidation protection of fluorine implanted technical TiAl-alloys using ion beam methods
Nuclear Instruments and Methods in Physics Research B 266 (2008) 2441-2445
H.-E. Zschau, M. Schütze
Modelling of the long time stability of the fluorine effect in TiAl oxidation
Materials and Corrosion 59 (2008) 619-623
H.-E. Zschau, M. Schütze
Multiple F-Implantation for Improved Oxidation Protection of Gamma-TiAl Alloy
Proceedings of the TMS Conference "Structural Aluminides for Elevated Temperature Applications", New Orleans/USA (2008)
A. Donchev, R. Braun, M. Schütze
Fluorine treatment for improved adherence of EB-PVD thermal barrier coatings on TiAl alloys
in TMS 2009 Supplemental Proceedings Vol. 1: Materials Processing and Properties, The Metals and Minerals Society (TMS) Warrendale/USA (2009) 211
A. Donchev, P.J. Masset, M. Schütze
Surface treatment of TiAl with fluorine for improved performance at elevated temperatures
Mater. Res. Soc. Symp. Proc. 1128 (2009) 159
A. Donchev, R. Pflumm, M. Schütze
Application of the fluorine effect to TiAl-components
Materials Research Society Symposium Proceedings 1128 (2009) 209
A. Donchev, M. Schütze, R. Yankov, A. Kolitsch
Plasma-Immersion-Ion-Implantation of Fluorine to Protect TiAl-Components against High Temperature Oxidation
Plasma Processes and Polymers 6/6-7 (2009) 434
P.J. Masset, M. Laurent, M. Schütze
Characterisation of the oxide/metal interface of fluorine treated titanium aluminides
Defect and Diffusion Forum 289-292 (2009) 397-404
E. Wild, W. Reimers, R. Pflumm, M. Schütze
Space-resolved 2D X-ray phase analysis on structured TNB-V5 after oxidation for 24hr at 900°C
Jahresbericht HASYLAB 2008 (2009)
R.A. Yankov, A. Kolitsch, J. Borany, F. Munnik, A. Donchev, M. Schütze
Surface modification of Ti and low Al-content Ti-alloys for enhanced environmental stability at elevated temperatures
E-MRS Spring Meeting 2009, Proceedings (CD)
E. Berghof-Hasselbächer, P. Gawenda, P.J. Masset, G. Schmidt, M. Schütze, S. Diliberto
The Metallographic Investigation of TiAl Technical Alloy Microstructures
Practical Metallography 47 (2010) 65-83
A. Donchev, R. Braun, M. Schütze
Optimizing thermally grown oxide for thermal barrier coatings on TiAl components via fluorine treatment
JOM 62/1 (2010) 70
A. Donchev, M. Schütze
Comparison of different fluorine treatments for the protection of TiAl-alloys against high temperature oxidation
Materials Science Forum 638-642 (2010) 1294
A. Donchev, M. Schütze
Fluorine treatment of TiAl-components for enhancing high-temperature oxidation resistance
EUCOMAS 2010 Proceedings (CD)
A. Donchev, M. Schütze, A. Kolitsch, R. Yankov
Enhanced resistance of Ti-alloys against environmental attack by a combined Al- and F-treatment
TMS 2010 Supplemental Proceedings Vol. 3: Generals Paper Selections, The Metals and Minerals Society (TMS) Warrendale (2010) 119
A. Donchev, M. Schütze, A. Kolitsch, R. Yankov
Improved environmental resistance of Ti-alloys at elevated temperatures by a combined Al- and F-Treatment
Materials Science & Technology MS&T 2010 Proceedings (CD)
A. Donchev, M. Schütze, A. Kolitsch, R. Yankov
Investigation of the F-effect for oxidation protection of 1st, 2nd and 3rd generation TiAl-alloys
MS&T 2010: Proceedings of Materials Science and technology (2010) 2140-2148
A. Donchev, M. Schütze, A. Kolitsch, R. Yankov
Protection of TiAl-components against high temperature oxidation with fluorine
Materials Science & Technology MS&T 2010 Proceedings (CD)
P.J. Masset, M. Schütze
Oxidation tests with untreated and F-treated TNBV5 alloys
ECS Transactions 25 (2010) 45-56
P.J. Masset, R. Yankov, A. Kolitsch, M. Schütze
Comparison of fluorination treatments to improve the high temperature oxidation resistance of TiAl alloys in SO2 containing environments
Materials Science Forum 638-642 (2010) 1374-1378
S. Neve, P.J. Masset, R.A. Yankov, A. Kolitsch, H.-E. Zschau, M. Schütze
High temperature oxidation resistance of fluorine-treated TiAl alloys: Chemical vs. ion beam fluorination techniques
Nuclear Instruments and Methods in Physics Research B 268/21 (2010) 3381-3385
S. Neve, P.J. Masset, H.-E. Zschau, M. Schütze
Effect of Heating Rate on the Fluorine Content in TiAl-alloy After Oxidation at 900°C
ECS Transactions 25 (2010) 79-86
S. Neve, K. Stiebing, L.P.H. Schmidt, H.-E. Zschau, P.J. Masset, M. Schütze
Non-destructive fluorine depth profiling as quality assurance for the oxidation protection of TiAl turbine blades
Materials Science Forum 638-642 (2010) 1384-1389
A. Donchev, A. Kolitsch, M. Schütze, R. Yankov
Combined Al- plus F-treatment of Ti-alloys for improved behaviour at elevated temperatures
Materials and Corrosion 62 (2011) 695-698
S. Neve, P.J. Masset, H.-E. Zschau, M. Schütze
Measurements of fluorine depth-profiles on TiAl turbine blades using ion beam analytical techniques
Materials and Corrosion 62 (2011) 713-716
R. Pflumm, M. Schütze
Shark-skin inspired surface engineering on intermetallic titanium aluminides for high temperature applications using the fluorine effect
Materials Research Society Symposium Proceedings 1295 (2011) mrsf10-1295-n04-12
H.-E. Zschau, M. Schütze
Oxidation Protection of Titanium Aluminides and Ni-base Superalloys at high Temperatures by the Halogen Effect - Principles and Applications
Materials Science Forum 696 (2011) 366-371
A. Donchev, M. Schütze, A. Kolitsch, R. Yankov
Optimization of the fluorine effect for improving the oxidation resistance of TiAl-alloys
Materials Science Forum 706-709 (2012) 1061-1065
A. Donchev, M. Schütze, A. Kolitsch, R. Yankov
Suppressing the alpha-casing of Ti-alloys by a combined Al- and F-treatment
Ti-2011 Proceedings, Ed. L. Zhou, H. Chang, Y. Li, D. Xu, Science Press Beijing/China (2012) 1864-1867
A. Donchev, M. Schütze, R. Yankov, A. Kolitsch
Efficient oxidation protection of Ti- and TiAl-alloys by fluorine treatments
TMS 2012 Supplemental Proceedings Vol. 2: Materials Properties, Characterization and Modelling, Wiley, Hoboken/USA (2012) 935-940
B. Pelic, D. Rafaja, Patrick J. Masset, H.J. Seifert, L. Bortolotto, M. Schütze, G. Wolf, I. Loeh
Corrosion Behaviour of Ti-48Al-2Nb-2Cr Alloys
Defect and Diffusion Forum 323-325 (2012) 301-307
S. Friedle, N. Nießen, R. Braun, M. Schütze
Thermal barrier coatings on γ-TiAl protected by the halogen effect
Surface and Coatings Technology 212 (2012) 72-78
R.A. Yankov, A. Kolitsch, J. von Borany, A. Mücklich, F. Munnik, A. Donchev, M. Schütze
Surface protection of titanium and titanium aluminium alloys against environmental degradation at elevated temperatures
Surface and Coatings Technology 206 (2012) 3595-3600

 

Silicides and Si-based Ceramics

S. Becker, A. Rahmel, M. Schütze
Oxidation of TiSi2 and MoSi2
Solid State Ionics 53-56 (1992) 280-289
S. Melsheimer, A. Rahmel, M. Schütze
Mechanismus der Hochtemperaturoxidation von Molybdän- und Titandisilizid
in "Refractory Metals and Hard Materials - Key to Advanced Technologies", Eds. H. Bildstein, R. Eck, Vol. 1, Plansee Metall AG, Reutte (1993) 939
K. Bundschuh, S. Melsheimer, M. Schütze
Hochtemperaturoxidation von MoSi2 als Beschichtungswerkstoff auf SiC-Keramik
Fortschrittsber. DKG 10 (1995) 182-194
K. Bundschuh, M. Schütze
The Characterisation of the Environmental Resistance of Advanced Materials above 1500ºC
Proc. esa/estec 3rd European Workshop on High Temperature Materials, esa - European Space Agency, Paris (1996) 145-150
K. Bundschuh, M. Schütze, C. Müller, P. Greil, W. Heider
Selection of Materials for Use at Temperatures above 1500°C in Oxidizing Atmospheres
Key Engineering Materials 132-136 (1997) 1564-1567
S. Melsheimer, M. Fietzek, V. Kolarik, A. Rahmel, M. Schütze
Oxidation of the Intermetallics MoSi2 and TiSi2- A Comparison
Oxidation of Metals 47 (1997) 139-203
S. Melsheimer, A. Rahmel, M. Schütze
Changes in the Transport Properties of Silicon Dioxide Due to Doping of Foreign Ions
Oxidation of Metals 47 (1997) 205-213
M. Schütze, M. Hald, C. Lang. S. Melsheimer, A. Rahmel
Intermetallic disilicides and titanium aluminides - a new class of structural high temperature materials under the aspect of their high temperature oxidation resistance
Pure & Appl. Chem. 69 (1997) 2335-2341
K. Bundschuh, M. Schütze, C. Müller, P. Greil, W. Heider
Selection of Materials for Use at Temperatures Above 1500°C in Oxidizing Atmospheres
Journal of the European Ceramic Society 18 (1998) 2389-2391
S. Lohfeld, F. Dettenwanger, M. Schütze, R. Rix, V. Güther, R. Scholl
Influence of Second Phase Particles on the Oxidation Behaviour of MoSi2 at 1600°C in Air
in "Solution of Corrosion Problems in Advanced Technologies", Eds. G. Schmitt, M. Schütze, Chapter 2/29, DECHEMA, Frankfurt am Main 1999
S. Lohfeld, F. Dettenwanger, M. Schütze, K. Bundschuh, R. Rix, V. Güther, R. Scholl
Investigation of the Oxidation Behaviour of Selected MoSi2 Based Composites at High Temperatures
Proc. Eurocorr 2000 (CD), London
K. Bundschuh, M. Schütze
Materials for Temperatures above 1500°C in Oxidizing Atmospheres Part I: Basic Considerations on Materials Selection
Materials and Corrosion 52 (2001) 204-212
K. Bundschuh, M. Schütze
Materials for Temperatures above 1500°C in Oxidizing Atmospheres Part II: Experimental Results on the Oxidation of MoSi2 Composites and Coated RSiC
Materials and Corrosion 52 (2001) 268-282
K. Bundschuh, M. Schütze
Materials for Temperatures above 1500°C in Oxidizing Atmospheres Part III: Contact Reaction Tests
Materials and Corrosion 52 (2001) 351-361
S. Lohfeld, M. Schütze
Oxidation behaviour of particle reinforced MoSi2 composites at temperatures up to 1700°C - Part I: Literature review
Materials and Corrosion 56 (2005) 93-97
S. Lohfeld, M. Schütze, A. Böhm, V. Güther, R. Rix, R. Scholl
Oxidation behaviour of particle reinforced MoSi2 composites at up to 1700°C - Part II: Initial screening of the oxidation behaviour of MoSi2 composites
Materials and Corrosion 56 (2005) 149-158
S. Lohfeld, M. Schütze, A. Böhm, V. Güther, R. Rix, R. Scholl
Oxidation behaviour of particle reinforced MoSi2 composites at temperatures up to 1700°C - Part III: Oxidation behaviour of optimised MoSi2 composites
Materials and Corrosion 56 (2005) 250-258

 

Materials in Water Vapour Containing Enviroments

W. Christl, A. Rahmel, M. Schütze
Behavior of Oxide Scales on 2.25Cr-1Mo Steel During Thermal Cycling. II. Scales Grown in Water Vapor
Oxidation of Metals 31 (1989) 35
A. Zeller, F. Dettenwanger, M. Schütze
Influence of Water Vapor on the Creep Behaviour of TiAl
in "Gamma Titanium Aluminides 1999", Eds. Y.-W. Kim et al., TMS, Warrendale (1999) 761-768
A. Zeller, F. Dettenwanger, M. Schütze
Influence of Water Vapour on the Oxidation Behaviour of TiAl at 700 and 750°C
in "Solution of Corrosion Problems in Advanced Technologies", Eds. G. Schmitt, M. Schütze, Chapter 2/31, DECHEMA, Frankfurt am Main (1999)
F. Dettenwanger, M. Schorr, J. Ellrich, T. Weber, M. Schütze
The Influence of Si, W and Water Vapour on the Oxidation Behaviour of 9Cr Steels
CORROSION 2001, NACE, Houston (2001) 01151/1-8
F. Dettenwanger, M. Schorr, J. Ellrich, T. Weber, M. Schütze
The influence of water vapour and silicon on the long term oxidation behaviour of 9Cr Steels
in "Lifetime modelling of high temperature corrosion processes", Eds. M. Schütze, W.J. Quadakkers, J.R. Nicholls, Maney Publ., London (2001) 206-219
A. Zeller, F. Dettenwanger, M. Schütze
Influence of water vapour on the creep and fatigue properties of TiAl
Intermetallics 10 (2002) 33-57
A. Zeller, F. Dettenwanger, M. Schütze
Influence of water vapour on the oxidation behaviour of titanium aluminides
Intermetallics 10 (2002) 59-72
M. Schütze, D. Renusch, M. Schorr
Parameters determining the breakaway oxidation behaviour of ferritic-martensitic 9% Cr steels in environments containing H2O
Corrosion engineering, science and technology 39 (2004) 157-166
M. Schütze, M. Schorr, D. Renusch, A. Donchev, J. Vossen
The role of alloy composition, environment and stresses for the oxidation resistance of modern 9% Cr steels for fossil power stations
Materials Research 7 (2004) 111-123
A. Donchev, H. Fietzek, V. Kolarik, D. Renusch, M. Schütze
The effect of water vapor in increasing growth stresses in the oxide scale on martensitic steam plant alloys
Materials at High Temperatures 22 (2005) 139-146
M. Schütze, D. Renusch, M. Schorr
Chemical-mechanical failure of oxide scales on 9% Cr steels in air with H2O
Materials at High Temperatures 22 (2005) 113-120
D. Renusch, M. Schütze
Experience with the use of the acoustic emission technique for monitoring scalefailure in wet and dry environments
Materials at High Temperatures 22 (2005) 35-45
K. Yanagihara, D. Renusch, M. Röhrig, M. Schütze
Effect of Cr Content and Water Vapor on Fracture Behavior of the Scales Formed on Fe and Fe-Cr Alloy
Materials Science Forum 522-523 (2006) 497
I.G. Wright, M. Schütze, P.F. Tortorelli, R.B. Dooley
Towards improved prediction of scale exfoliation from steam tubes
Materials at High Temperatures 24 (2007) 265-274
B. Iwanschitz, J. Sfeir, A. Mai, M. Schütze
Degradation of SOFC Anodes upon Redox Cycling: A Comparison Between Ni/YSZ and Ni/CGO
Journal of The Electrochemical Society 157 (2010) B269-B278
D. Schmidt, M. Schütze
Improved Corrosion Resistance of Superheater Materials in H2O Containing Environments using Mn-Diffusion Coatings
Materials Science Forum 696 (2011) 330-335
A. Naji, M. Schütze
Development of Diffusion Coatings to Optimise the High Temperature Corrosion Resistance of Fuel Cell Reformer Materials
Defect and Diffusion Forum Vols. 323-325 (2012) 245-251
D. Schmidt, M. Galetz, M. Schütze
Deposition of Manganese and Cobalt on Ferritic-Martensitic Steels via Pack Cementation Process
Oxidation of Metals (2012) DOI 10.1007/s11085-012-9340-4
D. Schmidt, M. Galetz, M. Schütze
Improved oxidation resistance of ferritic-martensitic steels in water vapour containing environments via diffusion coatings
Materials at High Temperatures 29 (2012) 159-165
D. Schmidt, M. Galetz, M. Schütze
Improvement of the Oxidation Behavior of Ferritic-Martensitic Steels in Water Vapor Containing Environments
Proc. NACE 2012 (CD), Salt Lake City/ USA (2012)

 

Heat-Resistant Steels

J. Barbehön, A. Rahmel, M. Schütze
Behavior of the Scale on a 9.5Cr Steel under Cyclical Deformation of the Base Metal
Oxidation of Metals 30 (1988) 85
W. Christl, A. Rahmel, M. Schütze
Behavior of Oxide Scales on 2.25Cr-1Mo Steel During Thermal Cycling. I. Scales Formed in Oxygen and Air
Oxidation of Metals 31 (1989) 1
W. Christl, A. Rahmel, M. Schütze
Behavior of Oxide Scales on 2.25Cr-1Mo Steel During Thermal Cycling. II. Scales Grown in Water Vapor
Oxidation of Metals 31 (1989) 35
B. Glaser, M. Schütze, F. Vollhardt
Auswertung von Daten zum H2S-Angriff auf Stähle bei verschiedenen Temperaturen und Konzentrationen
Chem. Ing. Techn. 63 (1991) 634
M. Schulte, M. Schütze
The Behaviour of Protective Sulfide Scales on Various Steels in H2S-Containing Atmospheres during Temperature Changes
in "Progress in the Understanding and Prevention of Corrosion", Eds. J.M. Costa, A.D. Mercer, The Institute of Materials, London (1993) 750
M. Walter, M. Schütze, A. Rahmel
Behavior of Oxide Scales on 12Cr-1Mo Steel During Thermal Cycling
Oxidation of Metals 39 (1993) 389-410
M. Schütze, M. Nöth
The Sulfidation Resistance of Several Fe- and Ni-Base Alloys and of Two Intermetallics in Atmospheres Containing H2S at 400-700ºC
Proc. 13th ICC, Australasian Corrosion Association, Melbourne (1996) 1534-1542
J.P.T. Vossen, M. Schütze
Isothermal and Thermocyclic Oxidation Behaviour of Heat-resistant Chromium Containing Steels in Air at 650ºC
Proc. EUROCORR '96, Vol. III, Paper OR 11 Centre Français de l'Anticorrosion/Société de Chimie Industrielle, Paris 1996
J.P.T. Vossen, M. Schütze
Limits for the Recovery of Chromium Oxide Scales on Heat-resistant Stainless Steels in Air With and Without Superimposed Mechanical Load at 650°C
Proc. Int. Conf. Corrosion-Deformation Interactions (CDI), Vol. IV, Paper P 40 Centre Français de l'Anticorrosion/Société de Chimie Industrielle, Paris 1996
J.P.T. Vossen, P. Gawenda, K. Rahts, M. Röhrig, M. Schorr, M. Schütze
Limits of the Oxidation Resistance of Several Heat-resistant Steels under Isothermal and Cyclic Oxidation as well as under Creep in Air at 650°C
Materials at High Temperatures 14 (1997) 387-401
M. Schulte, A. Rahmel, M. Schütze
The Sulfidation Behavior of Several Commercial Ferritic and Austenitic Steels
Oxidation of Metals 49 (1998) 33-70
M. Schulte, M. Schütze
The Role of Scale Stresses in the Sulfidation of Steels
Oxidation of Metals 51 (1999) 55-77
F. Dettenwanger, M. Schorr, J. Ellrich, T. Weber, M. Schütze
The Influence of Si, W and Water Vapour on the Oxidation Behaviour of 9Cr Steels
CORROSION 2001, NACE, Houston (2001) 01151/1-8
F. Dettenwanger, M. Schorr, J. Ellrich, T. Weber, M. Schütze
The influence of water vapour and silicon on the long term oxidation behaviour of 9Cr Steels
in "Lifetime modelling of high temperature corrosion processes", Eds. M. Schütze, W.J. Quadakkers, J.R. Nicholls, Maney Publ., London (2001) 206-219
M. Schütze, D. Renusch, M. Schorr
Parameters determining the breakaway oxidation behaviour of ferritic-martensitic 9% Cr steels in environments containing H2O
Corrosion engineering, science and technology 39 (2004) 157-166
M. Schütze, M. Schorr, D. Renusch, A. Donchev, J. Vossen
The role of alloy composition, environment and stresses for the oxidation resistance of modern 9% Cr steels for fossil power stations
Materials Research 7 (2004) 111-123
G. Wright, M. Schütze, S.R. Paterson, P.F. Tortorelli, R.B. Dooley
Progress in prediction and control of scale exfoliation on superheater and reheater alloys
Proc. EPRI International Conference on Boiler Tube and HRSG Tube Failures and Inspections, San Diego (2004)
A. Donchev, H. Fietzek, V. Kolarik, D. Renusch, M. Schütze
The effect of water vapor in increasing growth stresses in the oxide scale on martensitic steam plant alloys
Materials at High Temperatures 22 (2005) 139-146
M. Schütze, D. Renusch, M. Schorr
Chemical-mechanical failure of oxide scales on 9% Cr steels in air with H2O
Materials at High Temperatures 22 (2005) 113-120
M. Schütze, E. Berghof-Hasselbächer, J.J. Hoffman
Development of an atlas of microstructures for the latest heat-resistant cast alloys
NACE Corrosion 2007, Paper 07425/1-11
E. Berghof-Hasselbächer, P. Gawenda, M. Schorr, M. Schütze, J.J. Hoffman
Atlas of Microstructures
Materials Technology Institute, St. Louis (2008)
E. Berghof-Hasselbächer, M. Schorr, P. Gawenda, M. Schütze, J.J. Hoffman
The Development of a Microstructural Atlas of the Latest Heat Resistant Centrifugal Casting Alloys
Practical Metallography 45 (2008) 441-454
J. Kalivodová, D. Baxter, M. Schütze
Corrosion behaviour of boiler steels, coatings and welds in flue gas environments
Materials and Corrosion 59 (2008) 367-373
G. Kunschert, H.-P. Martinz, M. Schütze
Investigation of Oxide-Nucleation on ferritic FeCr Interconnect Alloys for Solid Oxide Fuel Cells exposed to Anode and Cathode Gases at 850°C
Materials Science Forum 559-598 (2008) 779-787
V. Vokál, V. Rohr, M.J. Pomeroy, M. Schütze
Corrosion of alloys and their diffusion aluminide coatings by KCl:K2SO4 deposits at 650°C in air
Materials and Corrosion 59 (2008) 374-379

 

Investigation Techniques

K.-H. Döhle, A. Rahmel, M. Schmidt, M. Schütze
Two Different Test Rigs for Creep Experiments in Aggressive Environments
in "Corrosion and Mechanical Stress at High Temperatures", Eds. V. Guttmann, M. Merz, Applied Science Publishers, London (1981) 441
J. Barbehön, K.-H. Döhle, M. Schütze
Acquisition of Experimental Data with the Aid of a Personal Computer during Long-Term Experiments in a Laboratory Testing High Temperature Materials
Computer Applications in the Laboratory 5 (1984) 336
U. Bruch, K. Döhle, J. Pütz, A. Rahmel, M. Schütze, K.D. Schuhmacher
Comparison of the Corrosion Behaviour of Different High Temperature Alloys with and without Superimposed Creep Deformation in an Artificial Steam Reformer Atmosphere
in "Metallic Corrosion 1984", Vol. III, National Research Council Canada, Toronto (1984) 325
M. Schütze, J. Barbehön, K.-H. Döhle
Automatisierte Meßdatenerfassung mit Hilfe des Personalcomputers bei der Ermittlung von Hochtemperatur-Festigkeitskennwerten
in "Werkstoffprüfung 1984", DVM, Berlin (1985) 167
W. Christl, A. Rahmel, M. Schütze
Application of the Acoustic Emission Technique for the Detection of Oxide Scale Cracking during Thermal Cycling
Materials Science and Engineering 87 (1987) 289-293
M. Schütze, K. Döhle, H. Fellmann
Untersuchung und Bewertung des Verhaltens von Hochtemperaturwerkstoffen unter gleichzeitiger thermisch-chemisch-mechanischer Belastung
in "Werkstoffprüfung 1987", DVM, Berlin (1987) 23
R. Luger, B. Genswürger-Geerißen, F. Petri, D. Puppel, M. Schütze
Transmissionselektronenmikroskopische Untersuchungen zum Ausscheidungsverhalten von CuNi10(Fe)-Legierungen
Z. Metallkunde 79 (1988) 259
M. Schütze
Ein auf dem Verständnis der Mechanismen basierendes Konzept zur Prüfung der Hochtemperaturkorrosionsbeständigkeit unter mechanischer Beanspruchung
in "Werkstoffprüfung 1988", DVM, Berlin (1988) 419
L. Hodulak, M. Schütze
Rechnerprogramm für PC zum Nachweis der Tolerierbarkeit von Fehlern für Komponenten des chemischen Apparatebaus
Mat.-wiss. u. Werkstofftech. 20 (1989) 236
B. Glaser, K. Rahts, M. Schorr, M. Schütze
Nachweis von Chloriden in metallischen Werkstoffen bei Hochtemperaturkorrosion
Sonderbände der Praktischen Metallographie 25 (1994) 75-84
S.R.J. Saunders, M.M. Nagl, M. Schütze
Measurement Methods for the Determination of Fracture Strain
Mater. High Temp. 12 (1994) 103-109
M. Schütze
Hochtemperaturkorrosion und mechanische Beanspruchung
in "Korrosion verstehen - Korrosionsschäden vermeiden", Eds. H. Gräfen, A. Rahmel, Verlag Irene Kuron, Bonn (1994) 402-410
K. Rahts, M. Schorr, M. Schütze, M. Schmitz-Niederau
Darstellung von Oxidschichten und Gefüge von TiAl-Legierungen aus Hochtemperaturversuchen
Practical Metallography 27 (1995) 561-565
C. Lang, M. Schütze
TEM Investigations of the Early Stages of TiAl Oxidation
Oxidation of Metals 46 (1996) 255-285
C. Bruns, M. Schütze
Messung der Haftfestigkeit von Deckschichten mittels Schallemissionsanalyse
Berichtsband 58 "Statusberichte zur Entwicklung und Anwendung der Schallemissionsanalyse", Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V. Berlin (1997) 235-237
K. Rahts, M. Nöth, M. Schulte, M. Schorr, P. Gawenda, M. Schütze
Untersuchungen an Sulfidschichten verschiedener Hochtemperaturwerkstoffe aus thermischer Beanspruchung in H2S-haltiger Atmosphäre
Sonderbände der Praktischen Metallographie 28 (1997) 229-236
M. Schütze, C. Bruns
Stresses and Adhesion of Surface Scales
in "Corrosion-Deformation Interactions", Ed. T. Magnin, EFC-Publ. No. 21, The Institute of Materials, London (1997) 308-318
K. Rahts, M. Schorr, C. Schwalm, M. Schütze
Untersuchungen über den Einfluß von Chlor bei der Hochtemperaturoxidation
Practical Metallography 29 (1998) 305-311
F. Dettenwanger, H. Echsler, C. Bruns, M. Schütze
Investigation of Damage Mechanisms in Thermal Barrier Coatings by Acoustic Emission
in "Elevated Temperature Coatings: Science and Technology III", Eds. J.M. Hampikian, N.B. Dahotre, TMS, Warrendale (1999)
K. Rahts, M. Schorr, C. Schwalm, M. Schütze
Wasserfreie Präparationsmethode zum Nachweis von Chloriden bei der Hochtemperaturoxidation in chlorhaltigen Atmosphären
Practical Metallography 36 (1999) 86-97
G. Schumacher, F. Dettenwanger, M. Schütze, J.D. Sunderkötter, M.F. Stroosnijder
TEM-Investigations of Oxidized Y-implanted PM Chromium
in "Solution of Corrosion Problems in Advanced Technologies", Eds. G. Schmitt, M. Schütze, Chapter 2/30, DECHEMA, Frankfurt am Main (1999)
E. Berghof-Hasselbächer, M. Schütze
Ein alternatives Schliffpräparationsverfahren zur Verbesserung der optischen Darstellung und Differenzierung nichtmetallischer Schichten gegenüber dem Einbettmittel
Sonderbände der Praktischen Metallographie 31 (2000) 319-325
G. Schumacher, F. Dettwanger, M. Schütze, A. Iberl, D. Reil
XRD Investigations of the Phosphorus Effect on the Oxidation of TiAl Alloys by High-Resolution Methods
Oxidation of Metals 54 (2000) 317-337
C. Bruns, M. Schütze
Investigation of the Mechanical Properties of Oxide Scales on Nickel and TiAl
Oxidation of Metals 55 (2001) 35-68
M. Schütze, S. Ito, W. Przybilla, H. Echsler, C. Bruns
Test Methods and Data on the Mechanical Properties of Protective Oxide Scales
Materials at High Temperatures 18 (2001) 39-50
E. Berghof-Hasselbächer, H.-E. Bühler, O. Greven, M. Schorr, J. Schürhoff, M. Schütze
Untersuchungen zum Bauteilversagen von Rostsystemen bei der Restholzverbrennung
Practical Metallography 39 (2002) 369-386
E. Berghof-Hasselbächer, C. Rosado Sainz-Rosas, M. Schütze
Korrosionsschutzschichten gegen Metal Dusting Angriff
Sonderbände der Praktischen Metallographie 34, Ed. G. Petzow, Werkstoff-Informationsgesellschaft, Frankfurt am Main (2002) 271-281
E. Berghof-Hasselbächer, C. Rosado Sainz-Rozas, M. Schütze
Protective Coatings to Prevent Metal Dusting
Practical Metallography 40 (2003) 407-419
E. Berghof-Hasselbächer, A. Littner, M. Schütze, M. Schorr, P. Gawenda
Charakterisierung von Al- und PtAl-Diffusionsbeschichtungen auf Ni-Basis-Superlegierungen
Sonderbände der Praktischen Metallographie 35 (2004) 325-336
E. Berghof-Hasselbächer, E. Nicolas, V. Rohr, M. Schütze
Bildanalytische Schichtdickenbestimmung an Al-Diffusionsbeschichtungen
Sonderbände der praktischen Metallographie 36 (2004) 451-457
E. Berghof-Hasselbächer, M. Schorr, P. Gawenda, M. Schütze
Potentiale und Grenzen der Interferenzschichten-Metallographie bei der Charakterisierung von Karbidtypen am Beispiel hitzebeständiger Schleudergusswerkstoffe
Sonderbände der praktischen Metallographie 37 (2005) 173-179
D. Renusch, M. Schütze
Experience with the use of the acoustic emission technique for monitoring scale failure in wet and dry environments
Materials at High Temperatures 22 (2005) 33-45
E. Berghof-Hasselbächer, V. Rohr, E. Nicolas, M. Schütze
The determination of Al-diffusion layer thickness by image processing
Practical Metallography 43 (2006) 127-142
B. Isecke, M. Schütze, H.-H. Strehblow
Measurement methods for materials performance - corrosion
Springer Handbook of Materials Measurement Methods, Eds. H. Czichos, T. Saito, L. Smith, Springer-Verlag (2006) 611-684
M. Schütze, M. Malessa
Reliable assessment of high temperature oxidation resistance by the development of a comprehensive code of practice for thermocycling oxidation testing - European COTEST project
Materials and Corrosion 57 (2006) 5-13
E. Berghof-Hasselbächer, M. Schorr, P. Gawenda, M. Schütze, J.J. Hoffman
Entwicklung eines Mikrostrukturatlanten für die neuesten hitzebeständigen Schleudergusswerkstoffe
Sonderbände der Praktischen Metallographie 39 (2007) 81-88
M. Schütze, E. Berghof-Hasselbächer, J.J. Hoffman
Development of an atlas of microstructures for the latest heat-resistant cast alloys
NACE Corrosion 2007, Paper 07425/1-11
E. Berghof-Hasselbächer, S. Diliberto, P. Gawenda, P.J. Masset, G. Schmidt, M. Schütze
Metallographische Untersuchungen der Mikrostrukturen von technischen TiAl-Legierungen
Sonderbände der praktischen Metallographie 40 (2008) 117-124
E. Berghof-Hasselbächer, P. Gawenda, M. Schorr, M. Schütze, J.J. Hoffman
Atlas of Microstructures
Materials Technology Institute, St. Louis (2008)
E. Berghof-Hasselbächer, M. Schorr, P. Gawenda, M. Schütze, J.J. Hoffman
Entwicklung eines Mikrostrukturatlanten für die neuesten hitzebeständigen Schleudergusswerkstoffe
Practical Metallography 45 (2008) 441-454
E. Berghof-Hasselbächer, P.J. Masset, D. Texier, G. Schmidt, P. Gawenda, M. Jusek, M. Schütze
Mikrostrukturen von NiAl(1-x)Hf(x)-Legierungen (x=0…0,2)
Sonderbände der Praktischen Metallographie 41 (2009) 113-119
I. Teliban, C. Thede, S. Chemnitz, C. Bechtold, W.J. Quadakkers, M. Schütze, E. Quandt
Magnetic moment investigation by frequency mixing techniques
Review of Scientific Instruments 80 (2009) 115106
E. Berghof-Hasselbächer, P. Gawenda, P.J. Masset, G. Schmidt, M. Schütze, S. Diliberto
Metallographische Untersuchungen der Mikrostrukturen von technischen TiAl-Legierungen
Practical Metallography 47 (2010) 65-83
B. Isecke, M. Schütze, H.-H. Strehblow
Measurement methods for materials performance - corrosion
Springer Handbook of Materials Measurement Methods, 2nd Edition, Eds. H. Czichos, T. Saito, L. Smith, Springer-Verlag (2011) 611-684

 

Corrosion and Protection in Liquid Media

K.H. Büttgen, D. da Silva Rosa, B. du Bois, P. Gawenda, A. Rahmel, K. Rahts, M. Schütze
Stimulation of aqueous corrosion by MoS2 deposits
Materials and Corrosion 49 (1998) 505-511
T. Hollstein, T. Graas, K. Bundschuh, M. Schütze
Das Korrosionsverhalten unterschiedlicher Siliciumnitride in wäßrigen Lösungen
Keramische Zeitschrift 50 (1998) 416-421
H.-Q. Nguyen, W. Fürbeth, M. Schütze
Nano-enamel: a new way to produce glass-like protective coatings for metals
Materials and Corrosion 53 (2002) 772-782
S. Benfer, W. Fürbeth, M. Schütze
Nanopartikelbasierte Schichten für die Emailreparatur
CAV Chemie-Anlagen + Verfahren (5/2006) 44-46
F. Feil, W. Fürbeth, M.Schütze
Kleine Teilchen auf leichtem Metall - Nanopartikel-basierte anorganische Schutzschichten für Magnesiumwerkstoffe
Metalloberfläche 60 (11) (2006) 38-41
F. Feil, W. Fürbeth, M.Schütze
Nanopartikel-basierte anorganische Schutzschichten für Magnesiumwerkstoffe
Tagungsband Oberflächentage 2006 (CD), Bonn (2006)

 

Role of Microstructure

B. Reppich, H. Bügler, R. Leistner, M. Schütze
Application of the Microstructural Concept of Creep and Rupture Life Time to a γ'-Precipitating Ni-Base Alloy I. Yielding and Creep Behaviour
in "Creep and Fracture of Engineering Materials and Structures", Eds. B. Wilshire, D. Owen, Pineridge Press, Swansea (1984) 279
R. Luger, B. Genswürger-Geerißen, F. Petri, D. Puppel, M. Schütze
Transmissionselektronenmikroskopische Untersuchungen zum Ausscheidungsverhalten von CuNi10(Fe)-Legierungen
Z. Metallkunde 79 (1988) 259
R. Luger, M. Schütze
Einfluß des Fe-Gehalts und der Auslagerungszeit auf mechanische, elektrische und magnetische Eigenschaften der Legierung CuNi10(Fe)
Mat.-wiss. u. Werkstofftech. 20 (1989) 60
G. Luxenburger, M. Schütze
Einfluß der Carbidstruktur auf das Kriechverhalten der hitzebeständigen Edelstahl-Gußlegierung HK40
Z. Metallkunde 82 (1991) 430
G. Schumacher, F. Dettenwanger, M. Schütze, J.D. Sunderkötter, M.F. Stroosnijder
TEM-Investigations of Oxidized Y-implanted PM Chromium
in "Solution of Corrosion Problems in Advanced Technologies", Eds. G. Schmitt, M. Schütze, Chapter 2/30, DECHEMA, Frankfurt am Main (1999)
E. Berghof-Hasselbächer, P. Gawenda, M. Schorr, M. Schütze, J.J. Hoffman
Atlas of Microstructures
Materials Technology Institute, St. Louis (2008)
H. Latreche, G. Bozzolo, P.J. Masset, T. Weber, M. Schütze
Measurements of the coefficient of thermal expansion (CTE) of NiAlMo alloys and comparison with modelling predictions
Materials Science and Engineering: A 527/21-22 (2010) 5837
E. Berghof-Hasselbächer, P.J. Masset, L. Zhang, L. Liu, Z. Jin, G. Schmidt, M. Galetz, M. Schütze
Mikrostrukturen von Erbium-modifizierten Aluminium-Kupfer-Legierungen
Sonderbände der Praktischen Metallographie 43 (2011) 77-83
E. Berghof-Hasselbächer, P.J. Masset, L. Zhang, L. Liu, Z. Jin, G. Schmidt, M. Galetz, M. Schütze
Microstructures of Erbium Modified Aluminium-Copper Alloys
Pract. Metallogr. 49 (2012) 7, 396-411
E. Berghof-Hasselbächer, M. Schütze, R. Durham, M. Galetz, G. Schmidt, J.J. Hoffman
Entwicklung eines Mikrostrukturatlanten für die neuesten hitzebeständigen Schleudergusswerkstoffe 35/45LC, HPLC, 20-32Nb und den Schmiedewerkstoff Haynes 230 auf Ni-Basis
Sonderbände der Praktischen Metallographie 44 (2012) 203-209

 

Mechanical High Temperature Properties without Corrosion

B. Reppich, H. Bügler, R. Leistner, M. Schütze
Application of the Microstructural Concept of Creep and Rupture Life Time to a γ'-Precipitating Ni-Base Alloy I. Yielding and Creep Behaviour
in "Creep and Fracture of Engineering Materials and Structures", Eds. B. Wilshire, D. Owen, Pineridge Press, Swansea (1984) 279
L. Hodulak, M. Schütze
Rechnerprogramm für PC zum Nachweis der Tolerierbarkeit von Fehlern für Komponenten des chemischen Apparatebaus
Mat.-wiss. u. Werkstofftech. 20 (1989) 236
G. Luxenburger, M. Schütze
Einfluß der Carbidstruktur auf das Kriechverhalten der hitzebeständigen Edelstahl-Gußlegierung HK40
Z. Metallkunde 82 (1991) 430
K. Rüdinger, M. Schütze
Beitrag zum Zeitstandverhalten von Titan für die Anwendung im chemischen Apparatebau
Mat.-wiss. u. Werkstofftechn. 22 (1991) 1

 

Nanotechnology

W. Fürbeth, H.-Q. Nguyen, F. Dettenwanger, M. Schütze
Development of new corrosion resistant coatings for light metals by sintering of nanopowders
Proc. Eurocorr 2000 (CD), London
W. Fürbeth, H.-Q. Nguyen, F. Dettenwanger, M. Schütze
New developments for corrosion resistant coatings for light metals and steel based on chemical nanotechnology
Proc. EUROCORR 2001 (CD) Associazione Italiana di Metallurgia, Milano (2001)
H.-Q. Nguyen, W. Fürbeth, M. Schütze
Nano-enamel: a new way to produce glass-like protective coatings for metals
Materials and Corrosion 53 (2002) 772-782
W. Fürbeth, H.-Q. Nguyen, M. Schütze
Development of new corrosion resistant coatings based on chemical nanotechnology
Proc. Int. Symposium "Corrosion Science in the 21st century", UMIST, Manchester (2003) (CD), The Journal of Corrosion Science and Engineering, Vol. 6 (2003)
W. Fürbeth, H.-Q. Nguyen, M. Schütze
Nanoenamel - new technologies for functional coatings
ACHEMA-Magazine/ Special edition of Process, Vogel Verlag (2003) 74-75
W. Fürbeth, H.-Q. Nguyen, M. Schütze
Nanopulver-Schichten als Korrosionsschutz für Leichtmetallegierungen
Tagungsband 1. KKF-Kolloquium Gemeinsame Forschung im Korrosionsschutz - Problemlösungen für den metallischen Leichtbau, January 2003, GfKORR e.V., Frankfurt (2003)
W. Fürbeth, H.-Q. Nguyen, M. Schütze
Neue Korrosionsschutzschichten für Metalle auf der Basis chemischer Nanotechnologie
Proc. Oberflächentage 2003, DGO, Düsseldorf (2003)
W. Fürbeth, H.-Q. Nguyen, M. Schütze
Kleine Ursache mit großer Wirkung: Neue Korrosionsschutzschichten für Metalle auf Basis chemischer Nanotechnologie
Metalloberfläche 58 (2004) 31-36
S. Benfer, W. Fürbeth, M. Schütze
Emailreparatur mit nanopartikulären Schichten
Mitteilungen des Deutschen Emailverbandes e.V. 53/5 (2005) 74-83
S. Benfer, W. Fürbeth, M. Schütze
Entwicklung von nanopartikelbasierten Schichten für die Emailreparatur
Tagungsband 6. Industriefachtagung Oberflächen- und Wärmebehandlungstechnik & 8. Werkstofftechnisches Kolloquium, Chemnitz (2005)
W. Fürbeth, S. Benfer, M. Schütze
Repair of technical enamels through nanotechnology
Proc. EUROCORR 2005, Lissabon (2005)
W. Fürbeth, H.-Q. Nguyen. M. Schütze
Nanopartikelbasierte Korrosionsschutzschichten für Leichtmetalle
Tagungsband Thüringer Grenz- und Oberflächentage, Jena (2005)
W. Fürbeth, H.-Q. Nguyen, M. Schütze
Neuartige Korrosionsschutzschichten für Metalle auf der Basis oxidischer Nanopartikel
Tagungsband 6. Wörlitzer Workshop Funktionelle Schichten, Europäische Forschungsgesellschaft Dünne Schichten e.V., Dresden (2005)
W. Fürbeth, M. Schütze
Novel corrosion protective coatings based on nanomaterials
Report Nato-RTO Specialist Meeting AVT-122 Nanomaterials Technology for Military Vehicle Structural Applications, Granada (2005)
S. Benfer, W. Fürbeth, M. Schütze
Email vor Ort reparieren
cav - Chemie-Anlagen + Verfahren (2006) (5) 44-46
F. Feil, W. Fürbeth, M.Schütze
Kleine Teilchen auf leichtem Metall - Nanopartikel-basierte anorganische Schutzschichten für Magnesiumwerkstoffe
Metalloberfläche 60 (11) (2006) 38-41
F. Feil, W. Fürbeth, M.Schütze
Nanopartikel-basierte anorganische Schutzschichten für Magnesiumwerkstoffe
Tagungsband Oberflächentage, Bonn (2006)

 

Reviews

M. Schütze
Fundamentals of High Temperature Corrosion
in "Corrosion and Environmental Degradation", Eds. R.W. Cahn et al., Wiley-VCH (2000) 67-130
W. Fürbeth, M. Schütze
Progress in corrosion protection as a requirement for technical progress
Materials and Corrosion 60 (2009) 481-494
M. Schütze
Konzepte für die Entwicklung von Schutzschichten für aggressive Hochtemperaturumgebungen
in "Dampferzeugerkorrosion", Saxonia Standortentwicklungs- und -verwaltungsgesellschaft mbH, Freiberg/Sachsen (2009) 169-188
M. Schütze, W. Fürbeth
Innovative Entwicklungen im Bereich Korrosionsschutz von Metallen
Tagungsband 5. Thüringer Grenz- und Oberflächentage, Innovent e.V., Jena (2009) 65-73
M. Schütze
Diffusion Aspects in High Temperature Corrosion and in the Development of Protective Coatings
Defect and Diffusion Forum 323-325 (2012)19-29

 

Books

M. Schütze
Die Korrosionsschutzwirkung oxidischer Deckschichten unter thermisch-chemisch-mechanischer Werkstoffbeanspruchung
Materialkundlich-Technische Reihe, Vol. 10, Eds. G. Petzow, F. Jeglitsch, Gebr. Borntraeger Verlag, Berlin 1991
H.J. Grabke, M. Schütze (Eds.)
Oxidation of Intermetallics
Wiley-VCH, Weinheim 1997
M. Schütze
Protective Oxide Scales and Their Breakdown
Series on Corrosion and Protection, Vol. 1, Ed. D.R. Holmes, John Wiley and Sons, Chichester 1997
M. Schütze, W.J. Quadakkers (Eds.)
Cyclic Oxidation of High Temperature Materials
The Institute of Materials, London 1999
G. Schmitt, M. Schütze (Eds.)
Solution of Corrosion Problems in Advanced Technologies
DECHEMA, Frankfurt am Main 1999
M. Schütze (Ed.)
Corrosion and Environmental Degradation
Vol. 19 of "Materials Science and Technology", Series Eds. R.W. Cahn et al., Wiley-VCH, Weinheim 2000
M. Schütze, W.J. Quadakkers, J.R. Nicholls (Eds.)
Lifetime Modelling of High Temperature Corrosion Processes
Maney Publishing, London 2001
G. Kreysa, M. Schütze (Eds.)
Corrosion Handbook, Vol. 1: Sodium Hydroxide, Mixed Acids
DECHEMA e.V., WILEY-VCH, Frankfurt am Main and Weinheim 2005
G. Kreysa, M. Schütze (Eds.)
Corrosion Handbook, Vol. 2: Hydrochloric Acid, Nitric Acid
DECHEMA e.V., WILEY-VCH, Frankfurt am Main and Weinheim 2005
G. Kreysa, M. Schütze (Eds.)
Corrosion Handbook, Vol. 3: Hypochlorites, Phosphoric Acid
DECHEMA e.V., WILEY-VCH, Frankfurt am Main and Weinheim 2005
G. Kreysa, M. Schütze (Eds.)
Corrosion Handbook, Vol. 4: Drinking Water, Waste Water (Municipal), Waste Water (Industrial)
DECHEMA e.V., WILEY-VCH, Frankfurt am Main and Weinheim 2005
G. Kreysa, M. Schütze (Eds.)
Corrosion Handbook, Vol. 5: Carbonic Acid, Chlorine Dioxide, Seawater
DECHEMA e.V., WILEY-VCH, Frankfurt am Main and Weinheim 2005
G. Kreysa, M. Schütze (Eds.)
Corrosion Handbook, Vol. 6: Atmosphere, Industrial Waste Gases
DECHEMA e.V., WILEY-VCH, Frankfurt am Main and Weinheim 2006
G. Kreysa, M. Schütze (Eds.)
Corrosion Handbook, Vol. 7: Sodium Chloride
DECHEMA e.V., WILEY-VCH, Frankfurt am Main and Weinheim 2006
H.J. Grabke, M. Schütze (Eds.)
Corrosion by carbon and nitrogen: Metal dusting, carburisation and nitridation
Woodhead Publishing, Cambridge 2007
G. Kreysa, M. Schütze (Eds.)
Corrosion Handbook, Vol. 8, Part A: Chlorinated Hydrocarbons - Chloromethanes
DECHEMA e.V., WILEY-VCH, Frankfurt am Main and Weinheim 2007
G. Kreysa, M. Schütze (Eds.)
Corrosion Handbook, Vol. 8, Part B: Chlorinated Hydrocarbons - Chloroethanes, Alkanols
DECHEMA e.V., WILEY-VCH, Frankfurt am Main and Weinheim 2007
G. Kreysa, M. Schütze (Eds.)
Corrosion Handbook, Vol. 9: Potassium Hydroxide, Ammonium and Ammonium Hydroxide
DECHEMA e.V., WILEY-VCH, Frankfurt am Main and Weinheim 2007
M. Schütze, M. Malessa (Eds.)
Standardisation of thermal cycling exposure testing
Woodhead Publishing, Cambridge 2007
E. Berghof-Hasselbächer, P. Gawenda, M. Schorr, M. Schütze, J.J. Hoffman
Atlas of Microstructures
Materials Technology Institute, St. Louis 2008
G. Kreysa, M. Schütze (Eds.)
Corrosion Handbook, Vol. 10: Sulfur Dioxide, Sodium Sulfate
DECHEMA e.V., WILEY-VCH, Frankfurt am Main and Weinheim 2008
G. Kreysa, M. Schütze (Eds.)
Corrosion Handbook, Vol. 11: Sulfuric Acid
DECHEMA e.V., WILEY-VCH, Frankfurt am Main and Weinheim 2008
M. Schütze, W.J. Quadakkers (Eds.)
Novel approaches to improving high temperature corrosion resistance
EFC no. 47, Woodhead, Cambridge 2008
G. Kreysa, M. Schütze (Eds.)
Corrosion Handbook, Vol. 12: Ferrous Chlorides
DECHEMA e.V., WILEY-VCH, Frankfurt am Main and Weinheim 2009

 

Contributions to Newspapers

C. Hirche, M. Schütze
Werkstoffinnovationen öffnen den Weg zu hochleistungsfähigen neuen Produkten
Frankfurter Allgemeine Zeitung, 7. December 1992
P.P. Schepp, M. Schütze
Messen, Tagungen, Veranstaltungen - auf den Erfahrungsaustausch kommt es bei Werkstoffen an
Frankfurter Allgemeine Zeitung, 25. January 1993
M. Schütze
Hitze läßt neue Werkstoffe kalt
Chemische Industrie 10 (1993) 38-40
M. Schütze
Aus dem Weltraum auf die Erde geholt
Chemische Industrie 12 (1995) 39-40
M. Schütze
Korrosion in der Hochtemperaturtechnik
Spektrum der Wissenschaft July (1998) 100-108
M. Schütze
Beschichtete Stahlbehälter halten aggressiven Medien stand
Handelsblatt, 21. April 1999
M. Schütze
Korrosion - Vergangenheit, Heute und Zukunft
Chemie Ingenieur Technik 75 (2003) 1534-1538
M. Schütze
Chemiewerkstoffe
Werkstoffe in der Fertigung (2005) 4
M. Schütze
Was Menschen bewegt, die etwas bewegen
CITplus 1/2 (2006) 6

© DECHEMA e.V. 1995-2013, Last update 06.05.2013